Export limit exceeded: 109329 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (109329 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72693 | 1 Redhat | 6 Enterprise Linux, Hardened Images, Hummingbird and 3 more | 2026-11-05 | 7.8 High |
| `openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path. | ||||
| CVE-2026-116787 | 1 Signalwire | 1 Freeswitch | 2026-11-05 | 7.5 High |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, mod_event_socket used an unauthenticated Content-Length value directly as the allocation size for an Event Socket message body. Negative or extremely large values could overflow the terminator calculation or force an allocation failure through a helper that aborts the FreeSWITCH process. The header is parsed before the Event Socket password, so any host admitted by apply-inbound-acl can trigger termination with its first packet; the default loopback ACL limits ordinary installations to local clients. The outbound socket dialplan path is also affected when FreeSWITCH connects to a hostile application server, and process termination drops every active call until the service is restarted. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-116782 | 1 Signalwire | 1 Freeswitch | 2026-11-05 | 7.5 High |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_i_connect() passed the first RTMP connect argument to amf0_object_get() without checking whether the AMF value was an object. A string or number in place of an AMF object caused union bytes from the message to be interpreted as node pointers and dereferenced. Any client with network access to an enabled mod_rtmp listener could send the malformed connect command before login; the module is disabled in the stock build and configuration. The invalid read reliably crashes FreeSWITCH and ends every active call, while no write, memory disclosure, or code execution has been demonstrated. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-116568 | 1 Signalwire | 1 Freeswitch | 2026-11-05 | 7.5 High |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_rtmp2rtpH264() trusted the length prefix of each inbound H.264 NAL unit without checking it against the bytes remaining in the RTMP message. An oversized declared unit underflowed the unsigned remaining-byte counter and advanced the parser beyond its receive buffer, where the next length-prefix read could crash the process. The flaw affects deployments that build and load mod_rtmp and accept video call sessions, commonly on TCP port 1935; placing the call requires a directory login where auth-calls is true, while no credentials are required where auth-calls is absent or false. A remote client can terminate FreeSWITCH and every active call, but the defect supplies no write primitive and memory disclosure has not been demonstrated. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-117500 | 1 Libwww-perl | 1 Http-body | 2026-11-05 | 7.5 High |
| HTTP::Body versions before 1.24_01 for Perl allow CPU exhaustion via regex backtracking on the filename of a multipart upload. For every file part, the multipart parser finds the suffix of the uploaded filename by matching the default $basename_regexp, qr/[^.]+(\.[^\\\/]+)$/, against the whole basename. A basename made of many dots and ending in a backslash makes the regex backtrack in time quadratic in its length. A remote attacker can exhaust CPU with one request, as a basename of about 32 KB takes several seconds to match and every file part is matched separately. | ||||
| CVE-2026-116268 | 1 Perl | 1 Mime::field::paramval | 2026-11-05 | 7.5 High |
| MIME::Field::ParamVal versions before 5.521 for Perl allow CPU exhaustion via unclosed comments in header parameters. The comment pattern used to parse Content-Type and Content-Disposition parameters scans from each "(" to the next ")". In a field with no ")", every "(" scans to the end of the header and fails, so parsing takes time quadratic in the header length. The field is parsed again on each attribute lookup, several times per MIME entity. A 40 KB header takes about 7 seconds to parse once. | ||||
| CVE-2026-116271 | 1 Perl | 1 Mime::parser::fileunder | 2026-11-05 | 7 High |
| MIME::Parser::FileUnder versions before 5.521 for Perl reuse a pre-created output directory and follow symlinks in it, letting local users redirect attachment writes. Each message is written to a directory named msg-<time>-<pid>-<n> under the output base, and an existing directory of that name is used as is. A file name counts as unused when nothing exists at that path, which holds for a dangling symlink, and the body file is then opened in a way that follows the link. When the output base is writable by other users, as with output_under("/tmp"), a local user can pre-create the directory with a symlink named like an attachment. The parser then writes the attachment to the link target with the privileges of the parsing process. | ||||
| CVE-2026-111768 | 2026-11-05 | 7.5 High | ||
| The Model Context Protocol TypeScript SDK provides TypeScript client and server implementations of the Model Context Protocol. From 1.3.0 until 1.32.0 in @modelcontextprotocol/sdk and from 2.0.0 until 2.3.0 in @modelcontextprotocol/server, HTTP servers did not enforce a limit on the number of array elements and object keys validated in one request. The affected surface is validation of HTTP requests containing arrays or object keys. The trigger is an array-element or object-key validation workload large enough to exhaust memory while remaining within the request size limit. A single request within the default 4 MiB limit can terminate the process with JavaScript heap exhaustion. No credentials are required unless the application authenticates before SDK processing. Tools accepting arrays or records carry the greatest risk. stdio-only servers do not expose the HTTP request path. Upgrading alone does not enable the new validation bound. Operators must configure both a tool-input element bound and an appropriate request body size limit. This issue is fixed in @modelcontextprotocol/sdk 1.32.0 and @modelcontextprotocol/server 2.3.0. | ||||
| CVE-2026-121113 | 1 Google | 1 Chrome | 2026-11-05 | 8.8 High |
| Buffer overflow in PDFium in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted PDF file. (Chromium security severity: High) | ||||
| CVE-2026-91914 | 1 Dell | 1 Openmanage Enterprise | 2026-11-05 | 7.1 High |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Authentication Bypass by Spoofing vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Session theft. | ||||
| CVE-2026-84294 | 2 Progress, Progress Software | 2 Ws Ftp Server, Ws Ftp Server | 2026-11-05 | 7.7 High |
| Improper limitation of pathname in the Ad Hoc Transfer component of Progress Software WS_FTP Server versions prior to 2024.0.6 and 2025.0.3 on Windows could allow an authenticated user to access files outside intended directories. | ||||
| CVE-2026-31580 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made. | ||||
| CVE-2026-31568 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add missing secure storage access fixups for donated memory There are special cases where secure storage access exceptions happen in a kernel context for pages that don't have the PG_arch_1 bit set. That bit is set for non-exported guest secure storage (memory) but is absent on storage donated to the Ultravisor since the kernel isn't allowed to export donated pages. Prior to this patch we would try to export the page by calling arch_make_folio_accessible() which would instantly return since the arch bit is absent signifying that the page was already exported and no further action is necessary. This leads to secure storage access exception loops which can never be resolved. With this patch we unconditionally try to export and if that fails we fixup. | ||||
| CVE-2026-31530 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use after free of parent_port in cxl_detach_ep() cxl_detach_ep() is called during bottom-up removal when all CXL memory devices beneath a switch port have been removed. For each port in the hierarchy it locks both the port and its parent, removes the endpoint, and if the port is now empty, marks it dead and unregisters the port by calling delete_switch_port(). There are two places during this work where the parent_port may be used after freeing: First, a concurrent detach may have already processed a port by the time a second worker finds it via bus_find_device(). Without pinning parent_port, it may already be freed when we discover port->dead and attempt to unlock the parent_port. In a production kernel that's a silent memory corruption, with lock debug, it looks like this: []DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current()) []WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310 []Call Trace: []mutex_unlock+0xd/0x20 []cxl_detach_ep+0x180/0x400 [cxl_core] []devm_action_release+0x10/0x20 []devres_release_all+0xa8/0xe0 []device_unbind_cleanup+0xd/0xa0 []really_probe+0x1a6/0x3e0 Second, delete_switch_port() releases three devm actions registered against parent_port. The last of those is unregister_port() and it calls device_unregister() on the child port, which can cascade. If parent_port is now also empty the device core may unregister and free it too. So by the time delete_switch_port() returns, parent_port may be free, and the subsequent device_unlock(&parent_port->dev) operates on freed memory. The kernel log looks same as above, with a different offset in cxl_detach_ep(). Both of these issues stem from the absence of a lifetime guarantee between a child port and its parent port. Establish a lifetime rule for ports: child ports hold a reference to their parent device until release. Take the reference when the port is allocated and drop it when released. This ensures the parent is valid for the full lifetime of the child and eliminates the use after free window in cxl_detach_ep(). This is easily reproduced with a reload of cxl_acpi in QEMU with CXL devices present. | ||||
| CVE-2026-31527 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: driver core: platform: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-31500 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 | ||||
| CVE-2026-31493 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context. | ||||
| CVE-2026-31485 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). | ||||
| CVE-2026-31455 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | ||||
| CVE-2026-31452 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | ||||