Export limit exceeded: 16198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16198 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98568 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use one headroom snapshot for neighbour replies vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then samples it again to reserve headroom. A concurrent vxlan_changelink() can update needed_headroom between the two reads, creating a TOCTOU race. The second value can exceed the allocation and make the Ethernet header write out of bounds. The race is reproducible on the unpatched kernel. It occurred when vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte skbuff_small_head allocation. Snapshot the headroom once and use that value for both allocation and reservation. | ||||
| CVE-2026-98493 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. | ||||
| CVE-2026-98456 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. | ||||
| CVE-2026-98265 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity data_ep_set_params() allocates each data URB for exactly u->packets isochronous frames, so urb->iso_frame_desc[] has u->packets slots and ctx->packets is the driver's only record of that limit. For an implicit feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the sync source's packet count, which is calculated independently from the capture endpoint's parameters. When that count is larger, prepare_playback_urb() and prepare_silent_urb() can write iso_frame_desc[] past the allocation; their existing bounds limit payload bytes, not the descriptor index. The reproducer uses a high-speed UAC2 device declaring bInterval 1 for implicit feedback capture (8 packets) and bInterval 4 for playback (1 packet). On the first capture completion after the stream starts, it accesses seven descriptors spanning 112 bytes beyond the one-packet URB: BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560) Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178 prepare_playback_urb (sound/usb/pcm.c:1560) prepare_outbound_urb (sound/usb/endpoint.c:340) snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501) snd_complete_urb (sound/usb/endpoint.c:1834) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107) kthread (kernel/kthread.c:436) The buggy address belongs to the object at ffff88801e696a00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0) Record the allocated packet count per endpoint and clamp both the adopted count and the packet-size copy to it. Fold the Format Type II delimiter into urb_packs before the allocation loop so the recorded limit matches every URB. | ||||
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||
| CVE-2026-97535 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selects its target virtual port by setting one bit in vp_idx_map, a fixed 16-byte (128-bit) array in both vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb() computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map] without checking that map stays within the array. max_npiv_vports is taken from firmware and only sanitized to a MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or 255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports. A vp_index above 128 therefore yields map >= 16 and an out-of-bounds write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB fields (or the adjacent request-ring slot on the 64-byte layout). Reject a vp_index that cannot be represented in the IOCB bitmap in qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual 63 or 127 NPIV vports are unaffected. | ||||
| CVE-2026-97518 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject duplicate wiphy cipher suite entries Duplicate entries in wiphy->cipher_suites do not describe any additional capability, but cfg80211 currently accepts them and leaves individual consumers to deal with them. One such consumer is the WEXT compatibility code, which appends a WEP key length for each WEP cipher entry it sees. Repeated WEP entries can therefore overflow the fixed iw_range::encoding_size array returned by SIOCGIWRANGE. Reject duplicate cipher suite entries in wiphy_register() instead. This keeps the cipher suite invariant in one place and makes malformed wiphy descriptions fail early with -EINVAL, rather than relying on a single cfg80211 user to handle duplicates correctly. | ||||
| CVE-2026-97494 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter fails, and -EINVAL when the image size is zero or larger than the 1 MiB PSP private buffer. Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. | ||||
| CVE-2026-97493 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Bound GPIO I2C table entry count from VBIOS Reject undersized tables and cap the derived entry count to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[] or walk an absurd number of entries on corrupt size fields. | ||||
| CVE-2026-97425 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix buffer overflow during vBIOS update Clamp the buffer postion to write by setting the bin attribute to the maximum buffer size so that VFS layer will block the out-of-bounds accessing. | ||||
| CVE-2026-93790 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of the actual TID value 'tid'. This writes lq_color into a random tid_data slot unrelated to the BA entry. Since multi-TID blockack is not really in use, 'i' was always 0 and no harm was done. Add a out-of-bound check before accessing the array. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89761 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix out-of-bounds write when null terminating a label vec aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). | ||||
| CVE-2026-89702 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: size fh_verify server sockaddr slot by xpt_locallen The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the server sockaddr slot sized by xpt_remotelen but fill it from xpt_local using xpt_locallen: TP_STRUCT__entry( ... __sockaddr(server, rqstp->rq_xprt->xpt_remotelen) ... ) TP_fast_assign( ... __assign_sockaddr(server, &rqstp->rq_xprt->xpt_local, rqstp->rq_xprt->xpt_locallen); ... ) When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy writes past the reserved ring-buffer slot. In the reverse direction (xpt_locallen < xpt_remotelen) the slot is oversized and the unwritten tail leaks prior ring-buffer contents to trace consumers. The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote() is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from the RDMA connect path; svc_create_socket() for UDP calls only svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request then copies 16 or 28 bytes from xpt_local into a zero-byte slot. The other NFSD tracepoints that record the server address (NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS, SVC_RQST_ENDPOINT_FIELDS) already size the server slot by xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only exceptions. Fix by sizing the server slot with xpt_locallen so the declared slot matches the copy length. The client slot and its assignment already agree on xpt_remotelen and are left untouched. | ||||
| CVE-2026-89640 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). | ||||
| CVE-2026-89580 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and copying it into the caller's buffer, so the entry cannot be reused underneath us and trace->nr stays bounded by max_depth. Build ID resolution may fault and is therefore deferred until after preemption is re-enabled; by then the instruction pointers have already been copied into buf, so it operates only on that private copy. Note, preempt_disable() also subsumes the buffer-lifetime guarantee the rcu_read_lock() provided, since a preempt-disabled section is an RCU read-side critical section for the callchain buffers' call_rcu() reclaim. [ changed Fixes: commit ] | ||||
| CVE-2026-89530 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate. | ||||
| CVE-2026-80937 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||