Export limit exceeded: 415364 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415364 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24473 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-20845 | 2026-04-15 | 6 Medium | ||
| A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a memory leak in the TL1 process. This vulnerability is due to TL1 not freeing memory under some conditions. An attacker could exploit this vulnerability by connecting to the device and issuing TL1 commands after being authenticated. A successful exploit could allow the attacker to cause the TL1 process to consume large amounts of memory. When the memory reaches a threshold, the Resource Monitor (Resmon) process will begin to restart or shutdown the top five consumers of memory, resulting in a denial of service (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . | ||||
| CVE-2025-59733 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset. The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels. If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2024-13089 | 2026-04-15 | 7.2 High | ||
| An OS command injection vulnerability within the update functionality may allow an authenticated administrator to execute unauthorized arbitrary OS commands. Users with administrative privileges may upload update packages to upgrade the versions of Nozomi Networks Guardian and CMC. While these updates are signed and their signatures are validated prior to installation, an improper signature validation check has been identified. This issue could potentially enable users to execute commands remotely on the appliance, thereby impacting confidentiality, integrity, and availability. | ||||
| CVE-2025-34049 | 2026-04-15 | N/A | ||
| An OS command injection vulnerability exists in the OptiLink ONT1GEW GPON router firmware version V2.1.11_X101 Build 1127.190306 and earlier. The router’s web management interface fails to properly sanitize user input in the target_addr parameter of the formTracert and formPing administrative endpoints. An authenticated attacker can inject arbitrary operating system commands, which are executed with root privileges, leading to remote code execution. Successful exploitation enables full compromise of the device. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC. | ||||
| CVE-2025-34042 | 2026-04-15 | N/A | ||
| An authenticated command injection vulnerability exists in the Beward N100 IP Camera firmware version M2.1.6.04C014 via the ServerName and TimeZone parameters in the servetest CGI page. An attacker with access to the web interface can inject arbitrary system commands into these parameters, which are unsafely embedded into backend system calls without proper input sanitization. Successful exploitation results in remote code execution with root privileges. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-02 UTC. | ||||
| CVE-2023-53948 | 1 Cat03 | 1 Lilac-reloaded | 2026-04-15 | 9.8 Critical |
| Lilac-Reloaded for Nagios 2.0.8 contains a remote code execution vulnerability in the autodiscovery feature that allows attackers to inject arbitrary commands. Attackers can exploit the lack of input filtering in the nmap_binary parameter to execute a reverse shell by sending a crafted POST request to the autodiscovery endpoint. | ||||
| CVE-2025-23294 | 1 Nvidia | 1 Webdataset | 2026-04-15 | 7.8 High |
| NVIDIA WebDataset for all platforms contains a vulnerability where an attacker could execute arbitrary code with elevated permissions. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, information disclosure, and denial of service. | ||||
| CVE-2025-6978 | 1 Arista | 1 Ng Firewall | 2026-04-15 | 7.2 High |
| Diagnostics command injection vulnerability | ||||
| CVE-2024-36355 | 1 Amd | 25 Epyc 9004 Series Processors, Epyc Embedded 9004 Series Processors, Ryzen 5000 Series Desktop Processors and 22 more | 2026-04-15 | N/A |
| Improper input validation in the SMM handler could allow an attacker with Ring0 access to write to SMRAM and modify execution flow for S3 (sleep) wake up, potentially resulting in arbitrary code execution. | ||||
| CVE-2025-27234 | 1 Zabbix | 4 Zabbix, Zabbix-agent, Zabbix-agent2 and 1 more | 2026-04-15 | N/A |
| Zabbix Agent 2 smartctl plugin does not properly sanitize smart.disk.get parameters, allowing an attacker to inject unexpected arguments into the smartctl command. In Zabbix 5.0 this allows for remote code execution. | ||||
| CVE-2025-11141 | 1 Ruijie | 1 Nbr2100g-e | 2026-04-15 | 4.7 Medium |
| A security flaw has been discovered in Ruijie NBR2100G-E up to 20250919. Affected by this issue is the function listAction of the file /itbox_pi/branch_passw.php?a=list. Performing manipulation of the argument city results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-34037 | 1 Linksys | 6 E1000, E1200, E1500 and 3 more | 2026-04-15 | N/A |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. | ||||
| CVE-2025-11148 | 1 Check-branches Project | 1 Check-branches | 2026-04-15 | 9.8 Critical |
| All versions of the package check-branches are vulnerable to Command Injection check-branches is a command-line tool that is interacted with locally, or via CI, to confirm no conflicts exist in git branches. However, the library follows these conventions which can be abused: 1. It trusts branch names as they are (plain text) 2. It spawns git commands by concatenating user input Since a branch name is potentially a user input - as users can create branches remotely via pull requests, or simply due to privileged access to a repository - it can effectively be abused to run any command. | ||||
| CVE-2025-55118 | 1 Bmc | 1 Control-m/agent | 2026-04-15 | 8.9 High |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | ||||
| CVE-2025-42971 | 2026-04-15 | 4 Medium | ||
| A memory corruption vulnerability exists in SAPCAR allowing an attacker to craft malicious SAPCAR archives. When a high privileged victim extracts this malicious archive, it gets processed by SAPCAR on their system, resulting in out-of-bounds memory read and write. This could lead to file extraction and file overwrite outside the intended directories. This vulnerability has low impact on the confidentiality, integrity and availability of the application. | ||||
| CVE-2010-20059 | 1 Ixsystems | 1 Freenas | 2026-04-15 | N/A |
| FreeNAS 0.7.2 prior to revision 5543 includes an unauthenticated command‐execution backdoor in its web interface. The exec_raw.php script exposes a cmd parameter that is passed directly to the underlying shell without sanitation. | ||||
| CVE-2025-62193 | 1 Noaa | 1 Live Access Server | 2026-04-15 | 9.8 Critical |
| Sites running NOAA PMEL Live Access Server (LAS) are vulnerable to remote code execution via specially crafted requests that include PyFerret expressions. By leveraging a SPAWN command, a remote, unauthenticated attacker can execute arbitrary OS commands. Fixed in a version of 'gov.noaa.pmel.tmap.las.filter.RequestInputFilter.java' from 2025-09-24. | ||||
| CVE-2025-10451 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| Unchecked output buffer may allowed arbitrary code execution in SMM and potentially result in SMM memory corruption. | ||||
| CVE-2024-52010 | 2026-04-15 | N/A | ||
| Zoraxy is a general purpose HTTP reverse proxy and forwarding tool. A command injection vulnerability in the Web SSH feature allows an authenticated attacker to execute arbitrary commands as root on the host. Zoraxy has a Web SSH terminal feature that allows authenticated users to connect to SSH servers from their browsers. In HandleCreateProxySession the request to create an SSH session is handled. An attacker can exploit the username variable to escape from the bash command and inject arbitrary commands into sshCommand. This is possible, because, unlike hostname and port, the username is not validated or sanitized. | ||||
| CVE-2024-36114 | 2026-04-15 | 8.6 High | ||
| Aircompressor is a library with ports of the Snappy, LZO, LZ4, and Zstandard compression algorithms to Java. All decompressor implementations of Aircompressor (LZ4, LZO, Snappy, Zstandard) can crash the JVM for certain input, and in some cases also leak the content of other memory of the Java process (which could contain sensitive information). When decompressing certain data, the decompressors try to access memory outside the bounds of the given byte arrays or byte buffers. Because Aircompressor uses the JDK class `sun.misc.Unsafe` to speed up memory access, no additional bounds checks are performed and this has similar security consequences as out-of-bounds access in C or C++, namely it can lead to non-deterministic behavior or crash the JVM. Users should update to Aircompressor 0.27 or newer where these issues have been fixed. When decompressing data from untrusted users, this can be exploited for a denial-of-service attack by crashing the JVM, or to leak other sensitive information from the Java process. There are no known workarounds for this issue. | ||||