| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| D-Link DI-8003 v16.07.26A1, DI-8500 v16.07.26A1; DI-8003G v17.12.21A1, DI-8200G v17.12.20A1, DI-8200 v16.07.26A1, DI-8400 v16.07.26A1, DI-8004w v16.07.26A1, DI-8100 v16.07.26A1, and DI-8100G v17.12.20A1 were discovered to contain a buffer overflow via the rd_en, rd_auth, rd_acct, http_hadmin, http_hadminpwd, rd_key, and rd_ip parameters in the radius_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| OpenAirInterface Version 2.2.0 has a Buffer Overflow vulnerability in processing UplinkNASTransport containing Authentication Response containing a NAS PDU with oversize response (For example 100 byte). The response is decoded by AMF and passed to the AUSF component for verification. AUSF crashes on receiving this oversize response. This can prohibit users from further registration and verification and can cause Denial of Services (DoS). |
| Insufficient policy enforcement in PWAs in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to install a PWA without user consent via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient data validation in Media in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform an out of bounds memory read via a crafted video file. (Chromium security severity: Low) |
| Kamailio is an open source implementation of a SIP Signaling Server. Prior to 6.0.5 and 5.8.7, an out-of-bounds read in the auth module of Kamailio (formerly OpenSER and SER) allows remote attackers to cause a denial of service (process crash) via a specially crafted SIP packet if a successful user authentication without a database backend is followed by additional user identity checks. This vulnerability is fixed in 6.0.5 and 5.8.7. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.10 before 18.8.9, 18.9 before 18.9.5, and 18.10 before 18.10.3 that could have allowed an unauthenticated user to cause denial of service due to improper input validation of JSON payloads. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.0 before 18.8.9, 18.9 before 18.9.5, and 18.10 before 18.10.3 that could have allowed an unauthenticated user to cause denial of service by sending repeated GraphQL queries. |
| owntone-server 2ca10d9 is vulnerable to Buffer Overflow due to lack of recursive checking. |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| Freeciv21 is a free open source, turn-based, empire-building strategy game. Versions prior to 3.1.1 crash with a stack overflow when receiving specially-crafted packets. A remote attacker can use this to take down any public server. A malicious server can use this to crash the game on the player's machine. Authentication is not needed and, by default, logs do not contain any useful information. All users should upgrade to Freeciv21 version 3.1.1. Running the server behind a firewall can help mitigate the issue for non-public servers. For local games, Freeciv21 restricts connections to the current user and is therefore not affected. |
| GIMP JP2 File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of JP2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28863. |
| GIMP PSP File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PSP files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28874. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Inclusion of undocumented features issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. A remote attacker may disable the LAN-side firewall function of the affected products, and open specific ports. |
| A vulnerability was found in WAVLINK QUANTUM D2G, QUANTUM D3G, WL-WN530G3A, WL-WN530HG3, WL-WN532A3 and WL-WN576K1 up to V1410_240222 and classified as critical. Affected by this issue is the function sys_login of the file /cgi-bin/login.cgi of the component HTTP POST Request Handler. The manipulation of the argument login_page leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The NtfsHandler.cpp NTFS handler in 7-Zip before 24.01 (for 7zz) contains an out-of-bounds read that allows an attacker to read beyond the intended buffer. The bytes read beyond the intended buffer are presented as a part of a filename listed in the file system image. This has security relevance in some known web-service use cases where untrusted users can upload files and have them extracted by a server-side 7-Zip process. |
| SAP NetWeaver Application Server ABAP (BIC Document) allows an authenticated attacker to craft a request that, when submitted to a BIC Document application, could cause a memory corruption error. On successful exploitation, this results in the crash of the target component. Multiple submissions can make the target completely unavailable. A similarly crafted submission can be used to perform an out-of-bounds read operation as well, revealing sensitive information that is loaded in memory at that time. There is no ability to modify any information. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| In KDE Connect before 1.33.0 on Android, malicious device IDs (sent via broadcast UDP) could cause an application crash. |
