| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Finit is a fast init for Linux systems. Versions starting from 3.0-rc1 and prior to version 4.11 bundle an implementation of getty for the `tty` configuration directive that can bypass `/bin/login`, i.e., a user can log in as any user without authentication. This issue has been patched in version 4.11. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| The JobSearch WP Job Board plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 2.6.7. This is due to the plugin not properly verifying a users identity when verifying an email address through the user_account_activation function. This makes it possible for unauthenticated attackers to log in as any user, including site administrators if the users email is known. |
| Shenzhen JF6000 Cloud Media Collaboration Processing Platform firmware version V1.2.0 and software version V2.0.0 build 6245 is vulnerable to Incorrect Access Control. |
| Sliver is a command and control framework that uses a custom Wireguard netstack. In versions 1.5.43 and earlier, and in development version 1.6.0-dev, the netstack does not limit traffic between Wireguard clients. This allows clients to communicate with each other unrestrictedly, potentially enabling leaked or recovered keypairs to be used to attack operators or allowing port forwardings to be accessible from other implants. |
| CWE-284: Improper Access Control |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau versions 0.9.0 through 0.9.14 and 1.00-alpha are vulnerable to a privilege escalation issue when Entra ID group-based access restrictions are configured using group display names instead of object IDs. Starting in version 0.9.0, Himmelblau introduced support for specifying group names in the `pam_allow_groups` configuration option. However, Microsoft Entra ID permits the creation of multiple groups with the same `displayName` via the Microsoft Graph API—even by non-admin users, depending on tenant settings. As a result, a user could create a personal group with the same name as a legitimate access group (e.g., `"Allow-Linux-Login"`), add themselves to it, and be granted authentication or `sudo` rights by Himmelblau. Because affected Himmelblau versions compare group names by either `displayName` or by the immutable `objectId`, this allows bypassing access control mechanisms intended to restrict login to members of official, centrally-managed groups. This issue is fixed in Himmelblau version **0.9.15** and later. In these versions, group name matching in `pam_allow_groups` has been deprecated and removed, and only group `objectId`s (GUIDs) may be specified for secure group-based filtering. To mitigate the issue without upgrading, replace all entries in `pam_allow_groups` with the objectId of the target Entra ID group(s) and/or audit your tenant for groups with duplicate display names using the Microsoft Graph API. |
| Incorrect access control in the dynawebservice component of agorum Software GmbH Agorum core open v11.9.2 & v11.10.1 allows unauthenticated attackers to access arbitrary files on the system. |
| The web application uses a weak authentication mechanism to verify that a request is coming from an authenticated and authorized resource. |
| Incorrect access control in radar v1.0.8 allows attackers to bypass authentication and access sensitive APIs without a token. |
| Hikka, a Telegram userbot, has vulnerability affects all users on all versions of Hikka. Two scenarios are possible. 1. Web interface does not have an authenticated session: attacker can use his own Telegram account to gain RCE to the server by authorizing in the dangling web interface. 2. Web interface does have an authenticated session: due to insufficient warning in the authentication message, users were tempted to click "Allow" in the "Allow web application ops" menu. This gave an attacker access not only to remote code execution, but also to Telegram accounts of owners. Scenario number 2 is known to have been exploited in the wild. No known patches are available, but some workarounds are available. Use `--no-web` flag and do not start userbot without it; after authorizing in the web interface, close the port on the server and/or start the userbot with `--no-web` flag; and do not click "Allow" in your helper bot unless it is your explicit action that needs to be allowed. |
| NVIDIA UFM Enterprise, UFM Appliance, and UFM CyberAI contain a vulnerability where an attacker can cause an improper authentication issue by sending a malformed request through the Ethernet management interface. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, and information disclosure. |
| A vulnerability was found in Multilaser Sirius RE016 MLT1.0. It has been rated as problematic. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| mCarFix Motorists App version 2.3 (package name com.skytop.mcarfix), developed by Paniel Mwaura, contains improper access control vulnerabilities. Attackers may bypass verification to arbitrarily register accounts, and by tampering with sequential numeric IDs, gain unauthorized access to user data and groups. Successful exploitation could result in fake account creation, privacy breaches, and misuse of the platform. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| A vulnerability has been found in Fujifilm Business Innovation Apeos C3070, Apeos C5570 and Apeos C6580 up to 24.8.28 and classified as critical. This vulnerability affects unknown code of the file /home/index.html#hashHome of the component Web Interface. The manipulation leads to improper authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains that "during technical verification it is not possible to reproduce any active actions like reboots which were mentioned in the original researcher disclosure." |
| Vulnerability in Tyche softwares Product Delivery Date for WooCommerce – Lite.This issue affects Product Delivery Date for WooCommerce – Lite: from n/a through 2.7.0. |
| The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts. |
| theshit is a command-line utility that automatically detects and fixes common mistakes in shell commands. Prior to version 0.1.1, the application loads custom Python rules and configuration files from user-writable locations (e.g., `~/.config/theshit/`) without validating ownership or permissions when executed with elevated privileges. If the tool is invoked with `sudo` or otherwise runs with an effective UID of root, it continues to trust configuration files originating from the unprivileged user's environment. This allows a local attacker to inject arbitrary Python code via a malicious rule or configuration file, which is then executed with root privileges. Any system where this tool is executed with elevated privileges is affected. In environments where the tool is permitted to run via `sudo` without a password (`NOPASSWD`), a local unprivileged user can escalate privileges to root without additional interaction. The issue has been fixed in version 0.1.1. The patch introduces strict ownership and permission checks for all configuration files and custom rules. The application now enforces that rules are only loaded if they are owned by the effective user executing the tool. When executed with elevated privileges (`EUID=0`), the application refuses to load any files that are not owned by root or that are writable by non-root users. When executed as a non-root user, it similarly refuses to load rules owned by other users. This prevents both vertical and horizontal privilege escalation via execution of untrusted code. If upgrading is not possible, users should avoid executing the application with `sudo` or as the root user. As a temporary mitigation, ensure that directories containing custom rules and configuration files are owned by root and are not writable by non-root users. Administrators may also audit existing custom rules before running the tool with elevated privileges. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 7.5.2 and 8.0.2, the 3rd party authentication handling of Parse Server allows the authentication credentials of some specific authentication providers to be used across multiple Parse Server apps. For example, if a user signed up using the same authentication provider in two unrelated Parse Server apps, the credentials stored by one app can be used to authenticate the same user in the other app. Note that this only affects Parse Server apps that specifically use an affected 3rd party authentication provider for user authentication, for example by setting the Parse Server option auth to configure a Parse Server authentication adapter. The fix of this vulnerability requires to upgrade Parse Server to a version that includes the bug fix, as well as upgrade the client app to send a secure payload, which is different from the previous insecure payload. This vulnerability is fixed in 7.5.2 and 8.0.2. |
