| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Don't allow 0 for FOU_ATTR_IPPROTO.
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: fix dma_free_coherent() pointer
dma_alloc_coherent() allocates a DMA mapped buffer and stores the
addresses in XXX_unaligned fields. Those should be reused when freeing
the buffer rather than the aligned addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is
rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map
access path and triggers:
Unable to handle kernel paging request at virtual address ...
pc : __pi_memcpy_generic+0x5c/0x22c
lr : bpf_percpu_array_update+0x2dc/0x2e8
Call trace:
__pi_memcpy_generic
bpf_map_update_value
map_update_elem
__sys_bpf
Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This
rejects CPU IDs outside the valid range and CPUs absent from the
possible mask, while allowing valid sparse CPU IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) |
| An improper privilege management vulnerability [CWE-269] vulnerability in Fortinet FortiClientEMS 7.2.0 through 7.2.2, FortiClientEMS 7.0.6 through 7.0.10, FortiClientEMS 7.0.0 through 7.0.4, FortiClientEMS 6.4 all versions, FortiClientEMS 06.02 all versions, FortiClientEMS 6.2 all versions allows an Site administrator with Super Admin privileges to perform global administrative operations affecting other sites via crafted HTTP or HTTPS requests. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
__xa_store() and __xa_erase() were used without holding the proper lock,
which led to a lockdep warning due to unsafe RCU usage. This patch
replaces them with xa_store() and xa_erase(), which perform the necessary
locking internally.
=============================
WARNING: suspicious RCPU usage
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted
-----------------------------
./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/u136:0/219:
at: process_one_work+0xbe4/0x15f0
process_one_work+0x75c/0x15f0
pagefault_mr+0x9a5/0x1390 [mlx5_ib]
stack backtrace:
CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
Call Trace:
dump_stack_lvl+0xa8/0xc0
lockdep_rcu_suspicious+0x1e6/0x260
xas_create+0xb8a/0xee0
xas_store+0x73/0x14c0
__xa_store+0x13c/0x220
? xa_store_range+0x390/0x390
? spin_bug+0x1d0/0x1d0
pagefault_mr+0xcb5/0x1390 [mlx5_ib]
? _raw_spin_unlock+0x1f/0x30
mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib]
process_one_work+0x7db/0x15f0
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x57d/0xcd0
? rescuer_thread+0xc40/0xc40
kthread+0x3b3/0x800
? kthread_is_per_cpu+0xb0/0xb0
? lock_downgrade+0x680/0x680
? do_raw_spin_lock+0x12d/0x270
? spin_bug+0x1d0/0x1d0
? finish_task_switch.isra.0+0x284/0x9e0
? lockdep_hardirqs_on_prepare+0x284/0x400
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork+0x2d/0x70
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork_asm+0x11/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Allow graceful removal of framebuffer
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
