Export limit exceeded: 109247 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (109247 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-72316 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. | ||||
| CVE-2026-72219 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file leak when nlm_do_fopen() fails A client can repeatedly drive nlm_do_fopen() failures by presenting file handles that the underlying export rejects. After kzalloc_obj() succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps to out_unlock, which releases nlm_file_mutex and returns without freeing the allocation, so each failure leaks one nlm_file. Route the failure through out_free so kfree() runs before the function returns. | ||||
| CVE-2026-72218 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | ||||
| CVE-2026-68480 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Make Safe-RET robust against interrupt injection An attacker injecting interrupts while the Safe-RET mitigation executes on machines affected by SRSO can neutralize the safe return sequence, potentially leading to data leakage through speculative execution. Fixup register state as if the Safe-RET sequence executed successfully by "emulating" it, in a manner of speaking, and avoid executing a RET instruction after returning from the interrupt. | ||||
| CVE-2026-68169 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0 ... [ 666.319401] Call Trace: [ 666.319405] <IRQ> [ 666.319408] dump_stack_lvl+0x53/0x70 [ 666.319412] print_address_description.constprop.0+0x2c/0x3b0 [ 666.319418] print_report+0xbe/0x2b0 [ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319423] kasan_report+0xce/0x100 [ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319433] mptcp_pm_get_local_id+0x371/0x440 ... [ 666.319821] Allocated by task 45539: [ 666.319844] kasan_save_stack+0x33/0x60 [ 666.319855] kasan_save_track+0x14/0x30 [ 666.319858] __kasan_kmalloc+0x8f/0xa0 [ 666.319863] __kmalloc_noprof+0x1e7/0x520 [ 666.319867] sock_kmalloc+0xdf/0x130 [ 666.319885] sock_kmemdup+0x1b/0x40 [ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500 [ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610 ... [ 666.319967] Freed by task 45560: [ 666.319988] kasan_save_stack+0x33/0x60 [ 666.319991] kasan_save_track+0x14/0x30 [ 666.319994] kasan_save_free_info+0x3b/0x60 [ 666.319998] __kasan_slab_free+0x43/0x70 [ 666.320000] kfree+0x166/0x440 [ 666.320003] sock_kfree_s+0x1d/0x50 [ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200 [ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0 Fix by copying the id into a local variable while still holding the lock, and use -1 as a "not found" sentinel. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-68086 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied. However, there is an edge-case: collapse_file() might not be able to coexist with concurrent writers, but it can coexist with dirty folios (from previous writers). Therefore, the following can happen: open(file, O_RDWR) write(file) close(file) madvise(file_mapping, MADV_COLLAPSE, some non-dirty range) open(file, O_RDWR) nr_thps > 0 truncate_inode_pages() /* THPs are cleared out, but so are the dirty folios */ When this edge-case happens, there is data loss, as the dirty folios are fully discarded. Fix it by fully writing back the page cache (and waiting) when collapsing file THPs. Doing so provides the guarantee that no dirty folio will be observed while there are active THPs. To fully ensure this is safe, the invalidate_lock needs to be held while doing the writeout, so that do_dentry_open()'s page cache truncation excludes this write-and-wait. As a side effect, move the nr_thps counter bumping outside the i_pages lock. This is correct since the counter itself is an atomic_t and the producer <-> consumer correctness is provided by a full memory barrier: smp_mb() in collapse_file()/memory barrier implied by full ordering in get_write_access() -> atomic_inc_unless_negative(). | ||||
| CVE-2026-65874 | 1 Apache | 1 Fineract | 2026-11-06 | 8.8 High |
| This issue affects Apache Fineract versions up to and including 1.15.0. The Center read endpoint (GET /api/v1/centers) and the datatable entry read endpoints (GET /api/v1/datatables/{datatable}/{apptableId} and GET /api/v1/datatables/{datatable}/{apptableId}/{datatableId}) concatenate caller-supplied ordering parameters (orderBy, sortOrder, order) directly into the SQL ORDER BY clause. The existing regex-based input validation can be bypassed, allowing time-based blind SQL injection by any authenticated user with read access to centers or to the targeted datatable. Users are recommended to upgrade to 1.16.1 which fixes the issue. | ||||
| CVE-2026-64572 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: free fib_alias with kfree_rcu() on insert error path fib_table_insert() publishes new_fa into the leaf's fa_list with fib_insert_alias() before calling the fib entry notifiers. When a notifier fails, the error path removes new_fa with fib_remove_alias() (hlist_del_rcu) and frees it right away with kmem_cache_free(). fib_table_lookup() walks that list under rcu_read_lock() only, so a concurrent lookup that already reached new_fa keeps reading it after the free: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56 Triggering the error path needs CAP_NET_ADMIN and a registered fib notifier that can reject a route; a netdevsim device whose IPv4 FIB resource is exhausted is enough. Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already does for a fib_alias removed from the trie. | ||||
| CVE-2026-64538 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 | ||||
| CVE-2026-64508 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Support for hardening against JIT spraying The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64471 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on registration failure Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||
| CVE-2026-64470 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64433 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated--- | ||||
| CVE-2026-64424 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material. | ||||