Export limit exceeded: 416202 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 30292 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 416202 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26202 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26202 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] | ||||
| CVE-2023-54270 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: usb: siano: Fix use after free bugs caused by do_submit_urb There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+ ---truncated--- | ||||
| CVE-2023-54274 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Add a check for valid 'mad_agent' pointer When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously. In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent. This issue can hit when RoCE driver unregisters ib_device Stack Trace: ------------ BUG: kernel NULL pointer dereference, address: 000000000000004d PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020 Workqueue: bnxt_re bnxt_re_task [bnxt_re] RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40 Call Trace: ib_unregister_mad_agent+0x46/0x2f0 [ib_core] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready ? __schedule+0x20b/0x560 srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt] srpt_remove_one+0x20/0x150 [ib_srpt] remove_client_context+0x88/0xd0 [ib_core] bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex disable_device+0x8a/0x160 [ib_core] bond0: active interface up! ? kernfs_name_hash+0x12/0x80 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247 __ib_unregister_device+0x42/0xb0 [ib_core] (NULL device *): Master: mode: 4 num_slaves:2 ib_unregister_device+0x22/0x30 [ib_core] (NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0 bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re] bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] | ||||
| CVE-2023-54278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vmem: split pages when debug pagealloc is enabled Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. | ||||
| CVE-2025-40339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved. | ||||
| CVE-2023-54282 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: tuners: qt1010: replace BUG_ON with a regular error BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 | ||||
| CVE-2023-54287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: imx: disable Ageing Timer interrupt request irq There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. | ||||
| CVE-2023-54288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fortify the spinlock against deadlock by interrupt In the function ieee80211_tx_dequeue() there is a particular locking sequence: begin: spin_lock(&local->queue_stop_reason_lock); q_stopped = local->queue_stop_reasons[q]; spin_unlock(&local->queue_stop_reason_lock); However small the chance (increased by ftracetest), an asynchronous interrupt can occur in between of spin_lock() and spin_unlock(), and the interrupt routine will attempt to lock the same &local->queue_stop_reason_lock again. This will cause a costly reset of the CPU and the wifi device or an altogether hang in the single CPU and single core scenario. The only remaining spin_lock(&local->queue_stop_reason_lock) that did not disable interrupts was patched, which should prevent any deadlocks on the same CPU/core and the same wifi device. This is the probable trace of the deadlock: kernel: ================================ kernel: WARNING: inconsistent lock state kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G W kernel: -------------------------------- kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes: kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40 kernel: {IN-SOFTIRQ-W} state was registered at: kernel: lock_acquire+0xc7/0x2d0 kernel: _raw_spin_lock+0x36/0x50 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm] kernel: ieee80211_queue_skb+0x450/0x730 [mac80211] kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211] kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211] kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211] kernel: dev_hard_start_xmit+0xb5/0x260 kernel: __dev_queue_xmit+0xdbe/0x1200 kernel: neigh_resolve_output+0x166/0x260 kernel: ip_finish_output2+0x216/0xb80 kernel: __ip_finish_output+0x2a4/0x4d0 kernel: ip_finish_output+0x2d/0xd0 kernel: ip_output+0x82/0x2b0 kernel: ip_local_out+0xec/0x110 kernel: igmpv3_sendpack+0x5c/0x90 kernel: igmp_ifc_timer_expire+0x26e/0x4e0 kernel: call_timer_fn+0xa5/0x230 kernel: run_timer_softirq+0x27f/0x550 kernel: __do_softirq+0xb4/0x3a4 kernel: irq_exit_rcu+0x9b/0xc0 kernel: sysvec_apic_timer_interrupt+0x80/0xa0 kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30 kernel: _raw_spin_unlock_irqrestore+0x3f/0x70 kernel: free_to_partial_list+0x3d6/0x590 kernel: __slab_free+0x1b7/0x310 kernel: kmem_cache_free+0x52d/0x550 kernel: putname+0x5d/0x70 kernel: do_sys_openat2+0x1d7/0x310 kernel: do_sys_open+0x51/0x80 kernel: __x64_sys_openat+0x24/0x30 kernel: do_syscall_64+0x5c/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc kernel: irq event stamp: 5120729 kernel: hardirqs last enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120 kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120 kernel: softirqs last enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: other info that might help us debug this: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&local->queue_stop_reason_lock); kernel: <Interrupt> kernel: lock(&local->queue_stop_reason_lock); kernel: *** DEADLOCK *** kernel: 8 locks held by kworker/5:0/25656: kernel: #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530 kernel: #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530 kernel: #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #3: ffff9d619 ---truncated--- | ||||
| CVE-2023-54298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: quark_dts: fix error pointer dereference If alloc_soc_dts() fails, then we can just return. Trying to free "soc_dts" will lead to an Oops. | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||
| CVE-2023-54307 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp_qoriq: fix memory leak in probe() Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. | ||||
| CVE-2023-54311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock when converting an inline directory in nojournal mode In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock by calling ext4_handle_dirty_dirblock() when it already has taken the directory lock. There is a similar self-deadlock in ext4_incvert_inline_data_nolock() for data files which we'll fix at the same time. A simple reproducer demonstrating the problem: mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64 mount -t ext4 -o dirsync /dev/vdc /vdc cd /vdc mkdir file0 cd file0 touch file0 touch file1 attr -s BurnSpaceInEA -V abcde . touch supercalifragilisticexpialidocious | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-54314 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: af9005: Fix null-ptr-deref in af9005_i2c_xfer In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2023-54319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: at91-pio4: check return value of devm_kasprintf() devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks") Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") | ||||
| CVE-2023-54320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2() Function amd_pmc_stb_debugfs_open_v2() may be called when the STB debug mechanism enabled. When amd_pmc_send_cmd() fails, the 'buf' needs to be released. | ||||
| CVE-2025-23282 | 2 Linux, Nvidia | 3 Linux, Display Driver, Driver | 2026-04-15 | 7 High |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker might be able to use a race condition to escalate privileges. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. | ||||
| CVE-2025-39999 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix blk_mq_tags double free while nr_requests grown In the case user trigger tags grow by queue sysfs attribute nr_requests, hctx->sched_tags will be freed directly and replaced with a new allocated tags, see blk_mq_tag_update_depth(). The problem is that hctx->sched_tags is from elevator->et->tags, while et->tags is still the freed tags, hence later elevator exit will try to free the tags again, causing kernel panic. Fix this problem by replacing et->tags with new allocated tags as well. Noted there are still some long term problems that will require some refactor to be fixed thoroughly[1]. [1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/ | ||||
| CVE-2025-40002 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix use-after-free in tb_dp_dprx_work The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(), which does not ensure that the delayed work item tunnel->dprx_work has fully completed if it was already running. This leads to use-after-free scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while tunnel->dprx_work remains active and attempts to dereference tb_tunnel in tb_dp_dprx_work(). A typical race condition is illustrated below: CPU 0 | CPU 1 tb_dp_tunnel_active() | tb_deactivate_and_free_tunnel()| tb_dp_dprx_start() tb_tunnel_deactivate() | queue_delayed_work() tb_dp_activate() | tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker cancel_delayed_work() | tb_tunnel_put(tunnel); | | tunnel = container_of(...); //UAF | tunnel-> //UAF Replacing cancel_delayed_work() with cancel_delayed_work_sync() is not feasible as it would introduce a deadlock: both tb_dp_dprx_work() and the cleanup path acquire tb->lock, and cancel_delayed_work_sync() would wait indefinitely for the work item that cannot proceed. Instead, implement proper reference counting: - If cancel_delayed_work() returns true (work is pending), we release the reference in the stop function. - If it returns false (work is executing or already completed), the reference is released in delayed work function itself. This ensures the tb_tunnel remains valid during work item execution while preventing memory leaks. This bug was found by static analysis. | ||||
| CVE-2025-40004 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix buffer overflow in USB transport layer A buffer overflow vulnerability exists in the USB 9pfs transport layer where inconsistent size validation between packet header parsing and actual data copying allows a malicious USB host to overflow heap buffers. The issue occurs because: - usb9pfs_rx_header() validates only the declared size in packet header - usb9pfs_rx_complete() uses req->actual (actual received bytes) for memcpy This allows an attacker to craft packets with small declared size (bypassing validation) but large actual payload (triggering overflow in memcpy). Add validation in usb9pfs_rx_complete() to ensure req->actual does not exceed the buffer capacity before copying data. | ||||