Export limit exceeded: 46857 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46857 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97978 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: ice: don't dereference pointers from TP_printk() After forwarding net-next during the v7.3 merge window we started seeing: TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b this is due to extra checks added in tracing subsystem in commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()"). Printing happens long after the event was recorded, by which point the pointers may be invalid (the ring or the dim instance). Copy the eight scalars into the event instead. | ||||
| CVE-2026-97961 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | ||||
| CVE-2026-97950 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_target() as well, under ->d_lock and atomically with the item reference, and pass it down to create_link(). A hashed dentry has not been killed yet, so its ->d_fsdata reference keeps the dirent alive there. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||
| CVE-2026-97938 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid() reads it and passes it to pid_vnr() without protecting the lifetime of the referenced struct pid. A concurrent writer can replace cad_pid and drop the final reference to the old struct pid after the reader has loaded the pointer but before pid_vnr() has finished dereferencing it, causing a use-after-free. kill_cad_pid() has the same lifetime race when it passes cad_pid to kill_pid(). At the time this issue was reported, an unprivileged user could reach the sysctl through user and PID namespaces because cad_pid was registered in pid_table[]. Moving cad_pid back to the global reboot sysctl table corrected that namespace and permission mismatch, but did not fix the underlying lifetime race. Fix this by treating cad_pid as an RCU-protected pointer at both read sites and by waiting for a grace period before dropping the old reference on the write side. call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid() also queues pid->rcu; queueing the same rcu_head twice can corrupt the RCU callback list. Original KASAN crash stack: kernel/pid.c:545 pid_nr_ns() # reads freed pid->level kernel/pid.c:556 pid_vnr() # calls pid_nr_ns() kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) | ||||
| CVE-2026-97933 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an admin was deleting and creating trace instances at the same time and the memory of the old trace_array's array matched the memory of the new trace_array that it could in theory open the option from the wrong trace array. But we do not care because it would be stupid to perform that kind of action. As long as the only thing that can happen is that the option from the wrong trace array is used and doesn't crash the kernel it will only make the user confused. But if they are doing something stupid like this, they are already confused, so no harm done. | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97600 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: cc2520: fix FIFOP work use-after-free The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal, cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ remains active until after ->remove() returns and can queue the work again after that flush, allowing it to run after the private data is released. Disable the work with disable_work_sync() instead of flushing it, so the handler can no longer queue it once removal begins. Destroy the buffer mutex last, since the worker and the stop callback invoked through ieee802154_unregister_hw() both take it. Found by an in-house static analysis tool. | ||||
| CVE-2026-97528 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there. | ||||
| CVE-2026-97515 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state. | ||||
| CVE-2026-97492 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed In case reconfiguration of NAN fails, we call ieee80211_handle_reconfig_failure, that marks all interfaces as not in the driver. Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces is called to destroy all the interfaces. If we have any other interface but the NAN one, for example a BSS station, then when its state (links, stations) will be removed, we won't tell the driver about this, because we will think that the interfaces are not in the driver, and then drivers might remain with dangling pointers to objects like stations and links (at least for iwlwifi this is the case). ieee80211_handle_reconfig_failure is meant to be called after we cleaned up the state in the driver, there is no reason to call it for NAN reconfiguration failure. Fix the code to just warn in such a case, as we do in other error paths in reconfig where it is too complicated to rewind. | ||||
| CVE-2026-97432 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix P2P-Device binding handling Our binding handling for P2P-Device can run into the following scenario, as observed by our testing: - a station interface is connected on some channel - the P2P-Device does a remain-on-channel (ROC) on that channel - the ROC ends, and the P2P-Device is removed from the binding, but the phy_ctxt pointer is left around as a PHY cache so we don't need to recalibrate to the channel again and again in case it's not shared - a binding update by the station interface, even a removal, will re-add the P2P-Device to the binding - the P2P-Device is removed, which removes the PHY context, but it's still in the binding so the firmware crashes Since the P2P device is removed from the binding and only re- added by unrelated code, but we want to keep the phy_ctxt around as a cache for future ROC usage, fix it by adding a boolean that indicates whether or not the P2P-Device should be added to the binding, and handle that in the binding iterator. That way, the station interface cannot re-add the P2P-Device to the binding when that isn't active. | ||||
| CVE-2026-97412 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: quiesce DMA before freeing resources pdsc_teardown() frees DMA buffers but does not disable bus mastering, leaving the device able to perform DMA after the buffers are freed. This can lead to use-after-free if the device writes to freed memory. Add pci_clear_master() to pdsc_teardown() to disable bus mastering before freeing resources, ensuring all DMA is quiesced. Add pci_set_master() to pdsc_setup() to re-enable bus mastering, which is needed for the firmware recovery path since pdsc_teardown() now disables it. | ||||
| CVE-2026-74752 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids. | ||||
| CVE-2026-74711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. | ||||
| CVE-2026-74697 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption. | ||||
| CVE-2026-74653 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb() look up the dmb_node under dmb_ht_lock, drop the lock and only then operate on the node's refcount. Nothing keeps the node alive across that window: __dibs_lo_unregister_dmb() removes the node from the hash table under the write lock and immediately frees it. A concurrent final put can therefore free the node between the lookup and the refcount operation: CPU0 (attach) CPU1 (owner unregisters) read_lock_bh(&dmb_ht_lock) find dmb_node (refcnt == 1) read_unlock_bh(&dmb_ht_lock) refcount_dec_and_test() 1 -> 0 write_lock_bh(&dmb_ht_lock) hash_del(&dmb_node->list) write_unlock_bh(&dmb_ht_lock) kfree(dmb_node) refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free The same window exists for the refcount_dec_and_test() calls in the detach and unregister paths. Close the race structurally by making hash table membership and the refcount transitions atomic with respect to each other: - Perform the final refcount_dec_and_test() and hash_del() in a single dmb_ht_lock write-side critical section, in both the unregister and the detach path. Freeing the node still happens after the lock is dropped, which is safe because a node whose refcount reached zero has left the hash table and can no longer be found. - This establishes the invariant that any node found in the hash table holds at least one reference, and that the final reference can only be dropped under the write lock. dibs_lo_attach_dmb() can thus take its reference with a plain refcount_inc() while still holding the read lock; refcount_inc_not_zero() is no longer needed. __dibs_lo_unregister_dmb() no longer touches the hash table and is renamed to dibs_lo_free_dmb() accordingly. Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved the code to its current location; the race was introduced earlier by commit c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism"). Tested SMC-D via ISM and dibs loopback. | ||||