| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN
__drm_fb_helper_initial_config_and_unlock() calls
drm_client_modeset_probe() first, which already fills in each
mode_set->mode/num_connectors for every connected output, and only
afterwards calls drm_fb_helper_single_fb_probe() to create
fb_helper->fb and wire it into those mode_sets via
drm_setup_crtcs_fb().
If drm_fb_helper_single_fb_probe() fails with anything other than
-EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function
bails out before drm_setup_crtcs_fb() runs and before setting
fb_helper->deferred_setup. The client is left with mode_sets that
have a mode and connectors but mode_set->fb == NULL, and nothing
marks this fb_helper as needing a retry.
__drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing
when fb_helper->deferred_setup is set, so a later .restore() call
(drm_lastclose() on process exit, in this report) commits the stale
mode_set through drm_client_modeset_commit() ->
drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(),
which hits WARN_ON(!set->fb).
Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe()
failure, not just -EAGAIN, so restore keeps skipping the commit until
a later hotplug event successfully re-probes and re-populates
mode_set->fb. The real error code is still returned to the caller
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: adau1372: allow sleepy powerdown GPIOs
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb->len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transport header inside the
Ethernet header.
Such skbs are not exotic:
- At the time of commit d0c081b49137 ("flow_dissector: properly cap
thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO
skbs larger than 64KB (MTU checks are skipped for GSO, and
alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0
pages on top of the linear part).
- BIG TCP now makes skbs larger than 64KB common.
- The following patch makes tun_get_user() dissect IFF_TAP frames
before eth_type_trans() pulls the Ethernet header, so a GSO frame
carrying a 65522..65535 byte L3 packet will be dissected with
skb->len in [65536, 65549].
Compare as u32 instead. If the resulting offset cannot be represented
in the u16 key_control->thoff, cap it to U16_MAX and report the
dissection as failed rather than silently returning a wrong transport
offset. thoff is still set on failure, as some callers (such as
eth_get_headlen()) use it regardless of the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect()
bpf_flow_dissect() sanitizes the offsets returned by the BPF program
with clamp_t(u16, ..., hlen).
If hlen is bigger than 65535, the upper bound is truncated before
the comparison. For instance, with hlen == 65536, both nhoff and
thoff are forced to zero, even if the program returned sane values.
This is the same class of bug as the one fixed in commit 99bda1ecbd56
("flow_dissector: avoid u16 truncation of skb->len when computing
thoff"). That fix does not cover the BPF path, because
__skb_flow_dissect() returns early when a BPF flow dissector
handles the packet.
struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen
to U16_MAX before clamping.
Found by sashiko while reviewing the commit above. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net().
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930
Call trace:
__skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P)
__skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903
skb_get_hash include/linux/skbuff.h:1663 [inline]
seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132
__seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161
seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431
seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681
seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744
lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356
dst_output include/net/dst.h:470 [inline]
ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131
iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97
udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187
tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202
tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274
tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576
tipc_enable_bearer net/tipc/bearer.c:366 [inline]
__tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048
tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057
genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the active, reduced main area.
This leads to inconsistent free section accounting during GC data
migration and can trigger unexpected allocation failures or assertion
errors when space is tight.
Fix this by calculating the number of already-free sections in the
truncated range, deducting them from free_sections upon entering
free_segment_range(), and restoring them on exit. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: fix swapped arguments in nlmsvc_match_ip()
When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip,
nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server
sockaddr as the opaque @data argument:
nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL);
The match callback is later invoked from nlm_traverse_locks() as:
match(lockhost, host);
where the first argument is the nlm_host that owns the lock, and the
second argument is the @data that was originally passed down (here the
server sockaddr). This is the convention every other match callback
relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()):
arg1 is the real nlm_host, arg2 is the caller-supplied reference value.
nlmsvc_match_ip() has had these two arguments reversed ever since the
unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd:
unlock lockd locks associated with a given server ip"):
return rpc_cmp_addr(nlm_srcaddr(host), datap);
Here @host is actually the server sockaddr, so nlm_srcaddr(host)
dereferences a struct sockaddr as a struct nlm_host and reads garbage
at the offset of h_srcaddr; meanwhile @datap is actually the lock
owner's nlm_host but is compared as a sockaddr. As a result the
comparison practically never matches and locks are not released for the
requested IP.
Swap the arguments so the lock owner's source address is compared
against the requested server address:
return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host);
[ cel: fix the misleading typedef parameter names too ] |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find()
Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising
concurrent xattr workloads (using the ea_inode mount/format option).
The deadlock occurs between the running transaction and the eviction
thread:
- Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce)
and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve
the corresponding EA inode. Since the EA inode is currently being
evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for
eviction to complete.
- Task 2 (eviction thread): Currently evicting the same EA inode in
ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which
blocks waiting for Task 1 to release the reference to the mbcache_entry.
To break this deadlock, implement a new ext4_iget() configuration flag
named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the
inode via VFS's find_inode_nowait() API.
If the inode is currently being evicted (marked with I_FREEING or
I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS
inode cache (cache miss), simply skip it (returning -ENOENT) rather than
waiting for eviction/creation to complete, breaking the ABBA cycle.
Since we return -ENOENT immediately on a cache miss, we never attempt to
allocate a new inode or call iget_locked(), completely eliminating any
TOCTOU race window.
If the returned inode is I_NEW, wait for its initialization to clear via
wait_on_new_inode(). If initialization fails and the inode is unhashed
during wait_on_new_inode() waking up (e.g., due to an I/O read error in
another thread), safely drop the reference and return -ENOENT. This
unhashed check is executed unconditionally on all cache-hit pathways to
properly handle concurrent initialization failures.
Finally, standard validation checks (including is_bad_inode,
EXT4_EA_INODE_FL, file_acl, and xattr flags) are executed as normal inside
check_igot_inode() to fully guarantee VFS-layer safety.
In ext4_xattr_inode_cache_find(), invoke ext4_iget() with the new
EXT4_IGET_NOWAIT flag to perform the non-blocking cache search. |
