Export limit exceeded: 407919 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16116 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-111879 | 1 Perl5-dbi | 1 Dbi | 2026-10-30 | 6.5 Medium |
| DBI versions before 1.656 for Perl hang on a later open of a DBD::DBM table because a failed open_data does not release the table's lock. open_data creates the table's lock file and takes an exclusive flock on it for a CREATE, before the checks that can croak: a dbm_mldbm value that is not a module name, a failing tie, or a missing data file. The croak unwinds before the table object is blessed, so nothing releases the lock, and the meta data holding the open descriptor stays cached on the database handle. The dbm_mldbm and dbm_type values come from the DSN or the connect attributes, so a caller that chooses the serializer or the storage backend can trigger the failure. The flock has no timeout, so a later open of that table (even through a separate database handle) blocks for as long as the handle holding the stale lock lives, in the same process or any other. | ||||
| CVE-2025-38244 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when reconnecting channels Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 | ||||
| CVE-2024-58096 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2024-56641 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: initialize close_work early to avoid warning We encountered a warning that close_work was canceled before initialization. WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0 Workqueue: events smc_lgr_terminate_work [smc] RIP: 0010:__flush_work+0x19e/0x1b0 Call Trace: ? __wake_up_common+0x7a/0x190 ? work_busy+0x80/0x80 __cancel_work_timer+0xe3/0x160 smc_close_cancel_work+0x1a/0x70 [smc] smc_close_active_abort+0x207/0x360 [smc] __smc_lgr_terminate.part.38+0xc8/0x180 [smc] process_one_work+0x19e/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x117/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x22/0x30 This is because when smc_close_cancel_work is triggered, e.g. the RDMA driver is rmmod and the LGR is terminated, the conn->close_work is flushed before initialization, resulting in WARN_ON(!work->func). __smc_lgr_terminate | smc_connect_{rdma|ism} ------------------------------------------------------------- | smc_conn_create | \- smc_lgr_register_conn for conn in lgr->conns_all | \- smc_conn_kill | \- smc_close_active_abort | \- smc_close_cancel_work | \- cancel_work_sync | \- __flush_work | (close_work) | | smc_close_init | \- INIT_WORK(&close_work) So fix this by initializing close_work before establishing the connection. | ||||
| CVE-2026-99214 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Move packet RAM enable to PM runtime Audio can be triggered by the HPD handler and start up before video has been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe. vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the infoframe, however, if the video hasn't been enabled, vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes, causing the following splat: [ 201.570266] ------------[ cut here ]------------ [ 201.570293] Packet RAM has to be on to store the packet. [ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606 [...] [ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 201.758499] Call trace: [ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P) [ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4] [ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper] [ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper] [ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4] [ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper] [ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec] [ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core] [ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core] [ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core] [ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm] [ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm] [ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm] [ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm] [ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm] [ 201.846802] __arm64_sys_ioctl+0x88/0xd8 [ 201.850769] invoke_syscall+0x48/0xf4 [ 201.854470] el0_svc_common+0x80/0xd8 [ 201.858171] do_el0_svc+0x1c/0x28 [ 201.861520] el0_svc+0x3c/0xb0 [ 201.864605] el0t_64_sync_handler+0x68/0xdc [ 201.868834] el0t_64_sync+0x198/0x19c [ 201.872536] ---[ end trace 0000000000000000 ]--- Considering that Packet RAM enable is essentially a power management configuration, move its enabling/disabling to the Runtime PM hooks. Note that post_crtc_disable() still stops all infoframes, but keeps Packet RAM enabled, leaving it to be disabled by runtime suspend. | ||||
| CVE-2026-99169 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Fix mm reuse handling for FUT_OFF_MMSHARED A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) | ||||
| CVE-2026-99160 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | ||||
| CVE-2026-99158 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place. | ||||
| CVE-2026-99147 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/exec: don't immediately add prelocked obj to array of locked objs When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop. | ||||
| CVE-2026-99133 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped. | ||||
| CVE-2026-99114 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION, that is the whole of struct smb2_fs_control_info, but never assigns FileSystemControlFlags. Those four bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. ksmbd does not implement quota tracking, so report no control flags. | ||||
| CVE-2026-99082 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass. | ||||
| CVE-2026-99070 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later fills it with rt6_fill_node(). With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners. | ||||
| CVE-2026-99033 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. | ||||
| CVE-2026-99024 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc] | ||||
| CVE-2026-99007 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged. | ||||
| CVE-2026-98993 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. | ||||
| CVE-2026-98956 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: adau1372: allow sleepy powerdown GPIOs gpiod_set_value() emits a WARN when the GPIO provider indicates that it can sleep, as is typical for I2C controlled GPIO expanders. Since the powerdown GPIO is only manipulated in process context, use the _cansleep variant instead. This lets the driver use sleepy GPIOs to power off the chip. | ||||
| CVE-2026-98955 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO frame carrying a 65522..65535 byte L3 packet will be dissected with skb->len in [65536, 65549]. Compare as u32 instead. If the resulting offset cannot be represented in the u16 key_control->thoff, cap it to U16_MAX and report the dissection as failed rather than silently returning a wrong transport offset. thoff is still set on failure, as some callers (such as eth_get_headlen()) use it regardless of the return value. | ||||
| CVE-2026-98950 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() bpf_flow_dissect() sanitizes the offsets returned by the BPF program with clamp_t(u16, ..., hlen). If hlen is bigger than 65535, the upper bound is truncated before the comparison. For instance, with hlen == 65536, both nhoff and thoff are forced to zero, even if the program returned sane values. This is the same class of bug as the one fixed in commit 99bda1ecbd56 ("flow_dissector: avoid u16 truncation of skb->len when computing thoff"). That fix does not cover the BPF path, because __skb_flow_dissect() returns early when a BPF flow dissector handles the packet. struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen to U16_MAX before clamping. Found by sashiko while reviewing the commit above. | ||||