| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Trigger.dev before 4.5.10 contains a server-side request forgery vulnerability that allows authenticated project members to bypass webhook SSRF protections by targeting the non-global 198.18.0.0/15 benchmarking range. Attackers can configure alert-channel webhooks pointing at internally routed services in this range, which isUnsafeIPv4 omits, to perform blind internal probing and limited state-changing POST requests. |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. |
| Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to version 1.37.0, the Vaultwarden icon downloader validates the initial icon host and DNS results but passes favicon URLs parsed from attacker-controlled HTML to get_page_with_referer() without applying should_block_host() to the second-stage host. This flaw bypasses the remediation for CVE-2026-47160, which covered decimal, hexadecimal, octal, and IPv4-mapped IPv6 host normalization, because the second-stage IP-literal favicon fetch does not invoke the custom DNS resolver. A remote unauthenticated attacker can provide a public page whose favicon uses an IP-literal URL, allowing the Vaultwarden server to reach loopback or private and internal addresses. The issue affects instances with internal icon downloading enabled and can expose internal responses that resemble supported images or reveal reachability through timing, status, and cache behavior. This issue is fixed in version 1.37.0. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| When a message containing an OpenPGP key attachment was displayed, Thunderbird automatically loaded the attachment's content to offer importing the key. A sender could mark the attachment as an external attachment pointing to an arbitrary URL, which Thunderbird then loaded without any user interaction, bypassing remote content blocking. On Windows, a URL pointing to an attacker-controlled network share could leak the user's NTLM credentials.
The NTLM credential leak only affects Thunderbird on Windows. On other operating systems, the issue allowed a remote request that bypassed remote content blocking. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor
scx_bypass() claims bypass dispatch when the scheduler's depth goes from
zero to one and releases it when the depth returns to zero, but propagates
only the depth to the descendants, not the claim. A descendant that starts
bypassing with its ancestor never claims, and one whose own bypass ends
under the ancestor's keeps its claim, as its depth does not return to zero.
A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its
claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next
bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that
starts under a PM suspend has no claim, so once the resume lifts the root's
bypass its tasks sit on the parent's bypass DSQs with nobody consuming them.
Claim for every descendant whose depth goes from zero to one in the
propagation and release every scheduler in the subtree whose depth returned
to zero once the tasks have moved out of the bypass DSQs. A parent that is
bypassing itself when a descendant claims consumes only its own bypass DSQs,
empty until it leaves bypass and becomes the host. |
| Roundcube Webmail 1.6.14 before 1.6.20 and 1.7.0 before 1.7.5 is affected by a server-side request forgery filter bypass. The network blocklist used by rcube_utils::is_local_url() omitted the RFC 6052 NAT64 prefix 64:ff9b::/96, the RFC 8215 local-use NAT64 prefix 64:ff9b:1::/48 and the unspecified address ::/128, so URLs such as http://[64:ff9b::7f00:1]/ passed the filter and reached loopback, link-local and cloud metadata addresses. Upstream fixed this in the commit “Fix SSRF filter (is_local_url()) bypass via NAT64 64:ff9b::/96”. |
| A flaw has been found in HarnessRouter up to 0.31.12. This impacts an unknown function of the file gateway/app.py of the component Targets Test Endpoint. Executing a manipulation of the argument base_url can lead to server-side request forgery. The attack may be performed from remote. Upgrading to version 0.31.13 will fix this issue. This patch is called 1c4b1fc1f89737dabd089ac1d1c174a57f764e28. It is suggested to upgrade the affected component. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| HomeBox is a home inventory and organization system. Prior to version 0.27.0, Homebox validates generic notifier URLs with ValidateNotifierURL before creation, update, testing, and scheduled delivery, but shoutrrr sends the request through http.DefaultClient.Do without a CheckRedirect policy that revalidates each Location target. An authenticated collection member can configure a permitted notifier host that redirects to loopback, link-local, cloud metadata, or another blocked destination, causing the follow-up request to bypass the product's SSRF policy. The flaw is reachable through POST /api/v1/notifiers/test for immediate requests and through stored notifiers during scheduled maintenance delivery. This issue is fixed in version 0.27.0. |
| systeminformation is a System and OS information library for node.js. Prior to 5.33.13, networkStats(ifaces) in lib/network.js on FreeBSD, OpenBSD, and NetBSD stores per-interface data in the plain-object _network cache and indexes it with the sanitized caller-controlled interface name. Passing proto causes the inherited Object.prototype value to be used instead of creating an own cache entry, so calcNetworkSpeed() writes rx_bytes, tx_bytes, rx_sec, tx_sec, ms, last_ms, and operstate onto Object.prototype. The polluted property names are fixed and their values come from interface statistics, but inherited-name collisions and enumerable keys can corrupt application branching, serialization, configuration merging, validation, or lookup behavior. This issue is fixed in version 5.33.13. |
| YesWiki before 4.7.0 contains a server-side request forgery vulnerability in DuplicationManager::downloadFile() that allows authenticated administrators to make arbitrary outbound requests via the files array. Attackers can POST file:// or internal URLs to /api/pages/{tag}/duplicate, storing local files, cloud metadata, or database credentials in the publicly accessible files/ directory. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a server-side request forgery. A successful exploit of this vulnerability might lead to information disclosure. |
| Joomla Extension - regularlabs.com - LFI / SSRF in Modules Anywhere 1.5.0 - 9.0.5 for Joomla - Modules Anywhere Pro lets additional attributes on a module tag replace arbitrary parameters of the selected module. This feature is enabled by default in affected versions. The overrides are applied without checking who authored the content containing the tag. The security effect depends on how the selected module consumes the replaced parameter. Joomla's core Feed module provides a concrete affected path: its rssurl parameter is opened by the server and accepts local file: URLs as well as network URLs. |
| Bulwark Webmail is a self-hosted webmail client for Stalwart Mail Server. Prior to 1.9.2, the unauthenticated POST /api/fetch-ical endpoint validates a caller-supplied hostname with one DNS lookup and then passes the URL to fetch, which performs a separate lookup for the socket connection. An attacker controlling authoritative DNS can return a public address during validation and then rebind the hostname to a loopback, private, link-local, or cloud metadata address for the connection, causing the server to return up to 10 MB of an internal HTTP or HTTPS response. The same check-then-fetch pattern also existed in authenticated JMAP login and TOTP token-exchange flows. This issue is fixed in version 1.9.2. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a server-side request forgery. A successful exploit of this vulnerability might lead to information disclosure and data tampering. |
| A vulnerability was found in Typecho up to 1.3.0. This vulnerability affects the function Service::sendPingHandle of the file var/Widget/Service.php of the component Ping Back Service Endpoint. The manipulation of the argument X-Pingback/link results in server-side request forgery. The attack may be launched remotely. The exploit has been made public and could be used. Upgrading to version 1.3.1-rc is able to resolve this issue. The patch is identified as 96ccfdda4fc1e66ca04a003bf0c71d25864e6a0b. Upgrading the affected component is advised. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.7, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Server-Side Request Forgery (SSRF) vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Server-side request forgery. |
