Export limit exceeded: 416156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26252 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26252 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40296 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Fix double free of GPIO device during unregister regulator_unregister() already frees the associated GPIO device. On ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to random failures when other drivers (typically Intel THC) attempt to allocate interrupts. The root cause is that the reference count of the pinctrl_intel_platform module unexpectedly drops to zero when this driver defers its probe. This behavior can also be reproduced by unloading the module directly. Fix the issue by removing the redundant release of the GPIO device during regulator unregistration. | ||||
| CVE-2022-50628 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: Fix UBSAN warning UBSAN complains about invalid value for bool: [ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1 [ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device [ 101.213426] usbcore: registered new interface driver gud [ 101.989431] ================================================================================ [ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9 [ 101.989447] load of value 121 is not a valid value for type '_Bool' [ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3 [ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018 [ 101.989459] Workqueue: events_long gud_flush_work [gud] [ 101.989471] Call Trace: [ 101.989474] <TASK> [ 101.989479] dump_stack_lvl+0x49/0x5f [ 101.989488] dump_stack+0x10/0x12 [ 101.989493] ubsan_epilogue+0x9/0x3b [ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 101.989504] dma_buf_vmap.cold+0x38/0x3d [ 101.989511] ? find_busiest_group+0x48/0x300 [ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper] [ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper] [ 101.989535] drm_gem_vmap+0x26/0x60 [drm] [ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper] [ 101.989630] gud_prep_flush+0xc1/0x710 [gud] [ 101.989639] ? _raw_spin_lock+0x17/0x40 [ 101.989648] gud_flush_work+0x1e0/0x430 [gud] [ 101.989653] ? __switch_to+0x11d/0x470 [ 101.989664] process_one_work+0x21f/0x3f0 [ 101.989673] worker_thread+0x200/0x3e0 [ 101.989679] ? rescuer_thread+0x390/0x390 [ 101.989684] kthread+0xfd/0x130 [ 101.989690] ? kthread_complete_and_exit+0x20/0x20 [ 101.989696] ret_from_fork+0x22/0x30 [ 101.989706] </TASK> [ 101.989708] ================================================================================ The source of this warning is in iosys_map_clear() called from dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The iosys_map variables are allocated uninitialized on the stack leading to ->is_iomem having all kinds of values and not only 0/1. Fix this by zeroing the iosys_map variables. | ||||
| CVE-2022-50631 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: kexec: Fix memory leak of fdt buffer This is reported by kmemleak detector: unreferenced object 0xff60000082864000 (size 9588): comm "kexec", pid 146, jiffies 4294900634 (age 64.788s) hex dump (first 32 bytes): d0 0d fe ed 00 00 12 ed 00 00 00 48 00 00 11 40 ...........H...@ 00 00 00 28 00 00 00 11 00 00 00 02 00 00 00 00 ...(............ backtrace: [<00000000f95b17c4>] kmemleak_alloc+0x34/0x3e [<00000000b9ec8e3e>] kmalloc_order+0x9c/0xc4 [<00000000a95cf02e>] kmalloc_order_trace+0x34/0xb6 [<00000000f01e68b4>] __kmalloc+0x5c2/0x62a [<000000002bd497b2>] kvmalloc_node+0x66/0xd6 [<00000000906542fa>] of_kexec_alloc_and_setup_fdt+0xa6/0x6ea [<00000000e1166bde>] elf_kexec_load+0x206/0x4ec [<0000000036548e09>] kexec_image_load_default+0x40/0x4c [<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322 [<0000000040c62c03>] ret_from_syscall+0x0/0x2 In elf_kexec_load(), a buffer is allocated via kvmalloc() to store fdt. While it's not freed back to system when kexec kernel is reloaded or unloaded. Then memory leak is caused. Fix it by introducing riscv specific function arch_kimage_file_post_load_cleanup(), and freeing the buffer there. | ||||
| CVE-2023-54296 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Get source vCPUs from source VM for SEV-ES intrahost migration Fix a goof where KVM tries to grab source vCPUs from the destination VM when doing intrahost migration. Grabbing the wrong vCPU not only hoses the guest, it also crashes the host due to the VMSA pointer being left NULL. BUG: unable to handle page fault for address: ffffe38687000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 39 PID: 17143 Comm: sev_migrate_tes Tainted: GO 6.5.0-smp--fff2e47e6c3b-next #151 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.28.0 07/10/2023 RIP: 0010:__free_pages+0x15/0xd0 RSP: 0018:ffff923fcf6e3c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffe38687000000 RCX: 0000000000000100 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffe38687000000 RBP: ffff923fcf6e3c88 R08: ffff923fcafb0000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff83619b90 R12: ffff923fa9540000 R13: 0000000000080007 R14: ffff923f6d35d000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff929d0d7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe38687000000 CR3: 0000005224c34005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> sev_free_vcpu+0xcb/0x110 [kvm_amd] svm_vcpu_free+0x75/0xf0 [kvm_amd] kvm_arch_vcpu_destroy+0x36/0x140 [kvm] kvm_destroy_vcpus+0x67/0x100 [kvm] kvm_arch_destroy_vm+0x161/0x1d0 [kvm] kvm_put_kvm+0x276/0x560 [kvm] kvm_vm_release+0x25/0x30 [kvm] __fput+0x106/0x280 ____fput+0x12/0x20 task_work_run+0x86/0xb0 do_exit+0x2e3/0x9c0 do_group_exit+0xb1/0xc0 __x64_sys_exit_group+0x1b/0x20 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> CR2: ffffe38687000000 | ||||
| CVE-2022-50856 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_ses_add_channel() Before return, should free the xid, otherwise, the xid will be leaked. | ||||
| CVE-2025-40192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "ipmi: fix msg stack when IPMI is disconnected" This reverts commit c608966f3f9c2dca596967501d00753282b395fc. This patch has a subtle bug that can cause the IPMI driver to go into an infinite loop if the BMC misbehaves in a certain way. Apparently certain BMCs do misbehave this way because several reports have come in recently about this. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50835 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: add miss release buffer head in fc_do_one_pass() In fc_do_one_pass() miss release buffer head after use which will lead to reference count leak. | ||||
| CVE-2022-50838 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stream: purge sk_error_queue in sk_stream_kill_queues() Changheon Lee reported TCP socket leaks, with a nice repro. It seems we leak TCP sockets with the following sequence: 1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket. Each ACK will cook an skb put in error queue, from __skb_tstamp_tx(). __skb_tstamp_tx() is using skb_clone(), unless SOF_TIMESTAMPING_OPT_TSONLY was also requested. 2) If the application is also using MSG_ZEROCOPY, then we put in the error queue cloned skbs that had a struct ubuf_info attached to them. Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc() does a sock_hold(). As long as the cloned skbs are still in sk_error_queue, socket refcount is kept elevated. 3) Application closes the socket, while error queue is not empty. Since tcp_close() no longer purges the socket error queue, we might end up with a TCP socket with at least one skb in error queue keeping the socket alive forever. This bug can be (ab)used to consume all kernel memory and freeze the host. We need to purge the error queue, with proper synchronization against concurrent writers. | ||||
| CVE-2022-50859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list") extend the dialects from 3 to 4, but forget to decrease the extended length when specific the dialect, then the message length is larger than expected. This maybe leak some info through network because not initialize the message body. After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is reduced from 28 bytes to 26 bytes. | ||||
| CVE-2023-54289 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix NULL dereference in error handling Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL. | ||||
| CVE-2022-50886 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: toshsd: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called. | ||||
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2023-54167 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: mm: Move initrd phys_to_virt handling after paging_init() When booting with an initial ramdisk on platforms where physical memory does not start at address zero (e.g. on Amiga): initrd: 0ef0602c - 0f800000 Zone ranges: DMA [mem 0x0000000008000000-0x000000f7ffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000008000000-0x000000000f7fffff] Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff] Unable to handle kernel access at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<00201d3c>] memcmp+0x28/0x56 As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must not be called before paging_init(). Hence postpone the phys_to_virt handling for the initial ramdisk until after calling paging_init(). While at it, reduce #ifdef clutter by using IS_ENABLED() instead. | ||||
| CVE-2023-54175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path The xiic_xfer() function gets a runtime PM reference when the function is entered. This reference is released when the function is exited. There is currently one error path where the function exits directly, which leads to a leak of the runtime PM reference. Make sure that this error path also releases the runtime PM reference. | ||||
| CVE-2025-71199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove. | ||||
| CVE-2025-40004 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix buffer overflow in USB transport layer A buffer overflow vulnerability exists in the USB 9pfs transport layer where inconsistent size validation between packet header parsing and actual data copying allows a malicious USB host to overflow heap buffers. The issue occurs because: - usb9pfs_rx_header() validates only the declared size in packet header - usb9pfs_rx_complete() uses req->actual (actual received bytes) for memcpy This allows an attacker to craft packets with small declared size (bypassing validation) but large actual payload (triggering overflow in memcpy). Add validation in usb9pfs_rx_complete() to ensure req->actual does not exceed the buffer capacity before copying data. | ||||
| CVE-2022-50643 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_copy_file_range() If the file is used by swap, before return -EOPNOTSUPP, should free the xid, otherwise, the xid will be leaked. | ||||
| CVE-2023-54239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Check for uptr overflow syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||