| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix underflow in ANA log bounds checks
The number of ANA groups advertised through Identify Controller sizes the
ANA log buffer. The ANA log header and group descriptors independently
supply the number of groups and namespace IDs to parse.
Both bounds checks subtract an untrusted object size from ana_log_size
before comparing the current offset. If the object is larger than the
buffer, the size_t subtraction underflows and lets the parser read beyond
ana_log_buf.
Check the current offset before the first subtraction and compare each
object size with the remaining buffer instead. This rejects inconsistent
ANA data before dereferencing a truncated group descriptor or walking an
oversized namespace ID array. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject oversized XDomain properties responses
tb_xdp_properties_request() allocates room for 45 data dwords in its
252-byte response buffer. The XDomain length field is six bits wide,
however, and a malicious peer can set it to 63. After the fixed response
fields are subtracted, the driver treats this as 48 data dwords.
Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to
allocation size") only bounds the copy against data_len. If data_len is
at least 48, memcpy() reads 192 bytes from the 180-byte res->data array,
causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478
("thunderbolt: Limit XDomain response copy to actual frame size") limits
the earlier copy but does not constrain this header-derived length.
Reject response data lengths that exceed the allocated source buffer
before copying them into the assembled property block. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: require the MAC header to be present in __vlan_insert_inner_tag()
__vlan_insert_inner_tag() only guarantees head room via skb_cow_head(),
never that mac_len bytes of MAC header are present. Its ETH_HLEN
wrappers - __vlan_insert_tag() under skb_vlan_push(), and
vlan_insert_tag() under validate_xmit_vlan() on the generic transmit
path - therefore rewrite the first 16 bytes at skb->data: a 12-byte
memmove plus two 2-byte stores at +12 and +14. No caller supplies the
bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull().
An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a
one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a
hwaccel tag; the next - clsact "action vlan push" or
bpf_skb_vlan_push() - enters the helper with skb->len still 1. The
head comes from skbuff_small_head without __GFP_ZERO, so each push
drags bytes from beyond skb->tail into the frame. After three the
one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised
slab:
0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81
`------------------------------'
only 0x5a was sent; the rest is slab, here the top 56 bits of a
linear-map address
Require the MAC header the helper rewrites to be present, so such a
frame is dropped rather than transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: drop RX packets with a short Ethernet header
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate TX_CMD response layout
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
