| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix the recvmsg window update
iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without
testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes
the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2
is zero and one recvmsg() on its own socket is enough for an unprivileged
process to take a spurious disconnect.
It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which
allocates GFP_KERNEL inside a section the code treats as atomic. Sending
outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where
msg_recv is sampled for the advertised window and subtracted after
dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock()
while recvmsg holds no socket lock, so both can subtract the same value,
the counter goes negative and the credit reaches the peer twice.
Test the transport, claim the credit with atomic_xchg() after the last
error exit and hand it back if the transmit fails, and send once the lock
is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb->len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transport header inside the
Ethernet header.
Such skbs are not exotic:
- At the time of commit d0c081b49137 ("flow_dissector: properly cap
thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO
skbs larger than 64KB (MTU checks are skipped for GSO, and
alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0
pages on top of the linear part).
- BIG TCP now makes skbs larger than 64KB common.
- The following patch makes tun_get_user() dissect IFF_TAP frames
before eth_type_trans() pulls the Ethernet header, so a GSO frame
carrying a 65522..65535 byte L3 packet will be dissected with
skb->len in [65536, 65549].
Compare as u32 instead. If the resulting offset cannot be represented
in the u16 key_control->thoff, cap it to U16_MAX and report the
dissection as failed rather than silently returning a wrong transport
offset. thoff is still set on failure, as some callers (such as
eth_get_headlen()) use it regardless of the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect()
bpf_flow_dissect() sanitizes the offsets returned by the BPF program
with clamp_t(u16, ..., hlen).
If hlen is bigger than 65535, the upper bound is truncated before
the comparison. For instance, with hlen == 65536, both nhoff and
thoff are forced to zero, even if the program returned sane values.
This is the same class of bug as the one fixed in commit 99bda1ecbd56
("flow_dissector: avoid u16 truncation of skb->len when computing
thoff"). That fix does not cover the BPF path, because
__skb_flow_dissect() returns early when a BPF flow dissector
handles the packet.
struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen
to U16_MAX before clamping.
Found by sashiko while reviewing the commit above. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: fix swapped arguments in nlmsvc_match_ip()
When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip,
nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server
sockaddr as the opaque @data argument:
nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL);
The match callback is later invoked from nlm_traverse_locks() as:
match(lockhost, host);
where the first argument is the nlm_host that owns the lock, and the
second argument is the @data that was originally passed down (here the
server sockaddr). This is the convention every other match callback
relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()):
arg1 is the real nlm_host, arg2 is the caller-supplied reference value.
nlmsvc_match_ip() has had these two arguments reversed ever since the
unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd:
unlock lockd locks associated with a given server ip"):
return rpc_cmp_addr(nlm_srcaddr(host), datap);
Here @host is actually the server sockaddr, so nlm_srcaddr(host)
dereferences a struct sockaddr as a struct nlm_host and reads garbage
at the offset of h_srcaddr; meanwhile @datap is actually the lock
owner's nlm_host but is compared as a sockaddr. As a result the
comparison practically never matches and locks are not released for the
requested IP.
Swap the arguments so the lock owner's source address is compared
against the requested server address:
return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host);
[ cel: fix the misleading typedef parameter names too ] |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which compares below
any non-zero 'sectors', so the check is bypassed and the malformed
record is accepted.
The accepted mlcn is then used unchanged in
sbi->mft.lbo = mlcn << cluster_bits;
In practice the resulting reads fail at the block layer (sb_bread()
returns NULL via grow_buffers()'s check_mul_overflow() guard), so
today this manifests as mount failing in odd places rather than as
something more dangerous, but the validation step is still wrong
and there is no reason for callers to rely on the block layer to
catch a value that should never have been accepted in the first
place.
Use check_mul_overflow() to compute the two sector positions and
fail the mount if either multiplication wraps; this preserves the
existing semantics (mlcn * sct_per_clst >= sectors) instead of
switching to division (mlcn >= sectors / sct_per_clst), which
would tighten the check at edge cases where 'sectors' is not a
multiple of sct_per_clst. The check_*_overflow() style is the
one ntfs3 already uses for similar on-disk arithmetic in
fs/ntfs3/run.c. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for the rest of its life.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants: page_cache_sync_ra() cuts readahead to a single
page, page_cache_async_ra() skips it altogether, and
__folio_throttle_swaprate() takes swap_avail_lock and schedules a
throttle on anonymous folio allocation.
Clear it explicitly, after the list removal and the synchronous
hrtimer_cancel() so that neither timer processing nor an I/O path can
re-arm it. The free callback can also see policy data which was never
attached to a blkg, hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec_file: Prevent kexec range truncation
Sashiko AI review pointed out the following issue.
The __merge_memory_ranges() function incorrectly handles overlapping
memory ranges when merging them. Although sort_memory_ranges() sorts all
ranges by their start address in ascending order beforehand, the merge
logic remains defective in two ways:
1. It compares the current range's start against the previous element (i-1)
instead of the running target index (idx)
2. It unconditionally overwrites 'ranges[idx].end' with 'ranges[i].end'.
This logic flaw leads to critical memory truncation when a larger memory
range completely subsumes subsequent smaller ranges.
For example, consider a sorted input array with three ranges:
Range A (idx=0): [0x1000 - 0x9000]
Range B (i=1): [0x2000 - 0x5000] (completely inside Range A)
Range C (i=2): [0x6000 - 0x8000] (completely inside Range A)
1. When i=1 (Range B):
ranges[1].start (0x2000) <= ranges[0].end + 1 (0x9001) is TRUE.
The code executes: ranges[0].end = ranges[1].end, which erroneously
shrinks Range A's end from 0x9000 down to 0x5000.
2. When i=2 (Range C):
ranges[2].start (0x6000) <= ranges[1].end + 1 (0x5001) is FALSE.
The code falls into the else block, creating a broken new range.
As a result, valid memory fragments [0x5001 - 0x5fff] and [0x8001 - 0x9000]
are completely lost from the kexec exclude lists, potentially allowing
the crash kernel to overwrite active memory, causing data corruption
or crashes.
Fix this by ensuring the start of the current range is compared against the
end of the active merged range (idx), and use max() to safely prevent the
outer boundary from being truncated. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix incorrect pruning due to atomic fetch precision tracking
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit |
| Botan is a C++ cryptography library. From 2.1.0 until 3.13.0, the Botan C API function botan_block_cipher_block_size converted a size_t block size to int without a bounds check. In an application that accepts external algorithm parameter strings and uses the FFI raw ECB mode, an attacker can select the variable-block-size Lion cipher so that the reported size is truncated, the caller allocates insufficient memory, and later block processing causes memory corruption. The C++ API and normally used C API modes such as CBC and CTR are unaffected. This issue is fixed in version 3.13.0. |
| An integer overflow in the MessagePack\BufferUnpacker component of rybakit/msgpack versions prior to 0.11.0 allows attackers to cause a denial of service via crafted MessagePack input when the application runs on 32-bit PHP |
| A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20. |
| Integer overflow, use-after-free in the Graphics: Text component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
| Incorrect boundary conditions in the Layout: Scrolling and Overflow component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| An incorrect calculation in Decimal128 string parsing in the MongoDB C Driver can accept certain over-precision inputs containing leading zeros instead of rejecting them. This produces a value different from the supplied text. An actor who can provide a decimal string to an embedding application, including through Extended JSON parsing, can cause the application to store or use an incorrect numeric value. |
