Export limit exceeded: 46941 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46941 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46210 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix use-after-free of fmt_src during MBPF check During concurrency testing, multiple instances can run in parallel, and each instance uses its own inst->lock while the core->lock protects the list of active instances. The race happens because these locks cover different scopes, inst->lock protects only the internals of a single instance, while the Macro Blocks Per Frame (MBPF) checker walks the core list under core->lock and reads fields like fmt_src->width and fmt_src->height. At the same time, iris_close() may free fmt_src and fmt_dst under inst->lock while the instance is still present in the core list. This allows a situation where the MBPF checker, still iterating through the core list, reaches an instance whose fmt_src was already freed by another thread and ends up dereferencing a dangling pointer, resulting in a use-after-free. This happens because the MBPF checker assumes that any instance in the core list is fully valid, but the freeing of fmt_src and fmt_dst without removing the instance from the core list is not correct. The correct ordering is to defer freeing fmt_src and fmt_dst until after the instance has been removed from the core list and all teardown under the core lock has completed, ensuring that no dangling pointers are ever exposed during MBPF checks. | ||||
| CVE-2026-31501 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix use-after-free of CPPI descriptor in RX path cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor. In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is freed via k3_cppi_desc_pool_free() before the psdata pointer is used by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1]. This constitutes a use-after-free on every received packet that goes through the timestamp path. Defer the descriptor free until after all accesses through the psdata pointer are complete. For emac_rx_packet(), move the free into the requeue label so both early-exit and success paths free the descriptor after all accesses are done. For emac_rx_packet_zc(), move the free to the end of the loop body after emac_dispatch_skb_zc() (which calls emac_rx_timestamp()) has returned. | ||||
| CVE-2026-104643 | 2026-10-15 | 4.2 Medium | ||
| The Easy HTTPS Redirection (SSL) WordPress plugin before 2.0.2 does not perform capability checks in some of its AJAX actions, allowing any authenticated user, such as a Subscriber, to read URLs its content scanner collected from private and draft posts and from site options, and to trigger a site-wide rewrite of those URLs, once an administrator has run a scan. | ||||
| CVE-2026-103304 | 2026-10-15 | 5.3 Medium | ||
| The eaSYNC Booking WordPress plugin before 1.3.31 does not perform authorization or nonce checks on several of its cancellation-related AJAX actions, allowing unauthenticated users to create booking cancellation requests, trigger booking notification emails, and overwrite the content of the emails the site sends. | ||||
| CVE-2026-105975 | 2026-10-15 | 5.3 Medium | ||
| The CamPay Shortcode Payment Gateway WordPress plugin before 1.7 does not verify the authenticity of Mobile Money payment confirmations and derives the payment result from client-supplied parameters, allowing unauthenticated attackers to mark payment records as paid, destroy genuine payment records, and write CamPay Shortcode Payment Gateway WordPress plugin before 1.7 meta onto arbitrary posts. | ||||
| CVE-2026-110451 | 1 Nixos | 1 Nix | 2026-10-15 | 4.3 Medium |
| Nix before 2.35.3 and Lix before 2.95.4 on macOS allow a Seatbelt sandbox escape (for an unconfined build) because a certain size threshold is mishandled. | ||||
| CVE-2026-106646 | 2026-10-15 | 5.9 Medium | ||
| The Classified Listing WordPress plugin before 6.1.1 does not verify that the requester owns or can edit the target listing when a gallery request references an unattached media item, allowing any authenticated user with a subscriber-level account to modify, corrupt or delete media-library attachments owned by other users, including administrators. | ||||
| CVE-2026-78193 | 2026-10-15 | 7.5 High | ||
| The JTL-Connector for WooCommerce plugin for WordPress is vulnerable to time-based SQL Injection via 'product.push' Identity Endpoint in all versions up to, and including, 2.4.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection fires during identity linking, before ProductController::push() executes, meaning exploitation succeeds even if downstream product handling would otherwise reject the request. | ||||
| CVE-2026-107158 | 2026-10-15 | 5.3 Medium | ||
| The LTL Freight Quotes WordPress plugin before 4.2.19 does not perform any authorization check or validation on one of its REST routes that writes to the database, allowing unauthenticated users to modify some of the LTL Freight Quotes WordPress plugin before 4.2.19's stored settings. | ||||
| CVE-2026-19198 | 1 Akaunting | 1 Akaunting | 2026-10-15 | N/A |
| Akaunting 3.1.21 contains an authenticated improper authorization vulnerability in the common BulkActions dispatcher.This issue affects Akaunting: 3.1.21. | ||||
| CVE-2026-103907 | 2026-10-15 | 6.5 Medium | ||
| The JNews - Jeg Elementor Kit plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on both the 'jkit_post_block' and 'jeg_find_author' AJAX actions in versions up to, and including, 3.2.19. The 'wp_ajax_jkit_post_block' handler (registered generically for every element via wp_ajax_{$element_id} in Elements_Option_Abstract::setup_hook) returns the element's full option schema — including a freshly minted wp_create_nonce('jeg_find_author') — to any authenticated caller, and the 'wp_ajax_jeg_find_author' handler then runs a WP_User_Query with the attacker-supplied 'query' wrapped in '*…*' against search_columns that include user_email, echoing the ID and display_name of every matching user. This makes it possible for authenticated attackers, with Subscriber-level access and above, to enumerate every registered user of the site and to reconstruct arbitrary users' email addresses one character at a time by using the substring search as an oracle. | ||||
| CVE-2026-98402 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 __traceiter_icmp_send include/trace/events/icmp.h:11 [inline] __do_trace_icmp_send include/trace/events/icmp.h:11 [inline] trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11 __icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013 ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline] ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287 dst_link_failure include/net/dst.h:438 [inline] vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307 TP_fast_assign() unconditionally calls udp_hdr(skb) before checking whether the packet is UDP. Furthermore, __icmp_send() can be invoked from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET) where skb->transport_header was never initialized (~0U). Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)). Fix this by: 1. Only parsing transport info when iph->protocol == IPPROTO_UDP. 2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2) to safely fetch the UDP header without assuming transport_header is set. | ||||
| CVE-2026-109302 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-10-15 | 3.7 Low |
| Parse Server 8.2.2 before 8.6.94 and 9.0.0 before 9.10.1-alpha.14 applies its GraphQL introspection control only to operation text sent directly with a request, not to operations resolved from Apollo Server's automatic persisted query cache. Unauthenticated attackers holding the public Application Id and client key can replay an introspection query previously cached by a master or maintenance key client to retrieve the schema, including private class and field names. | ||||
| CVE-2026-109282 | 1 Imagemagick | 1 Imagemagick | 2026-10-15 | 2.5 Low |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a type confusion flaw in the INFO, JSON and YAML encoders, where an internal method receives a pointer of an unexpected type when writing an image in a compressed format. An attacker who can cause such an image write can trigger a SIGABRT or SIGSEGV, crashing the process and causing denial of service. | ||||
| CVE-2026-110602 | 1 Libmspack Project | 1 Libmspack | 2026-10-15 | 6.3 Medium |
| libmspack through 0.11alpha contains an uninitialized pointer free vulnerability in kwajd_open() in mspack/kwajd.c that frees unzeroed filename and extra pointers on header read errors. Attackers can supply a truncated, empty, or wrong-signature KWAJ file to crash the process or obtain an arbitrary-free memory corruption primitive. | ||||
| CVE-2026-108913 | 1 Omarchy | 1 Omarchy | 2026-10-15 | 7.1 High |
| omarchy-theme-set in Omarchy 4 before 4.0.1 allows code execution via a third-party theme because the files placed into ~/.local/state/omarchy/current/theme may include executable content from an untrusted Git repository. | ||||
| CVE-2026-53400 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter registration race Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration. | ||||
| CVE-2026-52929 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. | ||||
| CVE-2026-46243 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. | ||||
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | ||||