Export limit exceeded: 407555 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 407555 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26068 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26068 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63963 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. | ||||
| CVE-2026-63962 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. | ||||
| CVE-2026-63964 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL. | ||||
| CVE-2026-63965 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix stack leak in bmp580 trigger handler bmp580_trigger_handler() declares its scan buffer on the stack without an initializer and then memcpy()s 3 bytes of 24-bit sensor data into each 4-byte __le32 field. The high byte of comp_temp and comp_press is left uninitialized, and the channel storagebits is 32, so two bytes of stack are pushed to userspace per scan. This is a regression from when the buffer lived in the private data, the move to a stack-local struct dropped the implicit zeroing. bme280_trigger_handler() was fixed up to handle this bug, but this driver was not fixed because there was no padding hole, but rather a short-fill issue. Fix this all by just zero-initializing the structure on the stack. | ||||
| CVE-2026-63966 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16550: fix stack leak in trigger handler adis16550_trigger_handler() declares the scan data array on the stack without initializing it. The memcpy() at the bottom fills only the first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the 8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data which leaks to userspace on ever trigger. Fix this all by just zero-initializing the structure on the stack. | ||||
| CVE-2026-63967 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack. | ||||
| CVE-2026-63968 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev | ||||
| CVE-2026-98432 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch. | ||||
| CVE-2026-63873 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range() aie2_populate_range() jumps back to the again label without calling mmput(mm), leaking a reference to the mm_struct. Add the missing mmput() before jumping to again. | ||||
| CVE-2026-63875 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | | ||||
| CVE-2026-63874 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: usb: fix race between urb completion and rx_retry cancellation It's possible that sequencing between setting ->stopped and cancelling the rx_retry work (in ndo_stop) could leave us with an urb queued: T1: ndo_stop T2: rx_retry_work ------------ ---------------- LD: ->stopped => false ST: ->stopped <= true usb_kill_urb() mctp_usb_rx_queue() usb_submit_urb() cancel_delayed_work_sync() That urb completion can then re-schedule rx_retry_work. Strenghen the sequencing between the stop (preventing another requeue) and the cancel by updating both atomically under a new rx lock. After setting ->rx_stopped, and cancelling pending work, we know that the requeue cannot occur, so all that's left is killing any pending urb. | ||||
| CVE-2026-63876 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally. | ||||
| CVE-2026-63877 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time. | ||||
| CVE-2026-63878 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check num_entries in GEM_OP GET_MAPPING_INFO kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at amdgpu_gem.c:1050 uses the user-supplied num_entries directly without any upper bounds check. Since num_entries is a __u32 and sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries produces an allocation exceeding INT_MAX, triggering WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING, TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems. Add a size bounds check before we invoke the kvzalloc() to reject oversized num_entries early with -EINVAL. (cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d) | ||||
| CVE-2026-63880 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl() holds three cleanup-tracked resources before calling kvcalloc(): the drm_gem_object reference from drm_gem_object_lookup(), the drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and the drm_exec lock on the per-process VM root page directory via amdgpu_vm_lock_pd(). All three are released by the out_exec label that every other error path in this function jumps to. The kvcalloc() failure path returns -ENOMEM directly, skipping out_exec and leaking all three. The leaked per-process VM root PD dma_resv lock is the load-bearing leak: any subsequent operation on the same VM (further GEM ops, command-submission, eviction, TTM shrinker callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local denial of service against the caller's GPU context, reachable by any process with /dev/dri/renderD* access. Route the failure through out_exec so drm_exec_fini() and drm_gem_object_put() run. Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega (Lucienne): the failing ioctl returns -ENOMEM and a second GET_MAPPING_INFO on the same fd then blocks in drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the caller does not reap the task; the fd-release path during process exit goes through amdgpu_gem_object_close() -> drm_exec_prepare_obj() on the same lock, leaving the task in D state until the box is rebooted. The patched kernel was not rebuilt and re-tested on this hardware; the fix is mechanical. Tested on a single Lucienne / Vega box only. Ziyi Guo posted an independent INT_MAX-bound check for args->num_entries in the same branch [1]; the two patches are complementary and can land in either order. (cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) | ||||
| CVE-2026-63897 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). | ||||
| CVE-2026-63898 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63899 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. | ||||
| CVE-2026-63900 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. | ||||
| CVE-2026-63901 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. | ||||