| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in lock-upme OPMS up to 831440f37a92c1568f2e071d5233bc873a9d8b09. The impacted element is an unknown function of the file controllers/messages/message.go of the component IN Clause Handler. Performing a manipulation of the argument ids results in sql injection. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in itsourcecode Hospital Management System 1.0. The affected element is an unknown function of the file /viewdoctorconsultancycharge.php. This manipulation of the argument delid causes sql injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| Cacti's sanitize_sql_column (lib/functions.php) sanitizes user-supplied ORDER BY column names using the regex . Because this allowlist retains letters, digits, underscore, parentheses, and dot (intended to support expressions like COUNT(id) and table.column), a payload such as passes through completely unmodified. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
| The PiWeb Cancel order / Refund request for WooCommerce WordPress plugin before 1.3.4.34 does not have authorization or ownership checks when adding the contents of a previous order to the cart, allowing unauthenticated users to disclose the contents of other customers' orders, as well as to clear and repopulate a logged in user's cart via a crafted link. |
| In Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 2.1.3, the native entropy source used on Intel platforms retried the CPU entropy instructions without any bound. RDSEED and RDRAND report failure through their carry flag, and the JNI seeding routine spun re-issuing the instruction for as long as that flag stayed clear, so a persistent failure of the on-chip entropy source - whether from a hardware fault, from the underlying DRBG being exhausted by contention across many cores, or from a hypervisor that does not provide the instruction - left the calling thread looping indefinitely inside the JNI call, where it could be neither interrupted nor timed out. Any operation drawing from the native entropy source could therefore hang, denying service to the application. The retry loops are now bounded (200 attempts for RDSEED and 20 for RDRAND, twice the baselines given in Intel's Digital Random Number Generator software implementation guide), pausing between attempts and, on exhaustion, clearing any partially written buffer and throwing rather than continuing to spin. The clear is performed by an un-elidable memzero, which uses a volatile pointer and an assembly memory barrier so that a compiler cannot optimise the erase away as a dead store. Bouncy Castle for Java (bcprov) is not affected, as it has no native entropy source; the 1.0.X and 2.0.X FIPS series are not affected. |
| nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition. |
| Missing Authorization vulnerability in Drupal Config Pages allows Forceful Browsing.
This issue affects Config Pages: from 0.0.0 before 2.18.0. |
| Microsoft Message Queuing (MSMQ) Remote Code Execution Vulnerability |
| Win32k Elevation of Privilege Vulnerability |
| Windows Pragmatic General Multicast (PGM) Remote Code Execution Vulnerability |
| Microsoft Office Graphics Remote Code Execution Vulnerability |
| .NET Core and Visual Studio Denial of Service Vulnerability |
| Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.0, the iOS Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism such as iOS universal links as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue has been fixed in version 2026.5.0. |
| A vulnerability was determined in MingSoft MCMS up to 3.0.6. This affects the function ModelDataImpl.queryDiyFormData of the file /mdiy/form/data/list.do of the component ms-mdiy. Executing a manipulation of the argument formFields can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in code-projects Task Management System 1.0. Affected by this issue is some unknown functionality of the file /user/comment_count_user.php. The manipulation of the argument task_id leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in SourceCodester Photo Share Website 1.0. This affects an unknown function of the file /social/ajax.php?action=signup. Performing a manipulation of the argument email results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. |
| The PayU CommercePro Plugin WordPress plugin before 3.9.0 does not verify the payment-gateway signature before applying order modifications, allowing unauthenticated attackers to tamper with the totals, shipping and metadata of arbitrary WooCommerce orders. |
| A security flaw has been discovered in SourceCodester Simple Doctors Appointment System 1.0. This vulnerability affects unknown code of the file /admin/ajax.php?action=delete_appointment. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user.
This issue is fixed in versions 16.20.0 and 15.112.0. |
