| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix BPF token permission checks
Avoid multiple lookups of the bpffs creator SID using the token's file
descriptor when the same information can be found via the resolved
path/dentry (in selinux_bpf_token_create()) or the token itself (in
selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does
this simplify the code, it avoids potential TOCTOU issues if the user
changes the token file descriptor passed into the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
namei: don't reveal overmounted entries in refwalk
In rcuwalk the dentry is validated before it is accepted. step_into()
step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock.
An entry that gets unlinked in between causes the lookup to retry and
miss.
A refwalk doesn't do this. lookup_fast() takes a reference on the hashed
dentry and simply accepts it. So an unlink that happens after the
reference was taken isn't seen by refwalk. That's fine for a simple
file. We just happened to open it before it was unlinked, no problem.
For a mountpoint and specifically a locked mountpoint it very much
isn't. The unlink detaches all mounts and then removes the name. Any
refwalk that hasn't traversed the mounts yet simply reveals the
underlying entry. It's a very narrow window but it can be hit:
reads of a covered file in 60 s, 3 walkers, ~15000 unlinks
no widening 27
that step + 200 us 3741
See the appended patch for a more reliable reproducer.
So check the entry after step_into(). unlink(), rmdir() and rename()
mark the dentry with dont_mount() before they detach the mounts and
remove the dentry.
So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the
time its mounts were looked at is a name that was unlinked under the
refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and
it is set before they are detached by detach_mounts(). A refwalk that
missed the mounts will see DCACHE_CANT_MOUNT.
Plain d_unlinked() is fine. A rename takes the dentry off its hash chain
but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename
over the dentry unhash it. The only move that flips IS_ROOT splices in a
disconnected alias. That doesn't have DCACHE_CANT_MOUNT set.
Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately
land on an unhashed directory. A refwalk that crossed onto a mount has
path.mnt different from nd->path.mnt. A dentry that a filesystem dropped
on its own (d_invalidate(), d_drop()) doesn't have the flag set and is
treated as before.
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against walkers that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 while there is none */
static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe
---truncated--- |
| Time-of-check time-of-use (toctou) race condition in Reliable Multicast Transport Driver (RMCAST) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
memstick_check() never returns and memstick_remove_host() blocks in
flush_workqueue():
INFO: task kworker/u10:3:65 blocked for more than 20 seconds.
Workqueue: kmemstick memstick_check
__wait_for_common
memstick_check
INFO: task kworker/1:1:33 blocked for more than 20 seconds.
Workqueue: usb_hub_wq hub_event
__flush_workqueue
memstick_remove_host
rtsx_usb_ms_drv_remove
Never drop a request. rtsx_usb_ms_request() always schedules handle_req,
and handle_req fails requests with -ENOMEDIUM once eject is set, without
touching the device. drv_remove flushes handle_req instead of cancelling
it, and cancels it only after memstick_remove_host(), when no new
request can arrive, so it cannot run on a freed host.
The host_mutex drain in drv_remove is removed: handle_req always leaves
host->req NULL when it finishes, so the drain never had anything to do,
and it would now race with handle_req. |
| Time-of-check time-of-use (toctou) race condition in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (TOCTOU) race condition vulnerability in Apache Tomcat when creating unix domain sockets for the APR/Native connector allows an unauthorised local user to access the unix domain socket. The fix for CVE-2026-65183 only addressed the NIO connector. It did not address the same issue in the APR/Native connector.
This issue affects Apache Tomcat: from 9.0.47 through 9.0.122.
Users are recommended to upgrade to version 9.0.123, which fixes the issue. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.2, an attacker overbooks an agent, placing multiple appointments into a single time slot that the system is designed to keep exclusive. The number of overlapping appointments equals the number of concurrent requests, and one booking token is enough because the token is consumed after the insert. This results in the integrity of the booking-calendar breaking and availability being denied to other clients. This issue has been patched in version 2.2.2. |
| PraisonAI is a multi-agent teams system. From version 4.5.126 to before version 4.6.59, PraisonAI's Async Jobs API validates webhook_url when a job request is parsed and again when the internal Job object is constructed. That validation blocks direct loopback/private targets, but it is not bound to the later network request. When a job completes, _send_webhook() passes the original hostname to httpx.AsyncClient.post() with no send-time validation, IP pinning, or guarded transport. An attacker-controlled hostname can therefore resolve to a public IP during Pydantic validation and later resolve to loopback/private/cloud-metadata infrastructure during webhook delivery. This bypasses the intended SSRF guard in current supported releases. This appears to be an incomplete fix / patch bypass for GHSA-8frj-8q3m-xhgm. This issue has been patched in version 4.6.59. |
| Time-of-check time-of-use (toctou) race condition in Windows SmartScreen allows an authorized attacker to disclose information locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Setup Files Cleanup allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Setup Files Cleanup allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Broadcast DVR User Service allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to bypass a security feature locally. |
| filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftReadWriteLock and AsyncSoftReadWriteLock cache a successful check of the <path>.rw lock tree and resolve its names again during later record operations, allowing another local user who can replace that tree after the first acquisition to redirect lock-record writes into directories writable by the lock user. This issue is fixed in version 4.2.1. |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can break a stale marker after an attacker frees its own marker following the stale read, an honest contender creates a live successor on the reused inode, and the successor's modification time is not newer than the saved observation, causing the live marker to be removed and two holders to be admitted. This issue is fixed in version 4.2.1. |
| filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock versions from 4.1.0 can reuse a stale observation when an attacker pre-dates and removes its own marker, at least two lock-user processes are waiting, coarse or matching modification times preserve the observation, and an honest contender creates a fresh marker on the reused inode, causing that live marker to be removed as stale. This issue is fixed in version 4.2.1. |
| filelock is a platform-independent file lock for Python. Prior to 4.2.1, UnixFileLock can truncate a regular file renamed onto the lock path when another local user has actual rename permission, or hard-linked there under a permissive hard-link policy; when an explicit mode is requested, affected versions from 3.10.2 can also change that file's mode. This issue is fixed in version 4.2.1. |
| Use after free in Windows Kernel-Mode Drivers allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
