| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A mishandled security check when creating a WebSocket in a WebWorker caused the Content Security Policy connect-src header to be ignored. This could lead to connections to restricted origins from inside WebWorkers. This vulnerability affects Firefox < 109, Firefox ESR < 102.7, and Thunderbird < 102.7. |
| When checking if the Browsing Context had been discarded in `HttpBaseChannel`, if the load group was not available then it was assumed to have already been discarded which was not always the case for private channels after the private session had ended. This vulnerability affects Firefox < 117, Firefox ESR < 115.2, and Thunderbird < 115.2. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Clear stale IIR value on instruction access rights trap
When a trap 7 (Instruction access rights) occurs, this means the CPU
couldn't execute an instruction due to missing execute permissions on
the memory region. In this case it seems the CPU didn't even fetched
the instruction from memory and thus did not store it in the cr19 (IIR)
register before calling the trap handler. So, the trap handler will find
some random old stale value in cr19.
This patch simply overwrites the stale IIR value with a constant magic
"bad food" value (0xbaadf00d), in the hope people don't start to try to
understand the various random IIR values in trap 7 dumps. |
| decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data. |
| The KMIP response parser built into mongo binaries is overly tolerant of certain malformed packets, and may parse them into invalid objects. Later reads of this object can result in read access violations. |
| Mastodon is a free, open-source social network server based on ActivityPub. In Mastodon version 4.4, support for verifiable quote posts with quote controls was added, but it is possible for an attacker to bypass these controls in Mastodon versions prior to 4.4.8 and 4.5.0-beta.2. Mastodon internally treats reblogs as statuses. Since they were not special-treated, an attacker could reblog any post, then quote their reblog, technically quoting themselves, but having the quote feature a preview of the post they did not get authorization for with all of the affordances that would be otherwise denied by the quote controls. This issue has been patched in versions 4.4.8 and 4.5.0-beta.2. |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause an improper check for unusual or exceptional conditions issue by sending extra large payloads. A successful exploit of this vulnerability may lead to denial of service. |
| python-ldap is a lightweight directory access protocol (LDAP) client API for Python. In versions prior to 3.4.5, the sanitization method `ldap.filter.escape_filter_chars` can be tricked to skip escaping of special characters when a crafted `list` or `dict` is supplied as the `assertion_value` parameter, and the non-default `escape_mode=1` is configured. The method `ldap.filter.escape_filter_chars` supports 3 different escaping modes. `escape_mode=0` (default) and `escape_mode=2` happen to raise exceptions when a `list` or `dict` object is supplied as the `assertion_value` parameter. However, `escape_mode=1` computes without performing adequate logic to ensure a fully escaped return value. If an application relies on the vulnerable method in the `python-ldap` library to escape untrusted user input, an attacker might be able to abuse the vulnerability to launch ldap injection attacks which could potentially disclose or manipulate ldap data meant to be inaccessible to them. Version 3.4.5 fixes the issue by adding a type check at the start of the `ldap.filter.escape_filter_chars` method to raise an exception when the supplied `assertion_value` parameter is not of type `str`. |
| DataHub is an open-source metadata platform. In the event a system is using Java Authentication and Authorization Service (JAAS) authentication and that system is given a configuration which contains an error, the authentication for the system will fail open and allow an attacker to login using any username and password. The reason for this is that while an error is thrown in the `authenticateJaasUser` method it is swallowed without propagating the error. As a result of this issue unauthenticated users may gain access to the system. Users are advised to upgrade. There are no known workarounds for this issue. This vulnerability was discovered and reported by the GitHub Security lab and is tracked as GHSL-2022-081. |
| WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to version 2.4.4, WAMR is susceptible to a segmentation fault in v128.store instruction. This issue has been patched in version 2.4.4. |
| Newtonsoft.Json before version 13.0.1 is affected by a mishandling of exceptional conditions vulnerability. Crafted data that is passed to the JsonConvert.DeserializeObject method may trigger a StackOverflow exception resulting in denial of service. Depending on the usage of the library, an unauthenticated and remote attacker may be able to cause the denial of service condition. |
| Improper conditions check for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow a denial of service. System software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.
|
| A vulnerability exists in the Windows sandbox where an uninitialized value in memory can be leaked to a renderer from a broker when making a call to access an otherwise unavailable file. This results in the potential leaking of information stored at that memory location. *Note: this issue only occurs on Windows. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Drupal core allows Forceful Browsing.This issue affects Drupal core: from 8.0.0 before 10.4.9, from 10.5.0 before 10.5.6, from 11.0.0 before 11.1.9, from 11.2.0 before 11.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
In KVM guests with Hyper-V hypercalls enabled, the hypercalls
HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX
allow a guest to request invalidation of portions of a virtual TLB.
For this, the hypercall parameter includes a list of GVAs that are supposed
to be invalidated.
However, when non-canonical GVAs are passed, there is currently no
filtering in place and they are eventually passed to checked invocations of
INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores
non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly
signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error():
invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000
WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482
invvpid_error+0x91/0xa0 [kvm_intel]
Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse
CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary)
RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel]
Call Trace:
vmx_flush_tlb_gva+0x320/0x490 [kvm_intel]
kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm]
Hyper-V documents that invalid GVAs (those that are beyond a partition's
GVA space) are to be ignored. While not completely clear whether this
ruling also applies to non-canonical GVAs, it is likely fine to make that
assumption, and manual testing on Azure confirms "real" Hyper-V interprets
the specification in the same way.
Skip non-canonical GVAs when processing the list of address to avoid
tripping the INVVPID failure. Alternatively, KVM could filter out "bad"
GVAs before inserting into the FIFO, but practically speaking the only
downside of pushing validation to the final processing is that doing so
is suboptimal for the guest, and no well-behaved guest will request TLB
flushes for non-canonical addresses. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host and Application (VA/SaaS deployments) store user passwords using unsalted SHA-512 hashes with a fall-back to unsalted SHA-1. The hashing is performed via PHP's `hash()` function in multiple files (server_write_requests_users.php, update_database.php, legacy/Login.php, tests/Unit/Api/IdpControllerTest.php). No per-user salt is used and the fast hash algorithms are unsuitable for password storage. An attacker who obtains the password database can recover cleartext passwords via offline dictionary or rainbow table attacks. The vulnerable code also contains logic that migrates legacy SHA-1 hashes to SHA-512 on login, further exposing users still on the old hash. This vulnerability was partially resolved, but still present within the legacy authentication platform. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application versions prior to 25.1.1413 include Windows client components (PrinterInstallerClientInterface.exe, PrinterInstallerClient.exe, PrinterInstallerClientLauncher.exe) that lack modern compile-time and runtime exploit mitigations and rely on outdated runtimes. These binaries are built as 32-bit, without Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), Control Flow Guard (CFG), or stack-protection, and they incorporate legacy technologies (Pascal/Delphi and Python 2) which are no longer commonly maintained. Several of these processes run with elevated privileges (NT AUTHORITY\SYSTEM for PrinterInstallerClient.exe and PrinterInstallerClientLauncher.exe), and the client automatically downloads and installs printer drivers. The absence of modern memory safety mitigations and the use of unmaintained runtimes substantially increase the risk that memory-corruption or other exploit primitives — for example from crafted driver content or maliciously crafted inputs — can be turned into remote or local code execution and privilege escalation to SYSTEM. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| A flaw was found in KVM. An improper check in svm_set_x2apic_msr_interception() may allow direct access to host x2apic msrs when the guest resets its apic, potentially leading to a denial of service condition. |
| smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM field. This affects the "uncommented" default configuration. The issue exists because of an incorrect return value upon failure of input validation. |
