| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: piix4: Fix adapter not be removed in piix4_remove()
In piix4_probe(), the piix4 adapter will be registered in:
piix4_probe()
piix4_add_adapters_sb800() / piix4_add_adapter()
i2c_add_adapter()
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
Triggered by: rmmod i2c_piix4 && modprobe max31730
BUG: unable to handle page fault for address: ffffffffc053d860
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3752 Comm: modprobe Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core
RSP: 0018:ffff888107477710 EFLAGS: 00000246
...
<TASK>
i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core
__process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core
bus_for_each_dev (drivers/base/bus.c:301)
i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core
i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
</TASK>
---[ end trace 0000000000000000 ]---
Fix this problem by correctly set piix4_adapter_count as 1 for the
single adapter so it can be normally removed. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: avoid kprobe recursion
The cortex_a76_erratum_1463225_debug_handler() function is called when
handling debug exceptions (and synchronous exceptions from BRK
instructions), and so is called when a probed function executes. If the
compiler does not inline cortex_a76_erratum_1463225_debug_handler(), it
can be probed.
If cortex_a76_erratum_1463225_debug_handler() is probed, any debug
exception or software breakpoint exception will result in recursive
exceptions leading to a stack overflow. This can be triggered with the
ftrace multiple_probes selftest, and as per the example splat below.
This is a regression caused by commit:
6459b8469753e9fe ("arm64: entry: consolidate Cortex-A76 erratum 1463225 workaround")
... which removed the NOKPROBE_SYMBOL() annotation associated with the
function.
My intent was that cortex_a76_erratum_1463225_debug_handler() would be
inlined into its caller, el1_dbg(), which is marked noinstr and cannot
be probed. Mark cortex_a76_erratum_1463225_debug_handler() as
__always_inline to ensure this.
Example splat prior to this patch (with recursive entries elided):
| # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events
| # echo p do_el0_svc >> /sys/kernel/debug/tracing/kprobe_events
| # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
| Insufficient stack space to handle exception!
| ESR: 0x0000000096000047 -- DABT (current EL)
| FAR: 0xffff800009cefff0
| Task stack: [0xffff800009cf0000..0xffff800009cf4000]
| IRQ stack: [0xffff800008000000..0xffff800008004000]
| Overflow stack: [0xffff00007fbc00f0..0xffff00007fbc10f0]
| CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2
| Hardware name: linux,dummy-virt (DT)
| pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : arm64_enter_el1_dbg+0x4/0x20
| lr : el1_dbg+0x24/0x5c
| sp : ffff800009cf0000
| x29: ffff800009cf0000 x28: ffff000002c74740 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 00000000604003c5 x22: ffff80000801745c x21: 0000aaaac95ac068
| x20: 00000000f2000004 x19: ffff800009cf0040 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000010 x10: ffff800008c87190 x9 : ffff800008ca00d0
| x8 : 000000000000003c x7 : 0000000000000000 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000043a4
| x2 : 00000000f2000004 x1 : 00000000f2000004 x0 : ffff800009cf0040
| Kernel panic - not syncing: kernel stack overflow
| CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0xe4/0x104
| show_stack+0x18/0x4c
| dump_stack_lvl+0x64/0x7c
| dump_stack+0x18/0x38
| panic+0x14c/0x338
| test_taint+0x0/0x2c
| panic_bad_stack+0x104/0x118
| handle_bad_stack+0x34/0x48
| __bad_stack+0x78/0x7c
| arm64_enter_el1_dbg+0x4/0x20
| el1h_64_sync_handler+0x40/0x98
| el1h_64_sync+0x64/0x68
| cortex_a76_erratum_1463225_debug_handler+0x0/0x34
...
| el1h_64_sync_handler+0x40/0x98
| el1h_64_sync+0x64/0x68
| cortex_a76_erratum_1463225_debug_handler+0x0/0x34
...
| el1h_64_sync_handler+0x40/0x98
| el1h_64_sync+0x64/0x68
| cortex_a76_erratum_1463225_debug_handler+0x0/0x34
| el1h_64_sync_handler+0x40/0x98
| el1h_64_sync+0x64/0x68
| do_el0_svc+0x0/0x28
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x18c/0x190
| Kernel Offset: disabled
| CPU features: 0x0080,00005021,19001080
| Memory Limit: none
| ---[ end Kernel panic - not syncing: kernel stack overflow ]---
With this patch, cortex_a76_erratum_1463225_debug_handler() is inlined
into el1_dbg(), and el1_dbg() cannot be probed:
| # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events
| sh: write error: No such file or directory
| # grep -w cortex_a76_errat
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
cap_task_prctl+0x561/0x6f0
security_task_prctl+0x5a/0xb0
__x64_sys_prctl+0x61/0x8f0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network
When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved
remained uninitialized, resulting in a 1-byte infoleak:
BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841
__netdev_start_xmit ./include/linux/netdevice.h:4841
netdev_start_xmit ./include/linux/netdevice.h:4857
xmit_one net/core/dev.c:3590
dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606
__dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256
dev_queue_xmit ./include/linux/netdevice.h:3009
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307
__netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325
netlink_deliver_tap net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1263
netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272
netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360
nlmsg_unicast ./include/net/netlink.h:1061
rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758
ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628
rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082
...
Uninit was created at:
slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742
slab_alloc_node mm/slub.c:3398
__kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437
__do_kmalloc_node mm/slab_common.c:954
__kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975
kmalloc_reserve net/core/skbuff.c:437
__alloc_skb+0x27a/0xab0 net/core/skbuff.c:509
alloc_skb ./include/linux/skbuff.h:1267
nlmsg_new ./include/net/netlink.h:964
ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608
rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082
netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540
rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319
netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345
netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921
...
This patch ensures that the reserved field is always initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: use after free in drbd_create_device()
The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix wild-memory-access in register_synth_event()
In register_synth_event(), if set_synth_event_print_fmt() failed, then
both trace_remove_event_call() and unregister_trace_event() will be
called, which means the trace_event_call will call
__unregister_trace_event() twice. As the result, the second unregister
will causes the wild-memory-access.
register_synth_event
set_synth_event_print_fmt failed
trace_remove_event_call
event_remove
if call->event.funcs then
__unregister_trace_event (first call)
unregister_trace_event
__unregister_trace_event (second call)
Fix the bug by avoiding to call the second __unregister_trace_event() by
checking if the first one is called.
general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI
KASAN: maybe wild-memory-access in range
[0xdead000000000120-0xdead000000000127]
CPU: 0 PID: 3807 Comm: modprobe Not tainted
6.1.0-rc1-00186-g76f33a7eedb4 #299
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:unregister_trace_event+0x6e/0x280
Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48
b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02
00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b
RSP: 0018:ffff88810413f370 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000
RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20
RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481
R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122
R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028
FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__create_synth_event+0x1e37/0x1eb0
create_or_delete_synth_event+0x110/0x250
synth_event_run_command+0x2f/0x110
test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test]
synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test]
do_one_initcall+0xdb/0x480
do_init_module+0x1cf/0x680
load_module+0x6a50/0x70a0
__do_sys_finit_module+0x12f/0x1c0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: fix xdp_rxq_info bug after suspend/resume
The following sequence currently causes a driver bug warning
when using virtio_net:
# ip link set eth0 up
# echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
<resume>
# ip link set eth0 down
Missing register, driver bug
WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
Call trace:
xdp_rxq_info_unreg+0x58/0x60
virtnet_close+0x58/0xac
__dev_close_many+0xac/0x140
__dev_change_flags+0xd8/0x210
dev_change_flags+0x24/0x64
do_setlink+0x230/0xdd0
...
This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().
Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.
Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: Fix boundary conditions in interpolation
The functions power_supply_temp2resist_simple and power_supply_ocv2cap_simple
handle boundary conditions incorrectly.
The change was introduced in a4585ba2050f460f749bbaf2b67bd56c41e30283
("power: supply: core: Use library interpolation").
There are two issues: First, the lines "high = i - 1" and "high = i" in ocv2cap
have the wrong order compared to temp2resist. As a consequence, ocv2cap
sets high=-1 if ocv>table[0].ocv, which causes an out-of-bounds read.
Second, the logic of temp2resist is also not correct.
Consider the case table[] = {{20, 100}, {10, 80}, {0, 60}}.
For temp=5, we expect a resistance of 70% by interpolation.
However, temp2resist sets high=low=2 and returns 60. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
For some sev ioctl interfaces, the length parameter that is passed maybe
less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data
that PSP firmware returns. In this case, kmalloc will allocate memory
that is the size of the input rather than the size of the data.
Since PSP firmware doesn't fully overwrite the allocated buffer, these
sev ioctl interface may return uninitialized kernel slab memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload
It is possible to craft a topology where sof_get_control_data() would do
out of bounds access because it expects that it is only called when the
payload is bytes type.
Confusingly it also handles other types of controls, but the payload
parsing implementation is only valid for bytes.
Fix the code to count the non bytes controls and instead of storing a
pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
store the pointer to the data itself and add a new member to save the size
of the data.
In case of non bytes controls we store the pointer to the chanv itself,
which is just an array of values at the end.
In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
against NULL since it is incorrect and invalid in this context.
The data is pointing to the end of cdata struct, so it should never be
null. |
| In the Linux kernel, the following vulnerability has been resolved:
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to
ensure that it is within the bitmap.
drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept()
error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()' |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix [e_shstrndx].sh_size=0 OOB access
It is trivial to craft a module to trigger OOB access in this line:
if (info->secstrings[strhdr->sh_size - 1] != '\0') {
BUG: unable to handle page fault for address: ffffc90000aa0fff
PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:load_module+0x19b/0x2391
[rebased patch onto modules-next] |
| Other issue in the SVG component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
| Apache Kafka Connect contains an authentication bypass vulnerability affecting the admin REST API when admin.listeners is configured with a separate listener from the main listeners property.
When operators isolate the admin REST API by explicitly configuring the "admin.listeners" property, REST extensions specified via rest.extension.classes (such as BasicAuthSecurityRestExtension) are not registered or applied to the admin resource configuration.
While the primary REST API listener (configured via listeners) enforces configured authentication and authorization filters, endpoints mounted under the separate admin listener (/admin/loggers) fail to inherit or instantiate these extension filters. As a result, the admin logger endpoint accepts unauthenticated read and write requests even when security extensions are active on the main listener.
Impact:
An unauthenticated attacker with network access to the admin listener can:
1. Read the complete set of logger names and levels, disclosing loaded class names and which security extensions are in use.
2. Write logger levels, including with scope=cluster which propagates the change to all workers in the Connect cluster. This can be used to suppress
logging (setting root to OFF) or generate excessive log output (setting root to TRACE), potentially impacting availability and observability.
Mitigation:
Users who cannot upgrade immediately can remove the admin.listeners configuration (or leave it unset). When unset, admin resources share the regular listener and inherit its security extensions.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0, we make sure the REST extensions specified via "rest.extension.classes" will also apply to "admin.listeners". |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to 7.15.2 and 8.10.2, the Upgrade Wizard commit flow trusts the hidden zip_to_dir parameter, while clean_path() does not reject traversal sequences. An authenticated administrator can copy extracted package files outside the intended destination, overwrite application or configuration files, place executable PHP under the web root, or cause denial of service. This issue is fixed in versions 7.15.2 and 8.10.2. |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to 7.15.2 and 8.10.2, the Project module interpolates the authenticated caller's duplicateId POST parameter directly into a SQL query without sanitization, quoting, or parameterization. An authenticated attacker can alter query structure and disclose sensitive database information. This issue is fixed in versions 7.15.2 and 8.10.2. |
| In multiple locations, there is a possible way to reveal images across users due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. |
| Authorizer before 2.4.2 contains a password reset poisoning vulnerability that allows unauthenticated attackers to control emailed link hosts by supplying x-authorizer-url gRPC metadata. Attackers can send this metadata to the gRPC port or a Grpc-Metadata-X-Authorizer-Url header through the REST gateway to capture reset or magic-link tokens and take over accounts. |
