| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an input validation vulnerability in the UPnP/DLNA AVTransport SOAP service that allows a LAN-adjacent attacker to inject arbitrary URIs via the CurrentURI field of SetAVTransportURI without validating the scheme, host, or media legitimacy. Attackers can supply schemes such as http://, file:///data/misc/wifi/, rtsp://, or smb:// to have the TV fetch and render attacker-controlled content after a one-time DLNA pairing, enabling phishing pages, fake firmware prompts, and fake emergency alerts to be displayed, with subsequent commands executing silently. |
| Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains a missing authentication vulnerability in the UPnP/DLNA RenderingControl service on TCP port 38400 that allows a LAN-adjacent attacker to issue SetVolume, SetMute, and SelectPreset(FactoryDefaults) commands after a one-time DLNA pairing with no per-command authentication or session token. Attackers can send a continuous loop of unauthenticated commands to override the physical remote, change volume and mute, and reset all picture and audio calibration settings. |
| Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an unauthenticated denial-of-service vulnerability in the UPnP/DLNA AVTransport SOAP service that allows LAN-adjacent attackers to freeze the entire television software layer by sending a crafted SetAVTransportURI request on TCP port 38400. Attackers can exploit this flaw without credentials to render the device completely unresponsive to remote control or front-panel input, requiring a physical power cycle to restore functionality. |
| Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an authentication bypass vulnerability in its remote-control MQTT broker on TCP port 36669, which accepts publicly documented default credentials and an ineffective 4-digit pairing PIN with no rate limiting or lockout, allowing a brute force of the entire code space in about five seconds, while some actions require no pairing at all. A LAN-adjacent attacker can exploit this to inject key events, change volume, switch input sources, enumerate inputs, launch arbitrary installed applications, and monitor pairing activity, posing a significant risk in hotel deployments where untrusted LAN access is common. |
| Bar Assistant 6.0.0-rc1 before 6.11.0 contains an incorrect authorization vulnerability in CocktailController::copy that allows registered users to bypass source cocktail membership checks. Attackers owning a bar can POST to /api/cocktails/{id}/copy with other bars' cocktail ids to copy private recipes and images into their own bar. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-grpc grpc_server allows unauthenticated attackers to exhaust memory and crash the node via an oversized client-streaming or bidirectional-streaming request body.
The streaming read clause of 'Elixir.GRPC.Server.Adapters.Cowboy.Handler':info/3 (grpc_server/lib/grpc/server/adapters/cowboy/handler.ex) never checks the configured max_body_size. Only the unary read path enforces that cap. 'Elixir.GRPC.Server.Adapters.Cowboy':reading_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex) appends every received chunk to its buffer until a complete length-prefixed message arrives. A client can declare a very large message and send it across many small HTTP/2 DATA frames, and the server buffers all of it.
This issue affects grpc_server: from 1.0.0 before 1.0.6. |
| A weakness has been identified in nexmoe VidBee up to 1.3.13/2.0.2. The affected element is an unknown function of the file apps/desktop/src/main/local-api.ts of the component Local HTTP Service. Executing a manipulation can lead to information disclosure. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 2.2.0 is sufficient to fix this issue. This patch is called 141b8d39c1c11da4589264f814cee077df81e7f6. It is suggested to upgrade the affected component. |
| Vulnerability in the Primavera Unifier product of Oracle Construction and Engineering (component: Logging). Supported versions that are affected are 21.12.0-21.12.17, 22.12.0-22.12.15, 23.12.0-23.12.16, 24.12.0-24.12.16 and 25.12.0-25.12.9. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Primavera Unifier. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Primavera Unifier accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| An authenticated cross-site scripting (XSS) vulnerability in the /spina/embeddable.rb component of Spina CMS v2.21.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted URL. |
| A session validation vulnerability has been identified in the SonicOS management interface, which in specific conditions could potentially enable a remote unauthenticated attacker to perform unauthorized operations. |
| In JetBrains IntelliJ IDEA before 2026.3 code execution was possible via symlinks in an imported settings archive |
| SecureDrop is an open-source whistleblower submission system that media organizations can use to securely accept documents from, and communicate with anonymous sources. From 2.13.0 until 2.16.1, running the securedrop-admin install Ansible playbook with journalist alerts disabled leaves the journalist alert key filename empty, causing the copy task to transfer every file in ~/.config/securedrop-admin/, including Onion Service client authentication credentials, to the Monitor Server. An attacker must first compromise the privileged Monitor Server to obtain the credentials, and the credentials remain an additional protection layer rather than sufficient access by themselves because the Journalist Interface still requires a username, passphrase, and MFA, while SSH access still requires SSH keys. This issue is fixed in version 2.16.1. |
| fast-agent is a framework for building, running, and evaluating AI agents with Model Context Protocol support. Prior to 0.7.21, fast-agent serve uses HTTP transport bound to 0.0.0.0 on port 8000 without authentication, allowing any network client that can reach the /mcp endpoint to invoke the exposed agent tool. When the server is started with --shell, the agent can call the local execute tool implemented by tools/local_shell_executor.py, so an unauthenticated remote client can cause operating-system commands to run as the server user; without --shell, the client can still consume the operator's model and configured MCP tools. The defaults are defined in cli/commands/serve.py and mcp/server/agent_server.py, and the non-interactive server permission prompt does not prevent the described access. This issue is fixed in version 0.7.21. |
| plist.js (npm package 'plist') before 5.0.1 contains an uncontrolled resource consumption vulnerability in the binary property-list parser (parseBinary) that allows unauthenticated attackers to crash a Node.js process by exploiting unmemoized recursive resolution of shared object references for arrays and dictionaries. Attackers can craft a small binary plist (under 200 bytes) containing chained self-referencing object indices to trigger exponential (2^N) resolution calls and memory growth, causing an unrecoverable out-of-memory crash and denial of service. |
| esm.sh is a no-build content delivery network (CDN) for web development. Prior to server version 137_7, the documented web.NewHandler static file server in web/handler.go joins the URL-decoded r.URL.Path with Config.AppDir without verifying that the result remains inside the configured application directory. URL-encoded dot segments such as %2e%2e bypass the plain traversal redirect performed by Go's ServeMux, allowing an unauthenticated remote attacker to make the server open and return files outside Config.AppDir that are readable by the server process. The confirmed impact is file disclosure only, and the issue is reachable with Dev disabled. This issue is fixed in server version 137_7. |
| In decodeWapPdu of WapPushOverSms.java, there is a possible out of bounds read due to an integer overflow. This could lead to a remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In dec_vlc_read of oapv_vlc.c, there is a possible out-of-bounds read due to a heap buffer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| ChatWiki before 2.10.0 contains a missing authentication vulnerability in the GET /manage/getLibRawFileOnePage route that allows unauthenticated attackers to read other tenants' documents. Attackers can enumerate sequential admin_user_id and file id query parameters, bypassing the ownership check, to retrieve PDF-rendered pages of any tenant's knowledge-base documents. |
| mistral.rs before 0.9.5 contains a delimiter injection vulnerability in mistralrs-core that allows attackers to inject tool calls by placing delimiter strings in text the model quotes. Attackers controlling documents, web pages or tool outputs can embed tags like </tool_call> to make qwen-xml, gemma4 or reasoning parsers return extra calls to declared tools with attacker-chosen arguments. |
| Gitleaks through 8.30.1 contains an incorrect permission assignment vulnerability that allows local users to read scan reports because cmd/root.go creates the --report-path file with os.Create and default permissions. Unless --redact is passed, other local users on shared hosts or CI runners can read plaintext secrets and matching lines to obtain discovered credentials. |
