Export limit exceeded: 36406 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36406 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23085 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest. | ||||
| CVE-2026-23011 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 | ||||
| CVE-2026-23083 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO. | ||||
| CVE-2026-23105 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag This is more of a preventive patch to make the code more consistent and to prevent possible exploits that employ child qlen manipulations on qfq. use cl_is_active instead of relying on the child qdisc's qlen to determine class activation. | ||||
| CVE-2026-23133 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. | ||||
| CVE-2026-23253 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock. | ||||
| CVE-2026-31508 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Avoid releasing netdev before teardown completes The patch cited in the Fixes tag below changed the teardown code for OVS ports to no longer unconditionally take the RTNL. After this change, the netdev_destroy() callback can proceed immediately to the call_rcu() invocation if the IFF_OVS_DATAPATH flag is already cleared on the netdev. The ovs_netdev_detach_dev() function clears the flag before completing the unregistration, and if it gets preempted after clearing the flag (as can happen on an -rt kernel), netdev_destroy() can complete and the device can be freed before the unregistration completes. This leads to a splat like: [ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI [ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT [ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025 [ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0 [ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90 [ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246 [ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000 [ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05 [ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000 [ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006 [ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000 [ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000 [ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0 [ 998.393944] PKRU: 55555554 [ 998.393946] Call Trace: [ 998.393949] <TASK> [ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch] [ 998.394009] ? __die_body.cold+0x8/0x12 [ 998.394016] ? die_addr+0x3c/0x60 [ 998.394027] ? exc_general_protection+0x16d/0x390 [ 998.394042] ? asm_exc_general_protection+0x26/0x30 [ 998.394058] ? dev_set_promiscuity+0x8d/0xa0 [ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch] [ 998.394092] dp_device_event+0x41/0x80 [openvswitch] [ 998.394102] notifier_call_chain+0x5a/0xd0 [ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60 [ 998.394110] rtnl_dellink+0x169/0x3e0 [ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0 [ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0 [ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0 [ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 998.394132] netlink_rcv_skb+0x50/0x100 [ 998.394138] netlink_unicast+0x292/0x3f0 [ 998.394141] netlink_sendmsg+0x21b/0x470 [ 998.394145] ____sys_sendmsg+0x39d/0x3d0 [ 998.394149] ___sys_sendmsg+0x9a/0xe0 [ 998.394156] __sys_sendmsg+0x7a/0xd0 [ 998.394160] do_syscall_64+0x7f/0x170 [ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 998.394165] RIP: 0033:0x7fad61bf4724 [ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 [ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724 [ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003 [ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f [ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2 ---truncated--- | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-100070 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details? | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63849 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) | ||||
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2023-45581 | 1 Fortinet | 2 Forticlient Enterprise Management Server, Forticlientems | 2026-10-22 | 7.9 High |
| An improper privilege management vulnerability [CWE-269] vulnerability in Fortinet FortiClientEMS 7.2.0 through 7.2.2, FortiClientEMS 7.0.6 through 7.0.10, FortiClientEMS 7.0.0 through 7.0.4, FortiClientEMS 6.4 all versions, FortiClientEMS 06.02 all versions, FortiClientEMS 6.2 all versions allows an Site administrator with Super Admin privileges to perform global administrative operations affecting other sites via crafted HTTP or HTTPS requests. | ||||
| CVE-2026-100071 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: free learned nodes on device setup failure hsr_dev_finalize() can fail after a lower-device RX handler has already been registered (slave A is added before the failable slave B and interlink adds). RX handlers run in softirq regardless of the master's state, so frames received in that window can learn dynamic nodes into node_db, and the error unwind never releases them. Free both owned dynamic databases in the unwind, mirroring hsr_dellink(). proxy_node_db is provably empty on every current error exit (only interlink RX feeds it, and the interlink add is the last failable step) and is freed for symmetry. The order is safe: hsr_del_port() unregisters each RX handler with synchronize_net() before hsr_del_nodes() runs, which removes remaining entries with list_del_rcu() and defers their release with call_rcu() for readers already under RCU. | ||||
| CVE-2026-46181 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized. | ||||
| CVE-2025-38372 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling __xa_store() and __xa_erase() were used without holding the proper lock, which led to a lockdep warning due to unsafe RCU usage. This patch replaces them with xa_store() and xa_erase(), which perform the necessary locking internally. ============================= WARNING: suspicious RCPU usage 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted ----------------------------- ./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/u136:0/219: at: process_one_work+0xbe4/0x15f0 process_one_work+0x75c/0x15f0 pagefault_mr+0x9a5/0x1390 [mlx5_ib] stack backtrace: CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] Call Trace: dump_stack_lvl+0xa8/0xc0 lockdep_rcu_suspicious+0x1e6/0x260 xas_create+0xb8a/0xee0 xas_store+0x73/0x14c0 __xa_store+0x13c/0x220 ? xa_store_range+0x390/0x390 ? spin_bug+0x1d0/0x1d0 pagefault_mr+0xcb5/0x1390 [mlx5_ib] ? _raw_spin_unlock+0x1f/0x30 mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib] process_one_work+0x7db/0x15f0 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x57d/0xcd0 ? rescuer_thread+0xc40/0xc40 kthread+0x3b3/0x800 ? kthread_is_per_cpu+0xb0/0xb0 ? lock_downgrade+0x680/0x680 ? do_raw_spin_lock+0x12d/0x270 ? spin_bug+0x1d0/0x1d0 ? finish_task_switch.isra.0+0x284/0x9e0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork+0x2d/0x70 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork_asm+0x11/0x20 | ||||
| CVE-2025-38303 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix possible crashes on eir_create_adv_data eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER without checking if that would fit. | ||||
| CVE-2025-38064 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio: break and reset virtio devices on device_shutdown() Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory accesses during the hang. Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected ... It was traced down to virtio-console. Kexec works fine if virtio-console is not in use. The issue is that virtio-console continues to write to the MMIO even after underlying virtio-pci device is reset. Additionally, Eric noticed that IOMMUs are reset before devices, if devices are not reset on shutdown they continue to poke at guest memory and get errors from the IOMMU. Some devices get wedged then. The problem can be solved by breaking all virtio devices on virtio bus shutdown, then resetting them. | ||||