Export limit exceeded: 11999 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11999 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34971 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 7.8 High |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-34987 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 9.9 Critical |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2023-25546 | 2026-04-15 | 2.5 Low | ||
| Out-of-bounds read in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable denial of service via local access. | ||||
| CVE-2024-56083 | 2026-04-15 | 8.1 High | ||
| Cognition Devin before 2024-12-12 provides write access to code by an attacker who discovers the https://vscode-randomly_generated_string.devinapps.com URL (aka the VSCode live share URL) for a specific "Use Devin's Machine" session. For example, this URL may be discovered if a customer posts a screenshot of a Devin session to social media, or publicly streams their Devin session. | ||||
| CVE-2024-25939 | 2026-04-15 | 6 Medium | ||
| Mirrored regions with different values in 3rd Generation Intel(R) Xeon(R) Scalable Processors may allow a privileged user to potentially enable denial of service via local access. | ||||
| CVE-2024-32482 | 2026-04-15 | 2.2 Low | ||
| The Tillitis TKey signer device application is an ed25519 signing tool. A vulnerability has been found that makes it possible to disclose portions of the TKey’s data in RAM over the USB interface. To exploit the vulnerability an attacker needs to use a custom client application and to touch the TKey. No secret is disclosed. All client applications integrating tkey-device-signer should upgrade to version 1.0.0 to receive a fix. No known workarounds are available. | ||||
| CVE-2025-1400 | 2026-04-15 | 3.1 Low | ||
| Out-of-bounds Read vulnerability in unpack_response (conn.c) in libplctag from 2.0 through 2.6.3 allows Overread Buffers via network. | ||||
| CVE-2025-0591 | 1 Omron | 1 Cx-programmer | 2026-04-15 | 7.8 High |
| Out-of-bounds Read vulnerability (CWE-125) was found in CX-Programmer. Attackers may be able to read sensitive information or cause an application crash by abusing this vulnerability. | ||||
| CVE-2024-0794 | 2026-04-15 | 9.8 Critical | ||
| Certain HP LaserJet Pro, HP Enterprise LaserJet, and HP LaserJet Managed Printers are potentially vulnerable to Remote Code Execution due to buffer overflow when rendering fonts embedded in a PDF file. | ||||
| CVE-2020-26312 | 2026-04-15 | 8.1 High | ||
| Dotmesh is a git-like command-line interface for capturing, organizing and sharing application states. In versions 0.8.1 and prior, the unsafe handling of symbolic links in an unpacking routine may enable attackers to read and/or write to arbitrary locations outside the designated target folder. The routine `untarFile` attempts to guard against creating symbolic links that point outside the directory a tar archive is extracted to. However, a malicious tarball first linking `subdir/parent` to `..` (allowed, because `subdir/..` falls within the archive root) and then linking `subdir/parent/escapes` to `..` results in a symbolic link pointing to the tarball’s parent directory, contrary to the routine’s goals. This issue may lead to arbitrary file write (with same permissions as the program running the unpack operation) if the attacker can control the archive file. Additionally, if the attacker has read access to the unpacked files, they may be able to read arbitrary system files the parent process has permissions to read. As of time of publication, no patch for this issue is available. | ||||
| CVE-2024-35371 | 1 Ant-media | 1 Ant-media-server | 2026-04-15 | 7.5 High |
| Ant-Media-Serverv2.8.2 is affected by Improper Output Neutralization for Logs. The vulnerability stems from insufficient input sanitization in the logging mechanism. Without proper filtering or validation, user-controllable data, such as identifiers or other sensitive information, can be included in log entries without restrictions. | ||||
| CVE-2024-37877 | 1 Ueranism | 1 Ueranism | 2026-04-15 | 5.5 Medium |
| UERANSIM before 3.2.6 allows out-of-bounds read when a RLS packet is sent to gNodeB with malformed PDU length. This occurs in function readOctetString in src/utils/octet_view.cpp and in function DecodeRlsMessage in src/lib/rls/rls_pdu.cpp | ||||
| CVE-2024-37795 | 1 Cvc5 | 1 Cvc5 | 2026-04-15 | 7.5 High |
| A segmentation fault in CVC5 Solver v1.1.3 allows attackers to cause a Denial of Service (DoS) via a crafted SMT-LIB input file containing the `set-logic` command with specific formatting errors. | ||||
| CVE-2025-0831 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Read vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file. | ||||
| CVE-2025-32412 | 2026-04-15 | 7.8 High | ||
| Fuji Electric Smart Editor is vulnerable to an out-of-bounds read, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2024-31150 | 1 Intel | 1 Graphics Driver | 2026-04-15 | 3.8 Low |
| Out-of-bounds read for some Intel(R) Graphics Driver software may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2024-12212 | 2026-04-15 | 7.8 High | ||
| The vulnerability occurs in the parsing of CSP files. The issues result from the lack of proper validation of user-supplied data, which could allow reading past the end of allocated data structures, resulting in execution of arbitrary code. | ||||
| CVE-2024-54090 | 2026-04-15 | 5.9 Medium | ||
| A vulnerability has been identified in APOGEE PXC Series (BACnet) (All versions), APOGEE PXC Series (P2 Ethernet) (All versions), TALON TC Series (BACnet) (All versions). Affected devices contain an out-of-bounds read in the memory dump function. This could allow an attacker with Medium (MED) or higher privileges to cause the device to enter an insecure cold start state. | ||||
| CVE-2025-32899 | 1 Kde | 1 Kdeconnect | 2026-04-15 | 4.3 Medium |
| In KDE Connect before 1.33.0 on Android, a packet can be crafted that causes two paired devices to unpair. Specifically, it is an invalid discovery packet sent over broadcast UDP. | ||||
| CVE-2024-38389 | 1 Fujielectric | 2 Tellus, Tellus Lite | 2026-04-15 | 7.8 High |
| There is an Out-of-bounds read vulnerability in TELLUS (v4.0.19.0 and earlier) and TELLUS Lite (v4.0.19.0 and earlier). If a user opens a specially crafted file, information may be disclosed and/or arbitrary code may be executed. | ||||