Export limit exceeded: 407615 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (647 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-114117 | 1 Vyperlang | 1 Vyper | 2026-10-21 | 5.9 Medium |
| Vyper 0.3.8 through 0.5.0b1 contains an optimizer miscompilation in which (msg.value | K) or (len(msg.data) | K), where K is any nonzero integer literal, is compiled to the constant 1 when used as a ternary expression branch under -O gas (the default) or -O codesize. Affected contracts use the wrong value in storage writes, arithmetic, indexes, return values, or events without warning or revert, which can record deposits incorrectly and lock funds. | ||||
| CVE-2026-101394 | 1 Oracle | 1 Siebel Apps - Marketing | 2026-10-21 | 5.3 Medium |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Siebel Apps - Marketing accessible data. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N). | ||||
| CVE-2026-91189 | 1 Eclipse | 1 Threadx Guix | 2026-10-21 | N/A |
| The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer. | ||||
| CVE-2026-72397 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads. | ||||
| CVE-2026-98049 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: zero extend the result of an arena 32-bit cmpxchg bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before bpf_opt_subreg_zext_lo32_rnd_hi32(). That pass emits an explicit zero extension for a 32-bit cmpxchg even when bpf_jit_needs_zext() is false. This is done because on some architectures 32-bit cmpxchg requires explicit zero extension for the dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax if comparison is successful, while BPF semantics declare that each operation on a 32-bit register zero extends it's upper half. is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena cmpxchg misses said zero extension adjustment. This patch adjusts is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC. | ||||
| CVE-2026-90359 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject >8 byte return values on return-reading trampoline paths btf_distill_func_proto() builds the function model used for the fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has accepted a 16-byte __int128 return value since the trampoline was introduced: __get_type_size() returns the integer's type size, and the return-type check only rejected ret < 0. But the BPF trampoline preserves only 8 bytes of the return value (RAX on x86, i.e. R0). For an attach type that reads the target's return value the second half (RDX / R3) is neither saved nor restored, so a program attached to a function returning a 16-byte value corrupts the value seen by the real caller and itself observes only half of it. struct_ops trampolines have the same limitation. This affects the attach types that read the target's return value: fexit, fmod_ret and fsession (plus the _multi variants of fexit and fsession), and struct_ops. fentry/fentry_multi run before the target returns and are unaffected. Reject a >8 byte return value for these attach types in bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for struct_ops in bpf_struct_ops_desc_init(). | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90042 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | ||||
| CVE-2026-80607 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE(). | ||||
| CVE-2026-68295 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Zero-extend signed ALU32 div/mod results ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT. | ||||
| CVE-2026-43843 | 1 Advantech | 1 Adam-3600 | 2026-10-20 | N/A |
| An integer overflow vulnerability in the license manager service could allow an unauthenticated attacker to crash the service. | ||||
| CVE-2026-95107 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block. | ||||
| CVE-2026-98157 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU. | ||||
| CVE-2026-72099 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again. | ||||
| CVE-2026-64176 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD. | ||||
| CVE-2026-53217 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: sync RX data at the hardware packet offset mvpp2 programs the RX queue packet offset, so hardware writes received data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the unused headroom and misses the same number of bytes at the packet tail. On non-coherent DMA systems this can leave the CPU reading stale cache contents for the end of the received frame. Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range offset so the sync covers the Marvell header and packet data actually written by hardware. | ||||
| CVE-2026-53191 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries When a bundle recv retries inside io_recv_finish(), the merge logic OR the saved cflags from the previous iteration with the cflags returned by the new iteration: cflags = req->cqe.flags | (cflags & CQE_F_MASK); Bits listed in CQE_F_MASK are inherited from the new iteration, and all other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the saved cflags. Before this change CQE_F_MASK covered only IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE. When using provided buffer rings (IOU_PBUF_RING_INC) with incremental mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring entry partially consumed, __io_put_kbufs() then sets IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the buffer ID will be reused for subsequent completions. Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above silently dropped it whenever the final retry iteration partially consumed the buffer, and the subsequent req->cqe.flags = cflags & ~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the carried-over cflags had one been present. Userspace would then wrongfully advance it ring head past an entry the kernel still uses. Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the new iteration into the user-visible CQE and stripped from the saved cflags between iterations. | ||||
| CVE-2026-53133 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses. | ||||
| CVE-2026-53110 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Zero-extend bpf prog return values and kfunc arguments s390x ABI requires callers to zero-extend unsigned arguments and sign-extend signed arguments, and callees to zero-extend unsigned return values and sign-extend signed return values. s390 BPF JIT currently implements only sign extension. Fix this omission and implement zero extension too. | ||||
| CVE-2026-52920 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_policy: fix strict mode inbound policy matching match_policy_in() walks sec_path entries from the last transform to the first one, but strict policy matching needs to consume info->pol[] in the same forward order as the rule layout. Derive the strict-match policy position from the number of transforms already consumed so that multi-element inbound rules are matched consistently. | ||||