| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NivoCart through 2.4.0 contains a destructive configuration write vulnerability in the admin password reset controller that allows unauthenticated attackers to disable password recovery by supplying an invalid code parameter. Attackers can send a GET request with a missing or incorrect code to rewrite the config_password setting to 0, disabling self-service password recovery until an administrator manually re-enables it. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
devm_clk_get_optional_enabled_with_rate() registers its cleanup action
before setting the clock rate. If setting the rate fails, it attempts to
disable and unprepare a clock that was never enabled. This issue was
spotted while reviewing "rust: clk: add devres-managed clks" [1].
Register the cleanup action only after successfully preparing and enabling
the clock.
[1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| Improper state validation in Skia in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone
dmirror_fault() is called from the dmirror_read() and dmirror_write()
retry loops after dmirror_do_read() or dmirror_do_write() finds a missing
device page table entry.
If the mirrored mm has already exited, mmget_not_zero() fails. The
current code returns 0 in that case, which tells the caller that faulting
succeeded even though no page was faulted and no device page table entry
was installed. The caller then retries the same address, hits -ENOENT
again, and can loop forever without making progress.
Return -EFAULT instead, so the ioctl fails when the mirrored mm is no
longer faultable. |
| Improper state validation in Skia in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: hd3ss3220: track VBUS enable state per consumer
regulator_is_enabled() reports the aggregate regulator state, not
whether this consumer holds an enable reference. If another consumer
enables VBUS first, the driver can skip its own regulator_enable() call
and later attempt to drop a reference it never acquired, triggering an
unbalanced regulator disable warning.
Track successful enable and disable calls locally. Keep the state
unchanged when an operation fails so a later role or ID notification
retries the operation while this consumer keeps balanced references. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readLongstr in read.go returns an empty string and a nil error when a declared AMQP longstr length exceeds 0x7FFFFFFF instead of returning ErrSyntax. The function leaves the declared field bytes unread, while readTable treats the operation as successful and continues parsing from the wrong offset. A malicious or compromised broker can provide an oversized longstr in a table field and desynchronize subsequent AMQP parsing, causing attacker-controlled trailing bytes to be interpreted as later fields or frames and disrupting connection integrity and availability. This issue is fixed in version 1.13.0. |
| Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.0 until 0.11.1, backend/open_webui/models/calendar.py stored the calendar event meta.alert_minutes value without type validation and the shared upcoming-event scheduler compared that value numerically. An authenticated user with the calendar permission could store a non-numeric alert_minutes value that raised an exception and aborted the instance-wide alert pass, suppressing all users' reminders while the event remained in the lookahead window. This issue is fixed in version 0.11.1. |
| Skipper is an HTTP router and reverse proxy for service composition. Prior to 0.27.35, the opaAuthorizeRequestWithBody filter in filters/openpolicyagent/openpolicyagent.go can allow an oversized declared Content-Length request to bypass a deny-on-presence Rego policy because ExtractHttpBodyOptionally leaves OPA with an empty parsed_body while forwarding the complete request body upstream. This incomplete remediation of CVE-2026-50197 affects deployments that authorize request-body content and exceed -open-policy-agent-max-request-body-size, which defaults to 1 MB. Policy logic that does not reject input.attributes.request.http.truncated_body can therefore fail open and permit a forbidden payload to reach the protected service, while small bodies and the previously fixed chunked-body case are evaluated normally. This issue is fixed in version 0.27.35. |
| undici's experimental WebSocketStream client crashes the whole Node.js process when a remote peer closes the TCP connection without a WebSocket close handshake. On an unclean close the internal socket-close handler calls abort on the writable stream unconditionally and discards the returned promise, but per the WHATWG Streams standard aborting a locked writable returns a promise that rejects with a TypeError. Because the application holds a writer on that writable, which is the only way to write, the rejection is never observed and Node's default unhandled-rejection behavior terminates the process. An untrusted server can therefore crash a client with a single abrupt disconnect, with no authentication and no application mistake. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Improper state validation in Safebrowsing in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| XenForo before 2.3.13 contains a signature verification logic error in the PayPal REST webhook handler that allows unauthenticated attackers to bypass payment signature validation by submitting a webhook request with an unsupported auth_algo header value. When the algorithm cannot be mapped to a supported hash function, the verification function incorrectly returns true instead of failing, causing the caller to treat the fabricated request as verified and process the payment event without a valid PayPal signature. |
| Improper state validation in Safebrowsing in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Improper state validation in Safebrowsing in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Improper state validation in Installer in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| SAP Approuter does not consistently handle certain error conditions. An attacker with low privileges could exploit this under a non-default configuration. Successful exploitation is highly complex, as it depends on conditions outside the attacker's control. This could result in a low impact on availability. There is no impact on confidentiality and integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Write ESR_EL2 for injected nested SError exceptions
kvm_inject_el2_exception() writes ESR_EL2 for synchronous exceptions
but not for SError. enter_exception64() does not write ESR_ELx for any
exception type, so the constructed syndrome is dropped. A guest L2
hypervisor taking a nested SError observes stale ESR_EL2.
This affects both kvm_inject_nested_serror() and the EASE path in
kvm_inject_nested_sea().
Write ESR_EL2 for except_type_serror, matching except_type_sync. |
