| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Reject a negative task index from parse_pdu_itt
A transport that implements parse_pdu_itt hands libiscsi an index taken
from the PDU, and both lookups bound it from above only:
if (i >= session->cmds_max)
i and cmds_max are both int, so a negative index passes and
session->cmds[i] is read from before the array.
be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag,
*index = (int)itt;
and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the
hardware async ring without replacing its ITT, so the value is the
target's. It also reports the session's own age rather than the one in
the tag, which leaves the age comparison in iscsi_verify_itt() with
nothing to reject.
Bound the index from below in both lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix false warning in ring_buffer_map_get_reader()
The mmap reader can warn when it catches up with a writer that is still
committing events. rb_get_reader_page() returns NULL in this case, but
ring_buffer_map_get_reader() treats that result as an error.
The initial rb_per_cpu_empty() check filters out an empty buffer, but it
does not guarantee that the next reader page has committed data. Writers
do not take reader_lock and can advance commit_page before publishing the
committed length on the new page. rb_get_reader_page() can swap to that
page, catch up with the writer and return NULL.
Handle NULL through the existing no-data exit without warning. Remove the
caller's reader_page == commit_page check as well, since the reader-page
helper already handles that case. The existing metadata update and return
path remain in place. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe()
In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any
subsequent operation fails or when the module is unloaded, the clock
reference count is never decremented via clk_put(), leading to a
resource leak.
Switch to devm_clk_get() so that the clock is automatically managed
and released. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix use-after-free bug when adding shared proxies
The GPIO lookup table can stay alive for longer than the kobject whose
name string's address we're assigning to lookup->dev_id. Fix a potential
UAF by duplicating the string. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |
| A vulnerability was identified in Termix-SSH Termix up to 2.9.2. This issue affects some unknown processing of the file /plugin-api/file-manager/transferToHost. The manipulation of the argument destPath leads to path traversal. The attack may be initiated remotely. The exploit is publicly available and might be used. The shortcut was removed in the standalone File Manager plugin v1.0.0 (transfer engine now always writes over SFTP) and in core v26.10.0. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in jxxghp MoviePilot up to 3.1.2. This vulnerability affects the function WorkflowExecutor.restore_context of the file app/chain/workflow.py of the component Workflow Fork Endpoint. Executing a manipulation can lead to deserialization. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.1.3 is able to resolve this issue. This patch is called 6034dcc880c13079aeb398dbe32c346ebcd3a6d2. It is recommended to upgrade the affected component. |
| A vulnerability was found in Sanluan PublicCMS 4.x/5.x/6.x. This affects the function TradeRefundService.updateAmound of the file publiccms-parent/publiccms-trade/src/main/java/com/publiccms/logic/service/trade/TradeRefundService.java of the component publiccms-trade. Performing a manipulation of the argument refundId results in authorization bypass. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Linksys E8450 1.2.00.360516. Affected is the function strcpy of the file /www/cgi-bin/portal.cgi. Such manipulation of the argument hidden_timezone leads to stack-based buffer overflow. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in WAVLINK WN536AX6-A V260507. This impacts the function host_black of the file /protocol.csp. This manipulation of the argument mac causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure. |
| A vulnerability was found in WAVLINK WN536AX6-A V260507. This affects the function strcpy of the file /protocol.csp of the component OpenVPN Handler. The manipulation of the argument openvpn_ip results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN536AX6-A V260507. The impacted element is the function wireguard_cli_group handler of the file /protocol.csp of the component WireGuard. The manipulation of the argument group_id/group_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A flaw has been found in WAVLINK WN536AX6-A V260507. The affected element is an unknown function of the file /protocol.csp of the component openvpn_cli Handler. Executing a manipulation of the argument file_id can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in WAVLINK WN536AX6-A V260507_2.0.0. Impacted is the function sub_416d48/sub_41a7c0 of the file /bin/ioos of the component VPN Client List Handler. Performing a manipulation of the argument opt results in missing authentication. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WN536AX6-A V260507_2.0.0. This issue affects the function sub_41a1d8 of the file /bin/ioos of the component WireGuard CLI Group Handler. Such manipulation of the argument group_name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A weakness has been identified in WAVLINK WN536AX6-A V260507_2.0.0. This vulnerability affects the function sub_416760 of the file /bin/ioos of the component Web Management Interface. This manipulation of the argument group_name causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure. |
| A security flaw has been discovered in Shanghai Xi Yu Ji Zhi Technology Minimax Code 0.5.8. This affects an unknown part of the component Find Command Handler. The manipulation of the argument -exec results in os command injection. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. |
| Apache Wicket reads texts from the application's resource bundles — a localized label, a css class name — and writes some of them into the JavaScript and the markup it generates for a component. Those texts are placed inside single-quoted JavaScript string literals and inside quoted attribute values without being escaped for that context, so a text containing a quote ends the literal or the attribute, and what follows is parsed as script or as markup in the application's origin when the page loads.
A resource bundle entry is authored for the application and does not say where the framework will write it. The same key is read by the framework into element text, where Wicket escapes it, and into the contexts below, where it did not. A text containing an apostrophe, which is ordinary in several languages, is enough to break the page; a text under the influence of another party is enough to run script.
In org.apache.wicket:wicket-core, org.apache.wicket.markup.html.form.upload.MultiFileUploadField writes the org.apache.wicket.mfu.delete message into a JavaScript string literal, and org.apache.wicket.markup.html.form.Form writes the hidden-fields css class into the class attribute of the container it renders for its hidden fields; on 8.0.0 through 8.19.0 and 9.0.0 through 9.24.0 Form#appendDefaultButtonField writes the same css class into a second container. In org.apache.wicket:wicket-extensions, UploadProgressBar writes its UploadProgressBar.starting text into a JavaScript string literal, FilterForm writes the hidden-fields css class into the class attribute of its hidden input markup, and on 9.0.0 through 9.24.0 and 10.0.0 through 10.11.0 TrapFocusBehavior writes its current css class into a JavaScript string literal.
The Content-Security-Policy that Apache Wicket 9.x and 10.x send by default does not prevent the JavaScript cases: the generated script is written into a script element carrying the per-response nonce, so the injected code is part of a script the policy admits. It does prevent an inline event handler injected through the attribute cases.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
