Export limit exceeded: 30276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 95171 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (95171 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72302 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | ||||
| CVE-2026-72301 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get In sof_ipc3_bytes_put(), the size used for the memcpy is derived from the old data->size already in the buffer, not the incoming new data's size field. If the new data has a different size, the copy length is wrong: it may truncate valid data or copy stale bytes. Similarly, sof_ipc3_bytes_get() checks data->size against max_size without accounting for the sizeof(struct sof_ipc_ctrl_data) offset of the flex array within the allocation. Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata) from the bounds check to match the actual available space. | ||||
| CVE-2026-72298 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | ||||
| CVE-2026-72262 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get The ipc_control_data buffer is allocated as kzalloc(max_size), where max_size covers the entire struct sof_ipc_ctrl_data including its flexible array payload. However, the bounds checks in bytes_ext_put and _bytes_ext_get compared user data lengths against max_size directly, ignoring that cdata->data sits at an offset of sizeof(struct sof_ipc_ctrl_data) bytes into the allocation. This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past the end of the heap buffer from unprivileged userspace via the ALSA TLV kcontrol interface, and similarly allowed over-reading adjacent heap data on the get path. Fix all bounds checks to subtract sizeof(*cdata) from max_size so they reflect the actual space available at the cdata->data offset. Also fix the error-path restore in bytes_ext_put which wrote to cdata->data instead of cdata, causing the same overflow. | ||||
| CVE-2026-72252 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away. | ||||
| CVE-2026-72231 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. | ||||
| CVE-2026-72226 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements. | ||||
| CVE-2026-72197 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound DeleteIndexEntryAllocation memmove length In do_action()'s DeleteIndexEntryAllocation case, e->size comes from an on-disk INDEX_BUFFER entry. When e->size makes e + e->size point past hdr + hdr->used, PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t that is silently cast to a quasi-infinite size_t when passed to memmove(). The memmove then walks past the destination buffer. The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543 already carries the corresponding guard: if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize || Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) || used + esize > le32_to_cpu(hdr->total)) { goto dirty_vol; } Apply the same shape to the allocation-path case. Also reject esize == 0: memmove(e, e, ...) is a no-op and leaves hdr->used unchanged, hiding a malformed entry from the existing check_index_header() walk. Reproduced under UML+KASAN on mainline 8d90b09e6741 by mounting a crafted NTFS image: the unguarded memmove takes a length of 0xffffffffffffff00 and the kernel oopses in memmove+0x81/0x1a0 on the do_action+0x36a2 frame. [almaz.alexandrovich@paragon-software.com: clang-formatted the changes] | ||||
| CVE-2026-72196 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass In log_replay()'s analysis pass, after find_dp() returns a valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple, the copy_lcns block walks lrh->lcns_follow further entries: t16 = le16_to_cpu(lrh->lcns_follow); for (i = 0; i < t16; i++) { size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) - le64_to_cpu(dp->vcn)); dp->page_lcns[j + i] = lrh->page_lcns[i]; } find_dp() only validates that target_vcn falls within [dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST cluster is covered. The walk through the further entries is not bounded against dp->lcns_follow. For a malformed LRH where target_vcn = dp->vcn + dp->lcns_follow - 1 and lrh->lcns_follow > 1, the i > 0 writes overflow the dp's allocated page_lcns[] array. Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard. Reproduced under UML+KASAN on mainline 8d90b09e6741 as a slab-out-of-bounds write of size 8 from log_replay+0x68d4 on the mount path. This is distinct from Pavitra Jha's 2026-05-02 patch ("fs/ntfs3: validate lcns_follow in log_replay conversion", <20260502154252.164586-1-jhapavitra98@gmail.com>) which addresses the separate version-0 dirty-page-table conversion path's memmove(&dp->vcn, ...) call. The two fixes are complementary; both should land. [almaz.alexandrovich@paragon-software.com: clang-formatted the changes, fixed conflicts] | ||||
| CVE-2026-72191 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() computes used = used1 - to_copy - sp_size; memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off)); where sp and sp_size come from hdr_find_split(). hdr_find_split() walks entries by le16_to_cpu(e->size) without validating that each step stays within hdr->used or that the size field is at least sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper, only validates header-level fields (used, total, de_off) and does not walk per-entry sizes. A crafted NTFS image whose leaf INDEX_HDR reports used == total but contains one interior NTFS_DE with size = 0xFFF0 therefore passes validation, descends to indx_insert_into_buffer() through the ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split() return an sp whose sp_size (0xFFF0) greatly exceeds the remaining bytes in the buffer. The u32 subtraction underflows and the memmove count becomes a near-4-GiB value, producing an out-of-bounds kernel write that corrupts adjacent allocations and panics the kernel. Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a single 'touch' inside the mounted directory; crash site resolves to fs/ntfs3/index.c at the memmove. Trigger requires only local mount of an attacker-supplied filesystem image (USB, loopback, or removable media auto-mount). Reject the split whenever the chosen sp plus its declared size already extends past hdr1->used. This is the minimal fix; it preserves the existing hdr_find_split() contract and relies on the same out: cleanup path as the pre-existing error returns. A prior OOB read in the very same indx_insert_into_buffer() memmove was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in indx_insert_into_buffer") by tightening hdr_find_e(), but that fix does not cover the split-point size field path addressed here: sp is returned by hdr_find_split(), not hdr_find_e(), and the underflow is driven by sp->size rather than hdr->used exceeding hdr->total. | ||||
| CVE-2026-72157 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72018 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | ||||
| CVE-2026-111374 | 1 Freerdp | 1 Freerdp | 2026-10-16 | 5.3 Medium |
| FreeRDP from 3.30.0 before 3.32.0 contains a resource exhaustion vulnerability in the rdpecam client that lets malicious RDP servers request unadvertised camera media types. Attackers can send a StartStreamsRequest with oversized dimensions to force large pending-sample allocations and reconfigure the local camera through the HAL. | ||||
| CVE-2026-109597 | 1 Gohugo | 1 Hugo | 2026-10-16 | 5.4 Medium |
| Hugo from v0.60.0 before v0.167.0 contains a stored cross-site scripting vulnerability that allows Markdown content authors to inject HTML by supplying crafted explicit heading IDs. Attackers can break out of the unescaped href attribute in .TableOfContents or .Fragments.ToHTML output to inject elements with event handlers into rendered pages. | ||||
| CVE-2026-45562 | 2 Freepbx, Sangoma | 2 Security-reporting, Freepbx | 2026-10-16 | 7.2 High |
| FreePBX is an open source IP PBX. Prior to versions 16.0.4 and 17.0.6, the FreePBX Music on Hold (MoH) module contains a critical security flaw that allows authenticated attackers to execute arbitrary system commands with the privileges of the Asterisk service. Authentication with an existing FreePBX administrator account is required. The root cause lies in the fact that the module accepts a POST parameter that defines a custom Asterisk application, which is then stored in the database without any sanitization. Later, this data is written directly to the musiconhold_additional.conf configuration file without validation. Since Asterisk reads this configuration file and executes the specified application, an attacker can inject arbitrary commands that will be executed with Asterisk's permissions. This issue has been patched in versions 16.0.4 and 17.0.6. | ||||
| CVE-2026-54674 | 2 Freepbx, Sangoma | 2 Security-reporting, Freepbx | 2026-10-16 | 8.8 High |
| FreePBX is an open source IP PBX. Prior to versions 16.0.39 and 17.0.7, users authenticated via User Control Panel (UCP) are able to execute arbitrary commands on the PBX as the webserver user (typically asterisk) using specially crafted HTTP strings. Authenticated access to UCP is required. Note that this is often more common for less-privileged users to have UCP access vs. the Administrator Control Panel (ACP) access (which is usually FreePBX higher-level administrator accounts only). Insufficient sanitization of certain URL parameters utilized by UCP did not fully account for malicious strings in these fields. This could result in binaries being executed on the host server by carefully chaining commands. This issue has been patched in versions 16.0.39 and 17.0.7. | ||||
| CVE-2026-54675 | 2 Freepbx, Sangoma | 2 Security-reporting, Freepbx | 2026-10-16 | 8.8 High |
| FreePBX is an open source IP PBX. Prior to versions 16.0.10 and 17.0.5, a critical vulnerability exists in the sound language upload and conversion functionality that allows an authenticated attacker to perform arbitrary file writes, leading directly to remote code execution (RCE). Authentication with a known username is required. The vulnerability stems from insufficient path sanitization in the file conversion process, enabling path traversal attacks that place malicious PHP files in the web server's root directory. This issue has been patched in versions 16.0.10 and 17.0.5. | ||||
| CVE-2026-96618 | 1 Hexpm | 1 Hex | 2026-10-16 | 4.3 Medium |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex allows an untrusted package mirror to exhaust the memory or disk space of the machine running mix deps.get, mix deps.update, mix hex.package fetch or mix hex.docs fetch. Hex treats a mirror configured with HEX_MIRROR_URL, HEX_MIRROR or mirror_url as untrusted: it doesn't send credentials to it, and it checks registry signatures and package checksums that the mirror can't forge. Several response paths consume memory or disk in proportion to what the mirror sends before any of those checks run. Hex.HTTP.request/5 reads the whole response body into memory and decompresses it with :zlib.gunzip/1 whenever the response's Content-Encoding contains gzip, with no limit on the compressed or decompressed size. Hex doesn't ask for compressed responses, so the server decides whether this step runs. It applies to registry, package, docs and API responses. Package tarballs have no download size limit. Hex 2.5.1 holds the whole tarball in memory and writes it to the cache, and the development branch streams it to a temporary file; the 16 MiB tarball limit is checked only when the file is unpacked. The tarball is then unpacked, into deps/<app> in 2.5.1 and into a staging directory on the development branch, before its checksums are compared with the registry. mix hex.docs fetch, and mix hex.docs offline when docs are missing, write the docs tarball to disk and extract it with :mix_hex_erl_tar.extract/2 without the 16 MiB compressed and 128 MiB decompressed limits that mix_hex_tarball:unpack_docs/3 applies. The signed registry doesn't cover docs tarballs, so nothing checks them. Registry responses are also decompressed before their signature is checked, in hex_core code that Hex vendors; that part is tracked in https://github.com/hexpm/hex_core/security/advisories/GHSA-7c4r-cgf9-9jmq. This issue affects hex: from 0.11.2 before 2.5.2. | ||||
| CVE-2026-96535 | 1 Youmind | 1 Youmind Web Application | 2026-10-16 | N/A |
| Cross-Site Scripting on the YouMind portal, specifically in the avatar update endpoint, when setting a profile picture via an arbitrary URL. This occurs due to a lack of sanitisation and validation of SVG content when setting an SVG image containing embedded JavaScript code as the avatar. The file is served by the CDN with Content-Type: image/svg+xml and, when navigating directly to that URL, the script executes within the context of the CDN’s domain. | ||||