| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The LDAP name service (nsd) in IRIX 6.5.19 and earlier does not properly verify if the USERPASSWORD attribute has been provided by an LDAP server, which could allow attackers to log in without a password. |
| An issue was discovered in bluetoothd in BlueZ through 5.48. The vulnerability lies in the handling of a SVC_ATTR_REQ by the SDP implementation. By crafting a malicious CSTATE, it is possible to trick the server into returning more bytes than the buffer actually holds, resulting in leaking arbitrary heap data. The root cause can be found in the function service_attr_req of sdpd-request.c. The server does not check whether the CSTATE data is the same in consecutive requests, and instead simply trusts that it is the same. |
| An issue was discovered in pip (all versions) because it installs the version with the highest version number, even if the user had intended to obtain a private package from a private index. This only affects use of the --extra-index-url option, and exploitation requires that the package does not already exist in the public index (and thus the attacker can put the package there with an arbitrary version number). NOTE: it has been reported that this is intended functionality and the user is responsible for using --extra-index-url securely |
| The The Plus Addons for Elementor – Addons for Elementor, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.4.7. This is due to the plugin decrypting and trusting attacker-controlled email_data in an unauthenticated AJAX handler without cryptographic authenticity guarantees. This makes it possible for unauthenticated attackers to tamper with form email routing and redirection values to trigger unauthorized email relay and attacker-controlled redirection via the 'email_data' parameter. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| Same-origin policy bypass in the Networking: JAR component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| Same-origin policy bypass in the CSS Parsing and Computation component. This vulnerability was fixed in Firefox 148.0.2. |
| MCP Java SDK is the official Java SDK for Model Context Protocol servers and clients. Prior to 1.0.0, the java-sdk contains a DNS rebinding vulnerability. This vulnerability allows an attacker to access a locally or network-private java-sdk MCP server via a victims browser that is either local, or network adjacent. This allows an attacker to make any tool call to the server as if they were a locally running MCP connected AI agent. This vulnerability is fixed in 1.0.0. |
| Inappropriate implementation in PDF in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| Cosign provides code signing and transparency for containers and binaries. Prior to 3.0.6 and 2.6.3, cosign verify-blob-attestation may erroneously report a "Verified OK" result for attestations with malformed payloads or mismatched predicate types. For old-format bundles and detached signatures, this was due to a logic flaw in the error handling of the predicate type validation. For new-format bundles, the predicate type validation was bypassed completely. This vulnerability is fixed in 3.0.6 and 2.6.3. |
| Go ShangMi (Commercial Cryptography) Library (GMSM) is a cryptographic library that covers the Chinese commercial cryptographic public algorithms SM2/SM3/SM4/SM9/ZUC. Prior to 0.41.1, the current SM9 decryption implementation contains an infinity-point ciphertext forgery vulnerability. The root cause is that, during decryption, the elliptic-curve point C1 in the ciphertext is only deserialized and checked to be on the curve, but the implementation does not explicitly reject the point at infinity. In the current implementation, an attacker can construct C1 as the point at infinity, causing the bilinear pairing result to degenerate into the identity element in the GT group. As a result, a critical part of the key derivation input becomes a predictable constant. An attacker who only knows the target user's UID can derive the decryption key material and then forge a ciphertext that passes the integrity check. This vulnerability is fixed in 0.41.1. |
| Due to the lack of randomness in assigning Object Identifiers in the SAP NetWeaver AS JAVA IIOP service, an authenticated attacker with low privileges could predict the identifiers by conducting a brute force search. By leveraging knowledge of several identifiers generated close to the same time, the attacker could determine a desired identifier which could enable them to access limited system information. This poses a low risk to confidentiality without impacting the integrity or availability of the service. |
| RICOH Streamline NX versions 3.5.1 to 24R3 are vulnerable to tampering with operation history. If an attacker can perform a man-in-the-middle attack, they may alter the values of HTTP requests, which could result in tampering with the operation history of the product’s management tool. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| The WooCommerce POS plugin for WordPress is vulnerable to information disclosure in all versions up to, and including, 1.4.11. This is due to the plugin not properly verifying the authentication and authorization of the current user This makes it possible for authenticated attackers, with customer-level access and above, to view potentially sensitive information about other users by leveraging their order id |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
