| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libxml2. A local user or an attacker providing a specially crafted XML catalog can trigger a NULL pointer dereference during XML catalog parsing. This occurs when a `nextCatalog` element lacks its mandatory `catalog` attribute, leading to the application crashing and causing a Denial of Service (DoS). |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Drupal Drupal core allows Reflection Injection. This issue affects Drupal core versions: from 8.9.0 to 10.6.19, from 11.0.0 to 11.3.19, from 11.4.0 to 11.4.10, from 12.0.0-alpha1 to 12.0.0-beta2. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Drupal Entity List allows Reflection Injection. This issue affects Entity List versions: from 0.0.0 to 3.0.10. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix data race and NULL deref on local->assoc_dev
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion. |
| A NULL Pointer Dereference vulnerability [CWE-476] vulnerability in Fortinet FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.9.0, FortiPAM 1.8 all versions, FortiPAM 1.7 all versions, FortiPAM 1.6 all versions, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.6.0 through 7.6.6, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions may allow an authenticated attacker to crash the httpsd daemon via crafted HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and
KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve()
tests the bit while vcpu_has_sve() reads the flag. A host that sets the
flag without the bit gets a vCPU with a NULL sve_state that the world
switch loads the guest's SVE state from.
Derive the flag from the bit, and drop the protected path's copy of the
host's flag, which is dead code since protected VMs are not allowed SVE. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), c.session.serverCertificate, RSA key exchange to process the relevant input or security decision. node-forge's TLS client checked the wrong property when deciding whether a server certificate was missing. A malicious TLS server or on-path peer could omit the Certificate message and reach code that dereferenced the absent certificate, causing an uncaught exception and terminating the connection or process. This issue is fixed in version 1.4.1. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used pki.verifyCertificateChain(), pki.createCaStore(), duplicate subject names to process the relevant input or security decision. node-forge modified the CA store while trying certificates that shared a subject name during pki.verifyCertificateChain(). A failed chain verification could permanently remove trusted CA certificates from the store, causing later valid chains to fail and creating a persistent availability impact for applications that reused the store. This issue is fixed in version 1.4.1. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), fragmented handshake message, interleaved record to process the relevant input or security decision. node-forge continued processing after a TLS record of another content type interrupted a fragmented handshake message. A remote peer could trigger an uncaught TypeError in process(), causing the connection or hosting process to fail. This issue is fixed in version 1.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation. |
| Null pointer dereference in Windows Audio Service allows an authorized attacker to disclose information locally. |
| Null pointer dereference in Windows Message Queuing Queue Manager allows an authorized attacker to deny service over a network. |
| MLflow is an open source AI engineering platform for agents, large language models, and machine learning models. From 3.12.0rc0 until 3.17.0, the scorer invoke, register, and GenAI evaluate endpoints, including unauthenticated POST /ajax-api/3.0/mlflow/scorer/invoke, accept serialized third-party scorer data that Scorer.model_validate_json resolves using a module-path allowlist without constraining the selected class or its constructor arguments. When optional trulens and trulens-providers-litellm packages are installed, an attacker can select mlflow.genai.scorers.trulens, choose a model URI outside MLflow's native provider registry so execution uses the LiteLLM fallback, and supply api_base and api_key values that cause the server to send an outbound request to an attacker-chosen or internal host with attacker-controlled headers and body. The vulnerable deserialization occurs before a tracking-store lookup or job submission. This issue is fixed in version 3.17.0. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: prevent mark additions during connector teardown
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn->lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules. |
| P-Net before 1.0.3 dereferences a NULL AR pointer when handling an implicit read request without a valid target AR UUID for a record index that requires an AR (AR specific indices 0xE000-0xEFFF, and the expected identification data of a slot or subslot). A remote unauthenticated attacker can send such a request to crash the device (denial of service). |
| Null pointer dereference in Windows DHCP Server allows an unauthorized attacker to deny service over a network. |
| Null pointer dereference in Active Directory Domain Services allows an authorized attacker to deny service over a network. |
| Mattermost versions 11.10.x <= 11.10.0, 11.7.x <= 11.7.9, 11.9.x <= 11.9.1, 11.8.x <= 11.8.5 fail to verify the integrity of the SAML RelayState POST parameter which allows an authenticated SAML user to join any team, including invite-only teams, via forging the team_id or invite_id fields in the RelayState.. Mattermost Advisory ID: MMSA-2026-00727 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
nullable. The verifier rejects an unchecked dereference while preserving
access after the program checks the pointer for NULL. |
| P-Net before 1.0.3 dereferences a NULL AR pointer in pf_fspm_cm_read_ind() when handling an implicit read request without a valid target AR UUID for a user specific record index, if the application has registered a read callback. A remote unauthenticated attacker can send such a request to crash the device (denial of service). |
