| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix hugetlb fault mutex hash calculation
In mfill_atomic_hugetlb(), linear_page_index() is used to calculate the
page index for hugetlb_fault_mutex_hash(). However, linear_page_index()
returns the index in PAGE_SIZE units, while hugetlb_fault_mutex_hash()
expects the index in huge page units. This mismatch means that different
addresses within the same huge page can produce different hash values,
leading to the use of different mutexes for the same huge page. This can
cause races between faulting threads, which can corrupt the reservation
map and trigger the BUG_ON in resv_map_release().
Fix this by introducing hugetlb_linear_page_index(), which returns the
page index in huge page granularity, and using it in place of
linear_page_index(). |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
| An Incorrect Synchronization vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker with low privileges to cause a complete Denial-of-Service (DoS) of the management plane.
When NETCONF sessions are quickly established and disconnected, a locking issue causes mgd processes to hang in an unusable state. When the maximum number of mgd processes has been reached, no new logins are possible. This leads to the inability to manage the device and requires a power-cycle to recover.
This issue can be monitored by checking for mgd processes in lockf state in the output of 'show system processes extensive':
user@host> show system processes extensive | match mgd
<pid> root 20 0 501M 4640K lockf 1 0:01 0.00% mgd
If the system still can be accessed (either via the CLI or as root, which might still be possible as last resort as this won't invoke mgd), mgd processes in this state can be killed with 'request system process terminate <PID>' from the CLI or with 'kill -9 <PID>' from the shell.
This issue affects:
Junos OS:
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2-S1,
* 24.4 versions before 24.4R1-S3, 24.4R2;
This issue does not affect Junos OS versions before 23.4R1;
Junos OS Evolved:
* 23.4 versions before 23.4R2-S5-EVO,
* 24.2 versions before 24.2R2-S1-EVO,
* 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 23.4R1-EVO; |
| A denial of service may be caused to a single peripheral device in a BLE network when multiple central
devices continuously connect and disconnect to the peripheral. A hard reset is required to recover the peripheral device. |
| In chainmaker-go (aka ChainMaker) before 2.4.0, when making frequent updates to a node's configuration file and restarting this node, concurrent writes by logger.go to a map are mishandled. Creating other logs simultaneously can lead to a read-write conflict and panic. |
| In chainmaker-go (aka ChainMaker) before 2.3.6, multiple updates to a single node's configuration can cause other normal nodes to perform concurrent read and write operations on a map, leading to a panic. |
| A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: fix WARNING after calling w1_process()
I got the following WARNING message while removing driver(ds2482):
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
exit_signals+0x6c/0x550
do_exit+0x2b4/0x17e0
kthread_exit+0x52/0x60
kthread+0x16d/0x1e0
ret_from_fork+0x1f/0x30
The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning. |
| lunary-ai/lunary is vulnerable to an authentication issue due to improper validation of email addresses during the signup process. Specifically, the server fails to treat email addresses as case insensitive, allowing the creation of multiple accounts with the same email address by varying the case of the email characters. For example, accounts for 'abc@gmail.com' and 'Abc@gmail.com' can both be created, leading to potential impersonation and confusion among users. |
| FISCO BCOS 3.11.0 has an issue with synchronization of the transaction pool that can, for example, be observed when a malicious node (that has modified the codebase to allow a large min_seal_time value) joins a blockchain network. |
| A background script invoking <code>requestFullscreen</code> and then blocking the main thread could force the browser into fullscreen mode indefinitely, resulting in potential user confusion or spoofing attacks. This vulnerability affects Firefox < 110, Thunderbird < 102.8, and Firefox ESR < 102.8. |
| lunary-ai/lunary is vulnerable to a session reuse attack, allowing a removed user to change the organization name without proper authorization. The vulnerability stems from the lack of validation to check if a user is still part of an organization before allowing them to make changes. An attacker can exploit this by using an old authorization token to send a PATCH request, modifying the organization's name even after being removed from the organization. This issue is due to incorrect synchronization and affects the orgs.patch route. |
| In lunary-ai/lunary versions <=v1.2.11, an attacker can bypass email validation by using a dot character ('.') in the email address. This allows the creation of multiple accounts with essentially the same email address (e.g., 'attacker123@gmail.com' and 'attacker.123@gmail.com'), leading to incorrect synchronization and potential security issues. |
| Incorrect Synchronization in GitHub repository polonel/trudesk prior to 1.2.3. |
| An information disclosure issue has been discovered in GitLab EE affecting all versions starting from 16.5 prior to 17.2.8, from 17.3 prior to 17.3.4, and from 17.4 prior to 17.4.1. A maintainer could obtain a Dependency Proxy password by editing a certain Dependency Proxy setting. |
