Export limit exceeded: 416327 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 95407 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (95407 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-89605 1 Linux 1 Linux Kernel 2026-09-14 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer.
CVE-2026-89604 1 Linux 1 Linux Kernel 2026-09-14 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivileged users on the efivarfs mount point, which may result in a flood of calls to the QueryVariableInfo() runtime service. These calls are disproportionately costly on x86 systems where the variable store is backed by SMM, as each SMM entry requires a rendez-vous of all the CPUs. So rate limit the calls to QueryVariableInfo() at twice per second, and return the most recently obtained value for calls that are elided.
CVE-2026-89597 1 Linux 1 Linux Kernel 2026-09-14 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code.
CVE-2026-89579 1 Linux 1 Linux Kernel 2026-09-14 7.8 High
In the Linux kernel, the following vulnerability has been resolved: bpf: Harden bloom filter sizing and indexing on 32-bit kernels bloom_map_alloc() has two 32-bit-specific problems when the computed bitmap reaches the U32_MAX fallback case. First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The addition performed by DIV_ROUND_UP wraps, so the map allocates only the fixed-size bloom filter object while keeping bitset_mask == U32_MAX. Subsequent updates can then write past the allocated object. Second, fixing only the allocation size is not sufficient. The bloom hash is a u32, but set_bit() takes a signed long bit number and x86 test_bit() eventually feeds the index to variable_test_bit(long, ...). On 32-bit kernels, hashes in [0x80000000, U32_MAX] therefore become negative bit offsets. x86 bt/bts with a memory operand interpret those offsets relative to the supplied base, so a map with bitset_mask == U32_MAX can read or write before bloom->bitset even after allocating the full 512 MiB bitmap. Keep the U32_MAX fallback, but split each hash into a word pointer and an in-word bit number before calling test_bit() or set_bit(). The bitops argument is then always in [0, BITS_PER_LONG - 1], while BIT_WORD(h) still selects the intended word in the full bitmap. Compute the bitset size from (u64)bitset_mask + 1 before passing the final size to bpf_map_area_alloc(). This fixes the original under-allocation and keeps the allocated storage consistent with the addressable bitset. Exploitation note: local privilege escalation is possible on a 32-bit x86 kernel using the under-allocation bug from a binary with CAP_BPF.
CVE-2026-89565 1 Linux 1 Linux Kernel 2026-09-14 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: ipip: fix skb leak in collect_md mode when metadata_dst allocation fails In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv() and tunnelmpls4_rcv() read the zero return as "the packet has been consumed" and do not free it either. The skb is leaked. The other tunnel drivers all dispose of the packet at this point: ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0. Jump to the existing drop label instead. It frees the skb and still returns 0, so the packet keeps being reported as consumed, which is what we want here: the outer header has already been pulled, and neither the remaining handlers nor an ICMP unreachable have any use for it. Triggering this needs an ipip or mplsip tunnel in collect_md mode and an atomic allocation failure, which is why it has gone unnoticed.
CVE-2026-89512 1 Linux 1 Linux Kernel 2026-09-14 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: remoteproc: scp: Fix device reference leak on failed lookup Make sure to drop the reference taken to the SCP device when attempting to look up its driver data before the driver has been bound. Note that holding a reference to a device does not prevent its driver data from going away.
CVE-2026-89498 1 Linux 1 Linux Kernel 2026-09-14 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: orangefs: fix double-free of trailer_buf on readdir copy failure On a readdir downcall, orangefs_devreq_write_iter() frees op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails, but does not clear the pointer before goto Efault. The waiter in do_readdir() is then woken with a negative status and frees the same pointer again on its r < 0 path, causing a deterministic double-free. A client holding /dev/pvfs2-req triggers it by sending a readdir downcall whose declared trailer_size exceeds the bytes it supplies. Clear the pointer after freeing so the readdir-side vfree() becomes a no-op.
CVE-2026-89496 1 Linux 1 Linux Kernel 2026-09-14 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: always run deallocs on copy-on-write completion Local fuzzing of 6.12.94 has found the following memory leak caused by doing 'copy_file_range()' within the same filesystem: unreferenced object 0xffff88812192c980 (size 32): comm "syz.0.49", pid 12095, jiffies 4294964143 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................ c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............ backtrace (crc 7068d63f): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] ocfs2_find_per_slot_free_list fs/ocfs2/alloc.c:6618 [inline] ocfs2_cache_block_dealloc+0x155/0x4b0 fs/ocfs2/alloc.c:6786 ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline] ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613 ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline] __ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985 ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237 ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825 ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138 ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098 ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline] ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline] ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349 ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline] ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470 ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline] ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451 iter_file_splice_write+0x890/0xf60 fs/splice.c:743 do_splice_from fs/splice.c:944 [inline] direct_splice_actor+0x232/0x480 fs/splice.c:1167 splice_direct_to_actor+0x4b4/0xb60 fs/splice.c:1111 do_splice_direct_actor fs/splice.c:1210 [inline] do_splice_direct+0x10f/0x1c0 fs/splice.c:1236 do_sendfile+0x430/0xbf0 fs/read_write.c:1388 unreferenced object 0xffff88812192c5c0 (size 32): comm "syz.0.49", pid 12095, jiffies 4294964143 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 29 70 00 00 00 00 00 00 19 00 00 00 00 00 00 00 )p.............. backtrace (crc afec850f): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] ocfs2_cache_block_dealloc+0x25c/0x4b0 fs/ocfs2/alloc.c:6793 ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline] ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613 ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline] __ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985 ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237 ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825 ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138 ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098 ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline] ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline] ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349 ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline] ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470 ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline] ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451 iter_file_splice_write+0x890/0xf60 fs/splice.c:743 do_splice_from fs/splice.c:9 ---truncated---
CVE-2026-89494 1 Linux 1 Linux Kernel 2026-09-14 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate lengths in dlm_mig_lockres_handler A node receiving a DLM_MIG_LOCKRES message trusts several fields of the peer-supplied dlm_migratable_lockres without validation. num_locks and lockname_len are bounded only on the sending side, and the message is never checked to actually carry num_locks migratable_lock entries. As a result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the kmalloc(data_len) copy of the message (an out-of-bounds read that ends in a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the fixed 32-byte o2dlm_lockname slab object (a heap out-of-bounds write). Both are reachable by any node in the domain. Validate these fields right after dlm_grab(), before anything uses them -- including the not-joined error path, which already prints mres->lockname with the unbounded lockname_len as a %.*s precision. Reject the message unless lockname_len <= DLM_LOCKID_NAME_MAX, num_locks <= DLM_MAX_MIGRATABLE_LOCKS (the bound the sender already asserts), and the payload is large enough to hold the claimed locks. Conforming recovery and migration messages are unaffected.
CVE-2026-89493 1 Linux 1 Linux Kernel 2026-09-14 8.8 High
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against that capacity, nor against each other, before any refcount/reflink/CoW operation walks the array. A crafted (or corrupted) refcount block with rl_used == 0xffff makes the loop above walk far past the end of the block, dereferencing rl_recs[i] for i up to 65534. The resulting index is then handed to the sibling ocfs2_insert_refcount_rec(), whose insert-shift does: if (index < le16_to_cpu(rf_list->rl_used)) memmove(&rf_list->rl_recs[index + 1], &rf_list->rl_recs[index], (le16_to_cpu(rf_list->rl_used) - index) * sizeof(struct ocfs2_refcount_rec)); i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an offset already past the block. This is reachable from an ordinary reflink (FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent whose cpos sorts past every real record in the leaf forces the lookup to run off the end instead of returning early on a match. The attacker model is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a raw write to the block device backing an already-mounted ocfs2 filesystem. ocfs2_validate_refcount_block() already validates the block's ECC, signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used against the block's actual on-disk capacity. This is the same class of gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes for the sibling extent-list header, which checks both the record capacity and the "used" bound before any code walks h_list.l_recs[]: if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) { rc = ocfs2_error(...); goto bail; } if (le16_to_cpu(eb->h_list.l_next_free_rec) > le16_to_cpu(eb->h_list.l_count)) { rc = ocfs2_error(...); goto bail; } Add the equivalent pair of checks to ocfs2_validate_refcount_block(): reject a refcount block whose rl_count does not match the fixed per-block capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used > rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set, because in that case the same union bytes hold an ocfs2_extent_list (rf_list), not the refcount record list (rf_records) -- that layout is already validated separately by ocfs2_validate_extent_block() when the referenced extent block is read. This mirrors the existing "!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or rf_list is the live member of the union. With this in place, a forged rl_used/rl_count is caught at block validation time (ocfs2_error()), consistent with every other corruption check in this function, instead of driving an out-of-bounds read in ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove() in ocfs2_insert_refcount_rec(). Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build: replaying the same reflink (FICLONE) reliably hit a KASAN report in __ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch, and triggers no report once ocfs2_validate_refcount_block() rejects the forged rl_used/rl_count.
CVE-2026-89473 1 Linux 1 Linux Kernel 2026-09-14 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix power_supply reference leak bq25890_fw_probe() acquires a reference to a secondary charger using power_supply_get_by_name(), but the reference is not released on later probe failures or on driver detach. In particular, failures after bq25890_fw_probe() returns successfully, such as a failure in bq25890_hw_init(), also leak the reference. Register a device-managed cleanup action immediately after acquiring the secondary charger. This releases the reference on all subsequent probe failures and on driver detach. Found by code review.
CVE-2026-89471 1 Linux 1 Linux Kernel 2026-09-14 8.4 High
In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd-charger: bound the EC-reported port count cros_usbpd_charger_probe() reads two port counts from the EC and uses one of them, num_charger_ports, as the loop bound when populating a fixed-size array: struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */ ... for (i = 0; i < charger->num_charger_ports; i++) charger->ports[charger->num_registered_psy++] = port; Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports (from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The only validation is a sanity check that compares the two EC-reported values against each other: if (num_charger_ports < num_usbpd_ports || num_charger_ports > num_usbpd_ports + 1) return -EPROTO; It never checks either count against EC_USB_PD_MAX_PORTS, the size of the ports[] array. A malfunctioning, malicious or compromised EC that reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for example both 255) passes this check, and the loop then writes N pointers into the 8-entry ports[] array embedded in the devm_kzalloc()'d charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976 bytes): a slab out-of-bounds write. Reject a port count larger than the ports[] array can hold.
CVE-2026-89470 1 Linux 1 Linux Kernel 2026-09-14 8.4 High
In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS Currently the cros_usbpd-charger driver probe iterates based on raw charger port count returned by the embedded controller. The only check is against the number of USB PD ports which the embedded controller also defines. A malicious embedded controller could return an inaccurate port count (up to 255) resulting in an out of bounds write and subsequent memory corruption. Update helper functions in cros_usbpd-charger to limit port counts to EC_USB_PD_MAX_PORTS.
CVE-2026-89438 1 Linux 1 Linux Kernel 2026-09-14 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate logical CPU id and clos id Validate max CLOS ID and logical CPU ID for core power feature. Reject any clos level or logical CPU number greater than the supported maximum. These are used to calculate MMIO offset.
CVE-2026-81017 1 Linux 1 Linux Kernel 2026-09-14 8.4 High
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Bound the EC-reported sensor number Each EC FIFO event carries an 8-bit sensor number (in->sensor_num). cros_ec_sensorhub_ring_handler() validates the FIFO event count, the per-read count and the ring bound, but not the sensor number, which cros_ec_sensor_ring_process_event() then uses unchecked to index sensorhub->batch_state[] - allocated with only sensorhub->sensor_num entries. A sensor number of sensor_num or larger is an out-of-bounds read and write of batch_state[]. Validate the sensor number in the ring handler, where each event is read from the EC, and drop a malformed event before it is used.
CVE-2026-80988 1 Linux 1 Linux Kernel 2026-09-14 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_transport: Fail TX enqueue when the QP link is down Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to make ntb_transport_tx_enqueue() drop packets submitted while the QP link is down, but it only returns 0 without consuming the packet. Zero means success by this function's contract, so ntb_netdev reports NETDEV_TX_OK and forgets the skb: nothing queued it, nothing frees it, and it leaks, one skb for every transmit racing a link-down. Return -ENOLINK instead, restoring the contract that a non-zero return leaves the buffer owned by the caller. With the preceding patch, ntb_netdev frees the skb on non-retryable enqueue failures and returns NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking or entering a busy retry loop.
CVE-2026-80968 1 Linux 1 Linux Kernel 2026-09-14 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: mts64: Check card index validity at probe Although mts64 driver has a check of the given devptr->id value, it doesn't check for a negative id, which is often given as "none" or such value when bound via sysfs. This may lead to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range.
CVE-2026-80951 1 Linux 1 Linux Kernel 2026-09-14 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: bound IBI payload to the requested max_payload_len svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into the IBI slot. The loop is bounded by the hardware FIFO size (SVC_I3C_FIFO_SIZE), not by the slot size. slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool() sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can request a smaller one. mctp-i3c requests 1. Each readsb() then copies the controller RXCOUNT bytes (up to 31) with no check against the slot size. A device that sends more bytes than the slot holds writes past slot->data, an out-of-bounds write into the IBI pool. Bound the loop by dev->ibi->max_payload_len and clamp each read to the space left in the slot, the same way dw-i3c does. A device can still send more than the requested payload. Flush the leftover bytes from the RX FIFO so they do not leak into the next transfer.
CVE-2026-80949 1 Linux 1 Linux Kernel 2026-09-14 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control() The memory allocated for buf is not freed in some of the error paths in brcmf_sdio_read_control(). Fix that by adding vfree() calls. [arend: rework as suggested by Johannes]
CVE-2026-80941 1 Linux 1 Linux Kernel 2026-09-14 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb() The skb passed to the rtw_hci_tx_write() is expected to be freed when the function fails, but the error path in rtw_txq_push_skb() does not free the skb before returning. This can lead to a memory leak in rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb().