| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| .NET Denial of Service Vulnerability |
| Windows Lightweight Directory Access Protocol (LDAP) Denial of Service Vulnerability |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. |
| NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 have a command execution vulnerability due to unsafe use of `shell=True` with commands that rely on executable resolution through the `PATH` environment variable. An attacker controlling the execution environment can place malicious executables such as sudo earlier in the `PATH`, resulting in execution of attacker-controlled code. Version 2.0.0 fixes the issue. |
| The WP Hotel Booking WordPress plugin before 2.3.3 does not ensure that room quantities and the resulting order total are non-negative when placing a booking, and relies on client-controlled cart data, allowing unauthenticated users to create confirmed reservations for free or at an arbitrarily reduced price. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger OOB access and kernel null pointer dereference in an error path.
Null pointer dereference occurs in an error path of a function running in kernel thread of execution leading to kernel exceptions, platform instability and denial of service. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, manipulating user-supplied input incorporated into Antlers templates could result in the loss of content and assets, on sites whose templates pass untrusted input into affected areas, and exploitation did not require authentication. This issue is fixed in versions 5.74.1 and 6.24.0. |
| The WPC Name Your Price for WooCommerce WordPress plugin before 2.2.5 does not enforce its server-side price allowlist for products configured in "Select" price mode, allowing an unauthenticated visitor to add such a product to the cart at an arbitrary value below the merchant-defined allowed prices and commit a real order at that price (revenue loss / underpriced orders). This is a distinct, unfixed vector from CVE-2025-12115, whose 2.2.0 fix only addressed applying a custom price to products where Name Your Price is disabled and left the Select-mode allowlist unenforced through 2.2.4. |
| The CoCart WordPress plugin before 4.9.0 does not validate a user-supplied price value against the actual product price when items are added to the cart through one of its public REST API endpoints, allowing unauthenticated users to set arbitrary product prices and complete WooCommerce orders at manipulated totals. |
| The Event Booking Manager for WooCommerce (Pro) WordPress plugin before 5.0.3 does not validate the ticket price on the server during its native (non-WooCommerce) checkout, trusting the per-ticket price supplied by the client instead of re-deriving the event's configured price. This allows unauthenticated users to book paid event tickets for free, obtaining completed bookings and valid tickets at no cost. |
| Authentication bypass by assumed-immutable data in ASP.NET Core allows an authorized attacker to elevate privileges over a network. |
| Null pointer dereference in Windows SMB Server allows an authorized attacker to deny service over a network. |
| NULL pointer dereference in H5Pget_fill_value in HDF5 before 2.3.0 allows attackers to cause a denial of service via a dataset whose version 1 or 2 fill value message has the "defined" flag set together with a negative size field, which is not normalized to the library's "undefined" sentinel and reaches H5T_path_find with a NULL datatype. |
| Modification of assumed-immutable data (maid) in Azure Active Directory allows an authorized attacker to elevate privileges over a network. |
| In open62541 v1.5.5, the server-side AddReferences implementation contains an incomplete validation flaw for non-local ExpandedNodeId targets. A remote attacker can send a crafted AddReferencesRequest with an empty targetServerUri and a non-zero targetNodeId.serverIndex, causing the target node pointer to remain NULL while execution continues. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: spear: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Unconditionally sfence.vma for spurious fault
Svvptc does not guarantee that it's safe to just return here. Since we
have already cleared our bit, if, theoretically, the bounded timeframe
for the accessed page to become valid still hasn't happened after sret,
we could fault again and actually crash.
Hopefully, these spurious faults should be rare enough that this is an
acceptable slowdown. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: initialize reset_work at allocation time
ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on
ffs->reset_work when a functionfs instance is unmounted:
ffs_data_reset(ffs);
cancel_work_sync(&ffs->reset_work);
However ffs->reset_work is only ever initialized via INIT_WORK() in
ffs_func_set_alt() and ffs_func_disable(), and only on the
FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed()
when the instance is mounted with the "no_disconnect" option, so for the
common case (no "no_disconnect", or mounted and unmounted without ever
being deactivated) reset_work is never initialized.
ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not
initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch
it either, so reset_work.func is left NULL. cancel_work_sync() on such a
work then trips the WARN_ON(!work->func) guard in __flush_work():
WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount
Call trace:
__flush_work
cancel_work_sync
ffs_fs_kill_sb [usb_f_fs]
deactivate_locked_super
deactivate_super
cleanup_mnt
__cleanup_mnt
task_work_run
exit_to_user_mode_loop
el0_svc
On older kernels cancel_work_sync() on a zero-initialized work struct was
a silent no-op, which hid the missing initialization.
Initialize reset_work once in ffs_data_new() so it is always valid for
the lifetime of the ffs_data, and drop the now-redundant INIT_WORK()
calls from the two deactivation paths. |
| IBM WebSphere Application Server 8.5, and 9.0 and IBM WebSphere Application Server - Liberty Continuous delivery has a flaw in the ORB component in IBM SDK, Java Technology Edition, may allow a malicious IIOP server to induce loading and instantation of arbitrary classes. |
| OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions prior to 3.6.6 and 4.0.0-rc1 contain a denial of service vulnerability in the SDP bandwidth-line parsing logic. A SIP request with Content-Type: application/sdp and a malformed session-level SDP bandwidth line missing the required colon delimiter can corrupt parsed SDP bandwidth metadata. When a route or module subsequently clones the corrupted SDP state, as occurs with dialog and QoS processing, the OpenSIPS worker process crashes. An unauthenticated remote attacker can therefore trigger a crash in any configuration whose routing script parses attacker-controlled SDP and applies dialog/QoS processing. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1. |
