| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic to or through a dataplane interface. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.
Cloud NGFW and Panorama are not affected by this vulnerability. |
| An improper input handling vulnerability in the GlobalProtect™ gateway of Palo Alto Networks PAN-OS software enables an authenticated user to establish a GlobalProtect session using the identity of another user.
Cloud NGFW and Panorama are not affected by this vulnerability. |
| Nullsoft Scriptable Install System (NSIS) before 3.11 on Windows allows local users to escalate privileges to SYSTEM during an installation, because the temporary plugins directory is created under %WINDIR%\temp and unprivileged users can place a crafted executable file by winning a race condition. This occurs because EW_CREATEDIR does not always set the CreateRestrictedDirectory error flag. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Fix race between SR-IOV enable/disable and hotplug
Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback. |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated). |
| Improper state validation in Autofill AI in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| Improper state validation in DevTools in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Check for Unusual or Exceptional Conditions vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information tampering and Protection mechanism bypass. |
| @fastify/jwt is a JSON Web Token plugin for the Fastify web framework. In versions before 10.2.3, a time span passed to expiresIn, notBefore, or maxAge that the plugin's parser cannot read, such as a compound span, a month unit, an ISO 8601 duration, a decimal comma, or a value with surrounding whitespace, is silently dropped instead of refused. On the signing path this produces a token with no expiration claim that never expires, and on the verification path a configured maxAge stops being enforced, so a token that should be rejected for age is accepted. The issue is fixed in @fastify/jwt 10.2.3, and users should upgrade to 10.2.3 or later. As a workaround, pass these options as a number of seconds, or verify that any time-span string parses to a finite value before relying on it. |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate null entries in Microsoft Graph webhook notification payloads, which allows an unauthenticated attacker to crash the Microsoft Calendar plugin process and deny calendar integration service to all users on the instance via a crafted {{POST}} request to the public webhook endpoint.. Mattermost Advisory ID: MMSA-2026-00693 |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate the type of `fields.properties` on block creation which allows an authenticated user with editor access to a board to crash the Boards plugin worker and trigger a denial of service via a child block whose `fields.properties` is a non-object value. Mattermost Advisory ID: MMSA-2026-00710 |
| Zebra before 6.3.0 contains an improper exceptional condition check in ChainSync::obtain_tips that discards valid one-hash FindBlocks responses, falsely reporting close-to-tip status. Peers returning only the next block hash cause a zero-length sync sample, making the /ready endpoint return 200 OK while the node remains behind the tip. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's Utility::copyInternetAddressAndPort and QUIC client-address paths reconstruct scoped IPv6 addresses through addressAsString and Ipv6Instance. The string includes a percent scope identifier that inet_pton cannot parse, causing an exception or abort. Kernel-provided scoped IPv6 destinations in ORIGINAL_DST transparent-proxy deployments, and affected QUIC connection paths, can therefore terminate the process. The relevant scope boundary is that the HTTP use_http_header override rejects scoped addresses earlier; the advisory's crash path requires a kernel-provided original destination or the affected QUIC path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatched until the host leaves SHOST_RECOVERY and
scsi_run_host_queues() is called - which only happens *after*
scsi_eh_lock_door() returns.
This forms a circular dependency:
- scsi_eh_lock_door(), running in the SCSI error handler thread, waits
for a sched tag held by a requeued command;
- the requeued command cannot complete and release its sched tag until
the error handler thread leaves scsi_restart_operations() and restart
the queues.
For devices with a single driver tag (e.g. USB storage) it is a
guaranteed deadlock and I/O that can never be submitted. This problem
has also been reproduced in our environment.
Locking the door is a best-effort operation, and scsi_eh_lock_door()
already returns silently when the request allocation fails. Pass
BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails
instead of blocking when no tag is available. This breaks the circular
dependency and allows the error handler to finish restarting the queues,
after which the pending commands are dispatched normally. |
| Improper state validation in Downloads in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| In Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4, an empty-body POST to /setUserConfig, dispatched through the web server's SOAP-RPC handler, silently downgrades the administrator password to the default value and corrupts the in-memory authentication state until the device reloads. The handler does not verify the session's privilege level, so any authenticated user can trigger it. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in phoenixframework phoenix (Presence JavaScript client) allows an attacker with ordinary channel access to cause a persistent client-side denial of service against every viewer of a presence channel topic.
This vulnerability is associated with program files assets/js/phoenix/presence.js and program routines Presence.syncState and Presence.syncDiff.
The Phoenix JavaScript presence client checks whether a presence already exists with a bare truthiness test (state[key]) instead of an own-property check. Presence keys can be attacker-controlled, because applications track presences under a username or id supplied by the client. A user who joins a channel choosing a key that is an Object.prototype member name (__proto__, constructor, toString, hasOwnProperty, and similar) makes that lookup return JavaScript's built-in Object.prototype instead of undefined. Because the prototype is truthy, the code treats it as an existing presence and reads .metas.map(...) off it, which throws an uncaught TypeError.
The exception propagates out of the presence message handler, so the local state is never updated and onSync() never fires. Because the malicious key is tracked on the server, it is re-pushed on every presence update and keeps re-throwing, so presence sync stays broken for every viewer of that channel topic until the attacker leaves. Both syncState and syncDiff use the same unsafe existence-check pattern. The impact is limited to the affected topic and is a read-time confusion of the prototype object, not a mutation of Object.prototype (it is not prototype pollution).
This issue affects phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9; phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Fina and 4.2.17.Final, io.netty.handler.ssl.SslClientHelloHandler#decode checks the wrong offset before reading the four-byte TLS handshake header, so a ClientHello whose handshake header spans records can cause an IndexOutOfBoundsException and invoke select(ctx, null). This selects the default SslContext instead of the SNI-specific context. In deployments where per-SNI clientAuth=REQUIRE is the sole mutual TLS gate, the default SslContext uses clientAuth=NONE or clientAuth=OPTIONAL, and no application-layer certificate verification exists, an unauthenticated remote attacker can bypass the protected route's mutual TLS requirement. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
