Export limit exceeded: 47506 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47506 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-86760 | 2 Grokability, Snipeitapp | 2 Snipe-it, Snipe-it | 2026-09-14 | 5.4 Medium |
| Snipe-IT versions 8.2.0 through 8.6.x (fixed in 8.7.0) contain an incorrect authorization flaw in app/Http/Controllers/Users/UsersController::update(). The single-user edit route assigned the activated field from the request payload before evaluating the canEditAuthFields authorization gate, so an authenticated non-admin user holding the users.edit permission in the target's company scope can submit a full valid PUT request to /users/{id} and toggle the activated flag on any user, including admin and superuser accounts. Deactivating an admin locks that account out of the application until another admin or superuser re-enables it. Only the activated field is affected; username, email, password and permissions remain protected by the gate, no data is disclosed, and the API (Api\UsersController::update) and bulk-edit paths are not affected. | ||||
| CVE-2026-86755 | 2 Grokability, Snipeitapp | 2 Snipe-it, Snipe-it | 2026-09-14 | 5.4 Medium |
| Snipe-IT versions 4.2.0 through 8.6.3 expose Laravel Passport's auto-registered personal-access-token routes (GET, POST, DELETE /oauth/personal-access-tokens*) with only 'web' and 'auth:web' middleware, without the self.api permission gate that Snipe-IT enforces on its own token endpoints (/account/api and /api/v1/account/personal-access-tokens). Any user with a valid web session and the corresponding CSRF token can POST to /oauth/personal-access-tokens and mint a long-lived bearer token for their own account, even when an administrator has denied the self.api permission. The issued token is still subject to existing per-endpoint authorization policies, so this is not a privilege escalation; it defeats the administrative control intended to block API/scripted access at the user's own permission level. Fixed in 8.7.0 (commit 3f74b8c), which registers overriding routes wrapped in the can:self.api middleware. | ||||
| CVE-2026-86750 | 1 Snipeitapp | 1 Snipe-it | 2026-09-14 | 7.7 High |
| Snipe-IT versions <= 8.6.3 (fixed in 8.7.0) do not validate company assignment authorization before persisting user records via the REST API. In Api\UsersController::store() and ::update(), the user record is filled from the request and saved before the requested company_id / company_ids[] values are filtered against the actor's permitted companies (Company::getIdsForCurrentUser()). On installs using Full Multiple Companies Support (FMCS), a non-superuser holding users.create (or users.edit on a target user) can submit company identifiers for companies outside their scope — including a mix of permitted and foreign ids — causing the account row to be committed to the database before authorization is checked. Where null_company_is_floater=1 is set, the post-hoc filter leaves an empty company pivot and the account is persisted as a "floater" with cross-company visibility, allowing creation or relocation of user accounts across tenant boundaries. | ||||
| CVE-2026-86142 | 1 Xmlsoft | 1 Libxml2 | 2026-09-14 | 6.9 Medium |
| In libxml2 before 2.15.4, there is a heap-based buffer overflow in xmlXPtrEvalXPtrPart because of xmlXPtrEval xpointer length saturation. | ||||
| CVE-2026-85578 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-09-14 | 6.5 Medium |
| SiYuan through 3.8.1 contains an authorization bypass vulnerability in the /api/file/getFile endpoint that allows readers to retrieve files from notebooks explicitly configured as Visible:false. Attackers with reader role can access private workspace files including notebook metadata and internal configuration by knowing the hidden notebook identifier and file path. | ||||
| CVE-2026-82525 | 1 Exterro | 1 Ftk Imager | 2026-09-14 | 5.5 Medium |
| Exterro FTK Imager before 8.3 contains an XML external entity (XXE) injection vulnerability that allows attackers to read arbitrary files from the host filesystem by embedding malicious external entity references and attacker-controlled XSLT stylesheets within a Report.xml file inside a UFDR ZIP evidence item. Attackers can craft a malicious UFDR archive that, when previewed by an examiner, causes the XML parser to resolve file:// external entity references and execute msxsl:script within the external stylesheet to exfiltrate the resolved file contents to an attacker-controlled endpoint via a generated image URL. | ||||
| CVE-2026-79946 | 1 Dell | 1 Secure Connect Gateway | 2026-09-14 | 5.3 Medium |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Alternate XSS Syntax vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. | ||||
| CVE-2026-88802 | 2026-09-14 | 7.5 High | ||
| The MDJM Event Management WordPress plugin before 1.7.8.5 and the Mobile Events Manager WordPress plugin through 1.4.8.3 do not check a capability, a nonce or the type of the record before permanently deleting the post identified in a request to their playlist entry removal, allowing unauthenticated attackers to destroy arbitrary posts, pages and media attachments, bypassing the trash. | ||||
| CVE-2026-87575 | 1 Google | 1 Chrome | 2026-09-14 | 5.4 Medium |
| Incorrect authorization in Loader in Google Chrome prior to 153.0.8010.36 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-86077 | 1 N8n | 1 N8n | 2026-09-14 | 6.5 Medium |
| n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the /chat WebSocket route accepted a resumeToken and resumed a paused execution without checking that the target node supported chat messages. An anonymous form submitter who received that token could reuse it on the chat route to release a Send-and-Wait, non-chat HITL, or Wait approval gate. The affected authorization logic is packages/cli/src/chat/chat-execution-manager.ts, where canResumeOverChat did not gate the resume target. This issue is fixed in versions 2.37.7 and 2.38.2. | ||||
| CVE-2026-74933 | 2026-09-14 | 8.8 High | ||
| The GenieWords WordPress plugin from 1.5.27 to 1.5.34 does not have authorisation checks on some of its REST API and AJAX actions, and decodes stored values before printing them, allowing unauthenticated users to overwrite its configuration and inject arbitrary web scripts that execute on every front-end page. | ||||
| CVE-2026-53638 | 1 Sylius | 1 Sylius | 2026-09-14 | 4.3 Medium |
| Sylius is an Open Source eCommerce Framework on Symfony. Starting in version 2.0.0 and prior to version 2.0.18, 2.1.15, and 2.2.6, an authorization bypass vulnerability exists in the shop account API. The `PATCH /api/v2/shop/account/orders/{tokenValue}/payments/{paymentId}` endpoint, used by an authenticated shop customer to change the payment method of an order that has been placed but not yet paid (state `STATE_NEW`), does not validate that the chosen payment method is enabled for the order's channel. The equivalent checkout endpoint (`PATCH /api/v2/shop/orders/{tokenValue}/payments/{paymentId}`) correctly rejects out-of-channel payment methods with `HTTP 422`; the account endpoint silently accepts them and returns `HTTP 200`. An authenticated customer can therefore assign any globally enabled payment method to their own placed order, including methods that the store operator has explicitly excluded from that channel. The issue is fixed in versions: 2.0.18, 2.1.15, 2.2.6 and above. As a workaround, decorate the `Sylius\Bundle\ApiBundle\Changer\PaymentMethodChangerInterface` service in the application. | ||||
| CVE-2026-20773 | 1 Ping Identity | 1 Pingfederate | 2026-09-14 | N/A |
| A role-based access control issue was identified in the administrative expression evaluation functionality. This could allow users with certain administrative roles to access expression testing capabilities beyond their intended permissions. | ||||
| CVE-2026-89756 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent state, and the migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the Tasks-RCU grace period for minutes, which is common at Meta fleet: INFO: rcu_tasks detected stalls on tasks: 0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task Call Trace: tdp_mmu_zap_leafs tdp_mmu_next_root gfn_to_pfn_cache_invalidate_start kvm_mmu_notifier_invalidate_range_start __mmu_notifier_invalidate_range_start try_to_migrate_one try_to_migrate migrate_pages_batch migrate_pages compact_zone compact_node kcompactd kthread Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even when cond_resched() does nothing. This has also been discussed at [1] | ||||
| CVE-2026-89753 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded time, and the scan loop in shrink_lruvec() only calls cond_resched(), which is a no-op on PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent state, so the reclaiming task never reports one and becomes a holdout. Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state even when cond_resched() does nothing. PS: This has been discussed in [1] | ||||
| CVE-2026-89750 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44 Call Trace: <TASK> kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 current_user_event_mm+0x51/0x1d0 user_events_ioctl+0x82e/0x15c0 __x64_sys_ioctl+0x139/0x1c0 do_syscall_64+0xce/0x450 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 44: __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x180/0x3a0 user_event_mm_alloc+0x3c/0x1f0 current_user_event_mm+0x88/0x1d0 Freed by task 42: __kasan_slab_free+0x43/0x70 kfree+0x13a/0x390 process_one_work+0x696/0xf90 worker_thread+0x420/0xba0 The fix simply clears the copied pointer before any possible failure. In case of failure, the child then has nothing to free. | ||||
| CVE-2026-89746 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger The third write panics the kernel: BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290 Read of size 8 at addr ffff888001f8a0e0 by task sh/1 CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N Call Trace: find_var_file.part.0 find_event_var parse_atom parse_expr __create_val_field event_hist_trigger_parse trigger_process_regex event_trigger_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Allocated by task 1: event_hist_trigger_parse Freed by task 1: hist_register_trigger+0x618/0xa30 event_hist_trigger_parse The buggy address belongs to freed 2048-byte region Oops: general protection fault ... RIP: find_var_file.part.0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix by removing the hist_data from tr->hist_vars and releasing the trace_array reference in the named-data branch of hist_register_trigger() before freeing the hist_data. | ||||
| CVE-2026-89742 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO mport character device interface. | ||||
| CVE-2026-89736 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free (UAF) memory corruption. Fix this issue by deferring the destruction of struct snd_uac_chip until all references to the ALSA sound card are released. Register a custom card->private_free callback (u_audio_card_free) during g_audio_setup() that frees uac and its associated playback/capture request and ring buffers only when the sound card reference count drops to zero. | ||||
| CVE-2026-89733 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() In uvc_function_bind() error path, we use usb_ep_free_request which uses uvc->control_req but does not set it to NULL afterwards. Thus, uvc->control_req is a dangling pointer causing a UAF. Also we do not set the uvc->control_buf pointer to NULL after freeing it, which is another dangling pointer. Fix it by setting uvc->control_req to NULL after we run usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the same for uvc_function_unbind(). | ||||