Export limit exceeded: 36448 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36448 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-46325 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE The current implementation incorrectly handles memory regions (MRs) with page sizes different from the system PAGE_SIZE. The core issue is that rxe_set_page() is called with mr->page_size step increments, but the page_list stores individual struct page pointers, each representing PAGE_SIZE of memory. ib_sg_to_page() has ensured that when i>=1 either a) SG[i-1].dma_end and SG[i].dma_addr are contiguous or b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned. This leads to incorrect iova-to-va conversion in scenarios: 1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K): ibmr->iova = 0x181800 sg[0]: dma_addr=0x181800, len=0x800 sg[1]: dma_addr=0x173000, len=0x1000 Access iova = 0x181800 + 0x810 = 0x182010 Expected VA: 0x173010 (second SG, offset 0x10) Before fix: - index = (0x182010 >> 12) - (0x181800 >> 12) = 1 - page_offset = 0x182010 & 0xFFF = 0x10 - xarray[1] stores system page base 0x170000 - Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong) 2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K): ibmr->iova = 0x18f800 sg[0]: dma_addr=0x18f800, len=0x800 sg[1]: dma_addr=0x170000, len=0x1000 Access iova = 0x18f800 + 0x810 = 0x190010 Expected VA: 0x170010 (second SG, offset 0x10) Before fix: - index = (0x190010 >> 16) - (0x18f800 >> 16) = 1 - page_offset = 0x190010 & 0xFFFF = 0x10 - xarray[1] stores system page for dma_addr 0x170000 - Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong) Yi Zhang reported a kernel panic[1] years ago related to this defect. Solution: 1. Replace xarray with pre-allocated rxe_mr_page array for sequential indexing (all MR page indices are contiguous) 2. Each rxe_mr_page stores both struct page* and offset within the system page 3. Handle MR page_size != PAGE_SIZE relationships: - page_size > PAGE_SIZE: Split MR pages into multiple system pages - page_size <= PAGE_SIZE: Store offset within system page 4. Add boundary checks and compatibility validation This ensures correct iova-to-va conversion regardless of MR page size and system PAGE_SIZE relationship, while improving performance through array-based sequential access. Tests on 4K and 64K PAGE_SIZE hosts: - rdma-core/pytests $ ./build/bin/run_tests.py --dev eth0_rxe - blktest: $ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd [1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-46044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. | ||||
| CVE-2026-45932 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. | ||||
| CVE-2026-43485 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless. | ||||
| CVE-2026-43464 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-43294 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system | ||||
| CVE-2026-43199 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430 | ||||
| CVE-2026-43172 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix 22000 series SMEM parsing If the firmware were to report three LMACs (which doesn't exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is an overrun of the array. Reject such and use IWL_FW_CHECK instead of WARN_ON in this function. | ||||
| CVE-2026-31630 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example | ||||
| CVE-2026-23459 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which call iptunnel_xmit_stats(). iptunnel_xmit_stats() was assuming tunnels were only using NETDEV_PCPU_STAT_TSTATS. @syncp offset in pcpu_sw_netstats and pcpu_dstats is different. 32bit kernels would either have corruptions or freezes if the syncp sequence was overwritten. This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid a potential cache line miss since iptunnel_xmit_stats() needs to read it. | ||||
| CVE-2026-23143 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix misalignment bug in struct virtnet_info Use the new TRAILING_OVERLAP() helper to fix a misalignment bug along with the following warning: drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] This helper creates a union between a flexible-array member (FAM) and a set of members that would otherwise follow it (in this case `u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This overlays the trailing members (rss_hash_key_data) onto the FAM (hash_key_data) while keeping the FAM and the start of MEMBERS aligned. The static_assert() ensures this alignment remains. Notice that due to tail padding in flexible `struct virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data` (at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at offset 84 in struct virtnet_info) are misaligned by one byte. See below: struct virtio_net_rss_config_trailer { __le16 max_tx_vq; /* 0 2 */ __u8 hash_key_length; /* 2 1 */ __u8 hash_key_data[]; /* 3 0 */ /* size: 4, cachelines: 1, members: 3 */ /* padding: 1 */ /* last cacheline: 4 bytes */ }; struct virtnet_info { ... struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */ /* XXX last struct has 1 byte of padding */ u8 rss_hash_key_data[40]; /* 84 40 */ ... /* size: 832, cachelines: 13, members: 48 */ /* sum members: 801, holes: 8, sum holes: 31 */ /* paddings: 2, sum paddings: 5 */ }; After changes, those members are correctly aligned at offset 795: struct virtnet_info { ... union { struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */ struct { unsigned char __offset_to_hash_key_data[3]; /* 792 3 */ u8 rss_hash_key_data[40]; /* 795 40 */ }; /* 792 43 */ }; /* 792 44 */ ... /* size: 840, cachelines: 14, members: 47 */ /* sum members: 801, holes: 8, sum holes: 35 */ /* padding: 4 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 8 bytes */ }; As a result, the RSS key passed to the device is shifted by 1 byte: the last byte is cut off, and instead a (possibly uninitialized) byte is added at the beginning. As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also moved to the end, since it seems those three members should stick around together. :) | ||||
| CVE-2026-100074 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_refcount field as unique BPF_REFCOUNT is not marked as a unique field, while it should be. Fix this oversight. | ||||
| CVE-2025-71141 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tilcdc: Fix removal actions in case of failed probe The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers should only be called when the device has been successfully registered. Currently, these functions are called unconditionally in tilcdc_fini(), which causes warnings during probe deferral scenarios. [ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68 ... [ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108 [ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8 [ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144 [ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc] [ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc] Fix this by rewriting the failed probe cleanup path using the standard goto error handling pattern, which ensures that cleanup functions are only called on successfully initialized resources. Additionally, remove the now-unnecessary is_registered flag. | ||||
| CVE-2025-71072 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: shmem: fix recovery on rename failures maple_tree insertions can fail if we are seriously short on memory; simple_offset_rename() does not recover well if it runs into that. The same goes for simple_offset_rename_exchange(). Moreover, shmem_whiteout() expects that if it succeeds, the caller will progress to d_move(), i.e. that shmem_rename2() won't fail past the successful call of shmem_whiteout(). Not hard to fix, fortunately - mtree_store() can't fail if the index we are trying to store into is already present in the tree as a singleton. For simple_offset_rename_exchange() that's enough - we just need to be careful about the order of operations. For simple_offset_rename() solution is to preinsert the target into the tree for new_dir; the rest can be done without any potentially failing operations. That preinsertion has to be done in shmem_rename2() rather than in simple_offset_rename() itself - otherwise we'd need to deal with the possibility of failure after successful shmem_whiteout(). | ||||
| CVE-2025-39921 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback In commit 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem operation frequency switches") the logic for checking the viability of op->max_freq in mchp_coreqspi_setup_clock() was copied into mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid when this function is called during probe but is instead zero. Accordingly, baud_rate_val is calculated to be INT_MAX due to division by zero, causing probe of the attached memory device to fail. Seemingly spi-microchip-core-qspi was the only driver that had such a modification made to its supports_op callback when the per_op_freq capability was added, so just remove it to restore prior functionality. | ||||
| CVE-2025-39789 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: x86/aegis - Add missing error checks The skcipher_walk functions can allocate memory and can fail, so checking for errors is necessary. | ||||
| CVE-2025-39732 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask() ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: <TASK> dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.cold Change to ieee80211_iterate_stations_mtx() to fix this issue. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 | ||||
| CVE-2025-38264 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: sanitize request list handling Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of any list, otherwise a malicious R2T PDU might inject a loop in request list processing. | ||||