| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Starlet versions before 0.33 for Perl send a body in responses to HEAD requests, corrupting the next response on a persistent or pipelined connection.
The request method is not passed to the response writer, so whatever body the application returns for a HEAD request is sent. With Plack::Middleware::Head the body is empty, but an HTTP/1.1 response without a Content-Length header still gets the chunked encoding terminator. Responses with status 204 or 304 are also sent with their body.
Pipelined GET and HEAD requests keep the connection open even when keep-alive is disabled, which is the default. A client or proxy reading the connection takes the extra bytes as the start of the next response, which may desynchronize a proxy that shares the connection across clients. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12
svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB.
However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and
clearing clean bits in vmcb12 is not architecturally defined.
Move vmcb_mark_dirty() to callers and drop it for vmcb12.
This also facilitates incoming refactoring that does not pass the entire
VMCB to svm_copy_lbrs(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix zero size inode with non-zero size after log replay
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon. |
| A flaw was found in Undertow. A remote attacker can exploit this vulnerability by sending `\r\r\r` as a header block terminator. This can be used for request smuggling with certain proxy servers, such as older versions of Apache Traffic Server and Google Cloud Classic Application Load Balancer, potentially leading to unauthorized access or manipulation of web requests. |
| A flaw was found in the ChunkReader component of the Undertow web server, which is used to handle chunked transfer encoding in HTTP requests. The issue occurs because a security check for the chunk size is performed before the value is shifted, allowing a specifically crafted 15-digit chunk size to bypass the limit and overflow into internal state flags. This can cause the server to terminate a request body prematurely and interpret the remaining data as a separate, smuggled request. |
| Coder before 2.29.21, 2.30.0 before 2.34.12, 2.35.0 before 2.35.9, 2.36.0 before 2.36.7, and 2.37.0 before 2.37.4 does not validate the audience claim of GCE instance-identity JWTs at the POST /api/v2/workspaceagents/google-instance-identity endpoint. Attackers who obtain an unexpired format=full identity token minted for another relying party can replay it to obtain that workspace agent's session token, which remains valid until the workspace's next build. |
| Insufficient preservation of the original sender in the forwarding of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write, naming in its From an address at a domain the server hosts, delivered to other receivers as passing that domain's DMARC policy. When the server sent on a copy of mail that came from outside - an account's forward, a mail rule's forward, a Sieve redirect, a list's copy, or an alias or list expanding to an outside address - it could give the copy an SMTP identity in the organisation of the domain the copy's From names, whatever the message's origin: with the Sender Rewriting Scheme or the rewrite of the envelope sender on forwarding enabled (both off by default), an address at the forwarding domain; for a list, its bounce address; for a message with an empty envelope sender, none, under the server's own host name; and an envelope sender the message came with at a subdomain of a hosted domain was kept. Where that identity's SPF record authorises the server, other receivers' SPF check of the copy passed for a domain aligned with the From, and DMARC passed with it, although the message had not passed DMARC when the server received it. Exploitation needs a forward, redirect, alias or list that carries the hosted domain's mail to an outside address, and one of: SRS or the envelope rewrite enabled; a list whose bounce address is in the domain's organisation; an envelope sender at a subdomain whose SPF record authorises the server; or, for an empty envelope sender, an SPF record that authorises the server under its host name. The DKIM route to the same result is CVE-2026-107567. |
| actix-http versions before 3.12.1 contain an HTTP request smuggling vulnerability in the HTTP/1.1 parser that accepts requests with both Content-Length and Transfer-Encoding: chunked headers. Unauthenticated remote attackers can exploit this through a front-end intermediary to desynchronize backend requests and smuggle malicious HTTP requests to the Actix service. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Fix AMD TLBI Erratum #1718
The processor may fail to invalidate a TLB entry while executing an
INVLPGB/TLBSYNC instruction pair.
Detect the erratum and apply a software workaround when a microcode fix
is not present. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.web.http.HTTPChannel.headerReceived rejects a NUL byte in an HTTP header value but accepts a bare carriage return or bare line feed. Because Twisted splits header lines only on CRLF, a hidden Content-Length header can remain folded into another value while a lenient front end treats the bare character as a line terminator. The resulting framing disagreement can smuggle a following request past front-end access controls, poison a shared connection or cache, and expose a later client to the wrong response. This issue is an incomplete-fix residual of earlier Twisted request-smuggling protections. This issue is fixed in version 26.10.0rc1. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. From 1.20.0 until 1.21.1, the Angular DevTools background service worker accepts chrome.runtime.sendMessage runtime messages from untrusted web pages or third-party content scripts without adequately verifying the message source. An untrusted sender that obtains a valid randomized victim tabId can direct the extension to use chrome.debugger to attach to another browser tab and trigger Chrome DevTools Protocol breakpoints. This can display the debugging banner, pause JavaScript execution, and prevent interaction with the target tab, but it does not provide remote code execution, privilege escalation, or cross-origin access to memory or credentials. This issue is fixed in version 1.21.1. |
| HCL BigFix AEX is affected by a Server-Side Request Forgery vulnerability, which could allow an attacker to cause the application to send unauthorized requests to external resources. Successful exploitation could lead to access to unintended services, sensitive information disclosure, or unauthorized actions through the affected application. |
| In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP/1.x decoder uses a canonicalization for well known HTTP headers, the canonicalization process interprets well crafted headers as headers of this list, allowing for instance Content-Xength to be interpeted as Content-Length.
This can be exploited for request smuggling purpose.
The impacted component is io.vertx:vertx-core. |
| Echo is a Go web framework. From 4.0.0 until 4.16.1 and 5.4.1, Echo's Proxy middleware selects a raw tunnel from a client WebSocket upgrade request before verifying that the configured upstream accepted the upgrade. If the upstream rejects the upgrade with an ordinary keep-alive response, later HTTP requests on the connection are sent directly to that upstream without passing through Echo's router or route-specific middleware. This can bypass authentication or authorization enforced only by Echo routes, but requires an accessible proxy route, a cooperating rejected-upgrade response, and a target without independent upstream authorization. This issue is fixed in 4.16.1 and 5.4.1. |
| Improper authorization in Windows Broadcast DVR User Service allows an authorized attacker to disclose information locally. |
| vLLM before 0.31.0 contains a cross-request mask leak in InputBatch.condense() that allows remote attackers to constrain other clients' outputs by leaving stale allowed_token_ids rows. Attackers can submit concurrent constrained generate requests, including via unauthenticated /invocations, so recycled batch slots apply their token allowlist to victims' unrestricted requests. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, the pure Python parser accepts ambiguous HTTP request framing. An unauthenticated attacker can consequently smuggle requests when an application uses AIOHTTP_NO_EXTENSIONS or otherwise runs without a standard wheel and an intermediary interprets the framing differently. This issue is fixed in version 3.14.4. |
| When a client sends a POST with Expect: 100-continue and the origin answers before reading the body, Apache Traffic Server parses the unread body left on the client connection as the next request. An attacker behind a front-end proxy that shares connections to Traffic Server can use this to smuggle requests past the front end and desynchronize responses for other users.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server allows request smuggling via HEAD requests that carry Content-Length or Transfer-Encoding.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Response body and chunk parsing would handle non-hex or negative integers incorrectly which could result in misinterpreting HTTP response contents. |
