Export limit exceeded: 410694 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410694 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98715 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid(). Deliberately don't bother saving/restoring the "old" tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the ASID on emulated INIT, means that a guest can already trigger a flush of all ASIDs at roughly the same rate. And once KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID to each vCPU, this flaw goes away. | ||||
| CVE-2026-98714 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails, because as per AMD: there's no explicit architectural guarantee about the behavior in the presence of VMRUN failures. So the best thing to do would be to assume that if VMRUN fails, the actions requested in the control fields may not have been performed. | ||||
| CVE-2026-98692 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Make the DP tunnel activation callback mandatory tb_tunnel_alloc_dp() takes an optional callback which is run from dprx_work once the DPRX capabilities read has completed. Without that callback tb_dp_dprx_start() reads the capabilities synchronously and never queues the work. It however always takes a tunnel reference which is only dropped by dprx_work itself or by tb_dp_dprx_stop() when cancel_delayed_work() actually canceled that work. That reference is thus leaked for every tunnel without a callback. The only tunnels without one are those from tb_tunnel_discover_dp(), which are activated again when restoring from hibernation. Pass the callback to tb_tunnel_discover_dp() as well and drop the synchronous path such that the DPRX capabilities are always read from dprx_work. Hibernation restore then also no longer blocks for up to 12 seconds while waiting for that read to complete. Also fix up the KUnit tests. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98682 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: drain and invalidate before server-side copy/clone cifs_file_copychunk_range() and the clone (FICLONE) path of cifs_remap_file_range() do not serialise the destination page cache against the server-side copy the way the other server-side range operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range() and smb3_insert_range()) do. cifs_file_copychunk_range() invalidates the destination range with filemap_invalidate_inode(), which takes and drops the mapping's invalidate_lock internally, so the lock is no longer held when the copychunk ioctl is issued. It also never drains in-flight netfs I/O on the target. The clone path never takes the invalidate_lock at all (only i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not drain outstanding I/O. As a result an asynchronous destination writeback can complete after the server-side copy/clone has run and reinstate stale data over the region just written by the server, corrupting the file. This is the same class of corruption as commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole") and has been seen randomly in generic/363 against Windows Server. Fix both paths to follow the established ordering: hold the target mapping's invalidate_lock across the flush and invalidation of the destination and the server ioctl, and call netfs_wait_for_outstanding_io() on the target to drain in-flight writes before the ioctl is issued. Only the target inode's invalidate_lock is required, as the source is merely flushed and not invalidated; i_rwsem (already held via lock_two_nondirectories()) is acquired before the invalidate_lock, matching the VFS lock ordering. Since filemap_invalidate_inode() takes that same lock internally, replace it with its own unmap/flush/invalidate steps instead of calling it, and return early on a zero-length copy to avoid a range underflow. | ||||
| CVE-2026-98449 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again. | ||||
| CVE-2026-98439 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish. | ||||
| CVE-2026-98228 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000 [ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9 [ 34.133726] $24 : 0000000000000006 00000001200406e0 [ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4 [ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428 [ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428 [ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE [ 34.166551] Cause : 40800408 (ExcCode 02) [ 34.170574] BadVA : 0000000000000000 [ 34.174161] PrId : 0001b028 (MIPS I6500) [ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780) [ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0 [ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80 [ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500 [ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001 [ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff [ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000 [ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000 [ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000 [ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500 [ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000 [ 34.269103] ... [ 34.271568] Call Trace: [ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428 [ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318 [ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138 [ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68 [ 34.295187] [ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3 [ 34.306504] [ 34.308099] ---[ end trace 0000000000000000 ]--- My initial reproducer was the xdp-tools test suite. A standalone reproducer would be an lld/scd loop that, when the read is reordered by the CPU, triggers a fault. We can achieve this from userspace by stressing an anonymous pipe, which uses a mutex. Program used: // SPDX-License-Identifier: GPL-2.0 // pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c // // Two userspace processes on an anonymous pipe: // parent = writer: tight write() loop // child = reader: tight read() loop #define _GNU_SOURCE #include <assert.h> #include <errno.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include ---truncated--- | ||||
| CVE-2026-98177 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) | ||||
| CVE-2026-98176 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) | ||||
| CVE-2026-97538 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses response headers and payload fields without first checking that they are present in the received report. A short report can therefore make the driver consume uninitialized bytes from the HID transport buffer and expose them as sensor values through sysfs. Validate the response header and the fields used by each response type before parsing them. | ||||
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-80668 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. | ||||
| CVE-2026-112208 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-06 | 8.1 High |
| A flaw was found in the Organization identity-first login flow of the Keycloak authentication server. Keycloak is an open-source identity and access management solution used to secure modern applications and services. The issue occurs when an attacker who belongs to multiple organizations initiates a login and then switches to a registration or password reset path. During this process, a flag indicating a successful login is not properly cleared when the user is removed from the session. An attacker can then provide a victim's username, and the system incorrectly treats the stale flag as proof of the victim's identity. This allows the attacker to bypass authentication and gain full access to the victim's account and connected applications. | ||||
| CVE-2026-110931 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-06 | 7.5 High |
| A flaw was found in the SAML 1.1 assertion parser of Keycloak, a tool used for identity and access management. The issue occurs when the parser handles a specific element called AuthorityBinding within an authentication statement. Due to an incomplete fix for a previous vulnerability, the parser can enter an infinite loop that consumes all available memory, causing the entire Keycloak service to crash and become unavailable to users. | ||||
| CVE-2026-107602 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-06 | 7.5 High |
| A flaw was found in the SAML 1.1 XML parsing logic of Keycloak, an open-source identity and access management solution. The issue occurs when the parser encounters unexpected elements within a security token's key information section, causing the processing thread to enter an infinite loop. An unauthenticated remote attacker could exploit this by sending specially crafted requests, leading to 100% CPU usage and a total denial of service that requires a server restart to resolve. | ||||
| CVE-2026-103112 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-06 | 7.5 High |
| A flaw was found in the authentication session handling of the keycloak-services component in Keycloak. The issue occurs because the system fails to verify if an authenticator is valid for the current authentication flow when switching between the standard authentication path and the reset credentials path. An authenticated attacker can exploit this by triggering a race condition during the credential reset process to associate their successful authentication state with another user's session. This can result in the attacker gaining full access to the victim's account and changing their password. | ||||
| CVE-2026-97847 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-11-06 | 7.1 High |
| A flaw was found in the protocol mapper and identity resolution components of Keycloak. The issue occurs when a client manager uses hardcoded-claim mappers to override identity claims in sessionless service-account tokens. Because these tokens lack a session ID, Keycloak may incorrectly resolve the token bearer as a different, highly privileged user based on the manipulated claims. This can allow an attacker with limited client management permissions to impersonate a realm administrator and gain full control over the realm. | ||||
| CVE-2026-96453 | 1 Redhat | 7 Amq Broker, Build Keycloak, Jboss Enterprise Application Platform and 4 more | 2026-11-06 | 8 High |
| A flaw was found in the Keycloak Admin CLI kcadm tool, which is used by administrators to manage Keycloak servers from the command line. When a custom truststore is provided to verify the server identity, the tool incorrectly accepts any self-signed certificate as long as the hostname matches. This allows a network attacker to impersonate the Keycloak server, steal administrative credentials, and perform unauthorized management actions. | ||||
| CVE-2026-93569 | 2 Io.netty, Redhat | 23 Netty-codec-http, Amq Broker, Apache Camel Quarkus and 20 more | 2026-11-06 | 8.2 High |
| A flaw was found in Netty. A remote unauthenticated attacker can exploit a vulnerability in Netty's HTTP/1 to HTTP/2 conversion process. When an HTTP/1 request includes both an absolute-form request-target and a conflicting Host header, Netty incorrectly prioritizes the Host header for the HTTP/2 :authority field, discarding the original request-target authority. This inconsistency can allow an attacker to bypass security controls in Netty-based proxies or gateways, potentially leading to unauthorized access, cache poisoning, or misrouting of requests. | ||||