Export limit exceeded: 10542 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10542 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90433 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq() and dereference already-freed memory (e.g. hw->base). Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90421 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90410 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: davinci: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_threaded_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded davinci_spi devdata, which is the IRQ handler's dev_id. The devm_request_threaded_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach davinci_spi_irq() and dereference already-freed memory. Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. The clock is acquired with devm_clk_get_enabled(), which is registered after the IRQ and thus released before it by the devres LIFO order. Drain the interrupt explicitly with devm_free_irq() before disabling the controller so that a late interrupt cannot access the registers of a clock-gated controller. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90392 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields. | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||
| CVE-2026-90343 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: stop PMSR before P2P and NAN teardown PMSR request teardown must abort active measurements while the wireless_dev is still present in the driver. cfg80211_leave_locked() and cfg80211_stop_pd() already do this before invoking the driver's stop callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not. Those helpers are also called directly by nl80211, rfkill shutdown, and wireless_dev unregister paths. If one of these paths stops a P2P device or NAN interface with a pending request, it removes the mac80211 subinterface from the driver first. Subsequent request cleanup cannot reach the lower driver's abort callback, but cfg80211 frees the request regardless. Driver state can then retain a stale request and use it when it later reports a result. Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN interface. This keeps lower-driver request state and cfg80211 request ownership in sync for all of the helpers' callers. | ||||
| CVE-2026-90337 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before linking the port and configuring it. Reserve space for the optional driver attribute group because config_port() may populate uport->attr_group during configuration. | ||||
| CVE-2026-90336 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure paths, as uart_unregister_driver() already does. | ||||
| CVE-2026-90308 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users. | ||||
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90229 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Destroy the admin queue on removal The admin queue is allocated with blk_mq_alloc_queue() but never destroyed. nvme_free_ctrl() only drops the last reference and blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never moved to q->unused_hctx_list and the timeout timer and work stay armed on a queue that is about to be freed which will eventually oops inside blk_mq_timeout_work(). This can only be triggered when the controller fails to come up and is then immediately torn down again which is why no one ever ran into this before. Let's just copy what the pcie driver does: unquiesce and destroy the admin queue before nvme_uninit_ctrl(). With this the following WARN followed by a panic no longer happens: WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119 CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT Hardware name: Apple Mac mini (M1, 2020) (DT) Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : blk_mq_release+0x194/0x238 lr : blk_mq_release+0x58/0x238 sp : ffffc000833a3b50 x29: ffffc000833a3b50 x28: ffff80001d0450f8 x27: ffff800020c95200 x26: 0000000000000088 x25: 0000000000000000 x24: ffff800020f36805 x23: 0000000000000000 x22: ffffc00081a86878 x21: ffff800020be9c60 x20: 0000000000000000 x19: ffff800022501698 x18: 000000000000000a x17: 7365757165722066 x16: 666f7265776f7020 x15: 0000000000000000 x14: 0000000000000028 x13: 0000000000004def x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000805b4fc8 x8 : ffffc00081915820 x7 : ffffc00081c4f3c8 x6 : 0000000000000001 x5 : 0000000000000004 x4 : ffff800022498d80 x3 : ffffc000833a3b14 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800022501698 Call trace: blk_mq_release+0x194/0x238 (P) blk_put_queue+0x8c/0xf0 nvme_free_ctrl+0x4c/0x260 device_release+0x44/0x128 kobject_put+0xa0/0x120 put_device+0x1c/0x40 nvme_uninit_ctrl+0x48/0x60 apple_nvme_remove+0x54/0xb0 platform_remove+0x28/0x40 device_remove+0x54/0x98 device_release_driver_internal+ device_release_driver+0x20/0x38 apple_nvme_remove_dead_ctrl_wor process_one_work+0x1f4/0x770 worker_thread+0x1b8/0x360 kthread+0x140/0x160 ret_from_fork+0x10/0x20 irq event stamp: 448 hardirqs last enabled at (447):in_unlock_irqrestore+0x74/0x80 hardirqs last disabled at (448): [<ffffc000811cf5c0>] el1_brk64+0x20/0x60 softirqs last enabled at (0): [ess+0xb28/0x2698 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 0000000000000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagA GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [0000000000000000] user address Internal error: Oops: 0000000096000005 [#1] SMP CPU: 7 UID: 0 PID: 54 Comm: kwor 7.2.0-rc1-dirty #248PREEMPT Tainted: [W]=WARN Hardware name: Apple Mac mini (M1, 2020) (DT) Workqueue: kblockd blk_mq_timeou pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : percpu_ref_tryget_many.cons lr : percpu_ref_tryget_many.constprop.0+0xc0/0x168 sp : ffffc000829cbce0 x29: ffffc000829cbce0 x28: ffff800020be9f48 x27: ffff800013e503c0 x26: 0000000000000108 x25: 000009c05 x23: 0000000000000000 x22: ffffc000819f5000 x21: ffff800020be9f48 x20: ffff8001deda4808 x19: ffff8000a x17: 00000000580e1fac x16: ffffc00082bbbb7c x15: 0000000000000000 x14: 0000000000000028 x13: 000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000829cbc20 x8 : ---truncated--- | ||||
| CVE-2026-90204 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the slot-local system inode cache. The dinode validator does not check this active slot, so an out-of-range value produces an invalid cache entry pointer that is dereferenced as an inode pointer. [FIX] Reject an active i_dio_orphaned_slot outside the slot range during dinode validation, before DIO orphan recovery can consume it. | ||||
| CVE-2026-90179 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present: 7.2-rc7 vanilla -> affected checked also some other kernels: 6.18.44 vanilla -> affected 6.12.95 with debian patches -> unaffected On systems without bug (for example 6.12.95 debian) it just prints: aa_change_hat rc=0 On systems with bug, the executable always hangs, prints nothing and becomes unkillable. (And once stuck this way, it will cause any further hat changes to also cause the changing process to get stuck) Then in syslog you can find hint about cause: kernel: INFO: task hat:3409 blocked for more than 483 seconds. kernel: Not tainted 7.2.0-rc7 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800 kernel: Call Trace: kernel: <TASK> kernel: __schedule+0x48f/0xfe0 kernel: schedule+0x27/0xa0 kernel: schedule_preempt_disabled+0x15/0x30 kernel: __mutex_lock.constprop.0+0x569/0xa10 kernel: aa_new_learning_profile+0x15f/0x210 kernel: build_change_hat+0x19f/0x3b0 kernel: change_hat.isra.0+0x5dd/0xd60 kernel: aa_change_hat+0x2f3/0x710 kernel: aa_setprocattr_changehat+0x121/0x1f0 kernel: do_setattr+0x28c/0x340 kernel: apparmor_setselfattr+0x20/0x50 kernel: security_setselfattr+0xf6/0x110 kernel: __x64_sys_lsm_set_self_attr+0x53/0x90 kernel: do_syscall_64+0xdd/0x5e0 kernel: ? __mod_memcg_lruvec_state+0xfd/0x260 kernel: ? lruvec_stat_mod_folio+0x8d/0xd0 kernel: ? __folio_mod_stat+0x2d/0x90 kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0 kernel: ? do_anonymous_page+0x184/0xa10 kernel: ? __handle_mm_fault+0x805/0x870 kernel: ? count_memcg_events+0xef/0x230 kernel: ? handle_mm_fault+0x1f0/0x2f0 kernel: ? do_user_addr_fault+0x2bb/0x7b0 kernel: ? do_syscall_64+0x94/0x5e0 kernel: ? exc_page_fault+0x75/0x160 kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e kernel: RIP: 0033:0x7f815e134c8d kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064 kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010 kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064 kernel: </TASK> kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409. To fix the issue, lift the locking out of the core of aa_new_learning_profile(), introduce a wrapper function that takes the lock where needed, and have build_change_hat() call the core function that no longer takes the lock. In addition fix 4 other issues introduced by commit 32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles") - aa_get_profile_rcu() was replaced-by: aa_get_profile without the accompanying rcu_dereference_protected() - an extra aa_get_label(label) was introduced at the start of change_hat() without an accompanying aa_put_label() causing a reference count leak. - a reference count leak was introduced in the label_is_stale(label) case, where the newest profile would be leaked instead of the label passed to the function. - a potential UAF when the lookup walks up the tree with new_ns != ns the new label refere ---truncated--- | ||||
| CVE-2026-90162 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window. | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||