| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/list_lru: drain before clearing xarray entry on reparent
memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live. |
| An issue was discovered in OpenStack ironic-python-agent 1.0.0 through 11.5.0. Ironic Python Agent (IPA) sometimes executes grub-install from within a chroot of the deployed partition image, leading to code execution in the case of a malicious image. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch. |
| When an IntegrationFlow uses .fluxTransform() with an asynchronous/reordering fluxFunction that emits raw payloads, concurrent requests on the same FluxMessageChannel subscription have their reply headers (replyChannel, errorChannel, correlationId, any propagated security/tenant headers) copied from whichever message was most recently consumed upstream.
Spring Integration 7.1.0
Spring Integration 7.0.0 - 7.0.5
Spring Integration 6.5.0 - 6.5.10
Spring Integration 6.4.0 - 6.4.12
Spring Integration 5.5.21 and earlier |
| This CVE ID has been rejected as a duplicate. |
| Pages belonging to largepage shared memory objects were not explicitly wired. When sendfile(2) transmitted such an object with the SF_NOCACHE flag, it freed the underlying pages after transmission even though existing mappings still referred to them.
An unprivileged local user can abuse the bug to access freed kernel memory. This can be exploited to escalate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Add a sanity check for btree node size
Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image,
during the file system mounting process, specifically while loading the
catalog, a corrupted node_size value of 1 caused the rec_off argument
passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively
large. Consequently, the function failed to return a valid value to
initialize the off variable, triggering the bug [1].
Every node starts from BTree node descriptor: struct hfs_bnode_desc.
So, the size of node cannot be lesser than that. However, technical
specification declares that: "The node size (which is expressed in bytes)
must be power of two, from 512 through 32,768, inclusive." Add a check
for btree node size base on technical specification.
[1]
BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382
hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix iommu domain lifetime race during device removal
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc()
With a list_for_each() loop, if we don't find the item we are looking for
in the list, then the loop exits with the iterator, which is "dbell" in
this loop, pointing to invalid memory.
This code uses the "found" variable to determine if we have found the
doorbell we are looking for or not. However, the problem that the "found"
variable needs to be set to false at the start of each iteration,
otherwise after the first correct doorbell, then everything is marked as
found.
Reset the "found" to false at the start of the iteration and move the
variable inside the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
This function runs within a kthread and need not necessarily finish
before system finishes boot and free_initmem() unmaps the .init.text
section. This function makes calls to SBI for probing unaligned access
speed, and if this is slow for some reason (say some debug prints were
added to SBI), the kthread can still be running at this point and result
in an instruction page fault when trying to fetch from the freed region.
[ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8
[ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000
[ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3
[ 25.661244] Oops [#1]
[ 25.662997] Modules linked in:
[ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY
[ 25.674669] Hardware name: Tenstorrent Blackhole (DT)
[ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20
[ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000
[ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30
[ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002
[ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000
[ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30
[ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0
[ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000
[ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
[ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402
[ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000
[ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c
[ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc
[ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4
[ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18
[ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc
Drop __init from its signature so that this doesn't happen. |
| An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known. |
| The native inference process that Elasticsearch uses to evaluate uploaded machine learning models accepts a model operation that computes a memory address from an offset supplied inside the model, without validating that the offset stays within the bounds of the underlying storage. A user with the privileges required to upload and deploy a trained model can craft a model that reads and writes memory outside the intended allocation. The result is heap corruption that crashes the inference process, and, with sufficient control over the heap layout, could allow arbitrary code execution in the context of that process. |
| A security flaw has been discovered in valkey-io valkey 9.1.0. The affected element is the function handleClientsBlockedOnKey of the file src/blocked.c of the component Blocked-on-keys Subsystem. The manipulation results in use after free. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit has been released to the public and may be used for attacks. The patch is identified as b2fb0e13f5b4c8c2fb63dcfc2c37a067a0d6d20b. Applying a patch is advised to resolve this issue. |
| A vulnerability was detected in open62541 up to 1.5.5. Affected by this vulnerability is the function UA_DataValue_backend_copyRange of the file plugins/historydata/ua_history_data_backend_memory.c of the component History Backend. The manipulation results in use after free. The attack can be launched remotely. The exploit is now public and may be used. The project closed the issue report, stating that this is not the official way to report a security vulnerability. |
| Uninitialized resource in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.9 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with developer-role permissions could have executed arbitrary commands in a CI context, due to the Claude agent processing configuration from a user-controlled source. |
| X.509IF protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix potential UAF in aa_replace_profiles
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference. |
| Untrusted data inclusion in PostgreSQL psql COPY may allow a server administrator to elicit execution of data lines as psql commands, via error injection. If the "COPY FROM STDIN" or "\copy FROM STDIN" command fails before the server indicates that it awaits input rows, psql processes the in-line data rows as psql commands. "COPY FROM" with a filename is unaffected. The server administrator has no inherent control over the data rows, so a complete attack requires the attacker to separately acquire control of both the server and the data rows. Alternatively, an attacker controlling data rows alone might complete an attack through a coincidental error that they don't control. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected. |