| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenObserve is a cloud-native observability platform. Prior to version 0.16.0, organization invitation tokens do not expire once issued, remain valid even after the invited user is removed from the organization, and allow multiple invitations to the same email with different roles where all issued links remain valid simultaneously. This results in broken access control where a removed or demoted user can regain access or escalate privileges. This issue has been patched in version 0.16.0. |
| A vulnerability was detected in eCharge Hardy Barth Salia PLCC up to 2.3.81. Affected by this issue is some unknown functionality of the file /firmware.php of the component Web UI. Performing a manipulation of the argument media results in unrestricted upload. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as critical was found in Digiwin ERP 5.0.1. Affected by this vulnerability is an unknown functionality of the file /Api/TinyMce/UploadAjaxAPI.ashx. The manipulation of the argument File leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as critical has been found in Digiwin ERP 5.1. Affected is the function DoUpload/DoWebUpload of the file /Api/FileUploadApi.ashx. The manipulation of the argument File leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as critical, has been found in Softwin WMX3 3.1. This issue affects the function ImageAdd of the file /ImageAdd.ashx. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the EnableTwoFactorAuthRequest SOAP endpoint of Zimbra Collaboration (ZCS) allows an attacker with valid user credentials to bypass Two-Factor Authentication (2FA) protection. The attacker can configure an additional 2FA method (either a third-party authenticator app or email-based 2FA) without presenting a valid authentication token or proving access to an already configured 2FA method. This bypasses 2FA and results in unauthorized access to accounts that are otherwise protected by 2FA. |
| Improper access control for some Intel(R) Graphics software may allow an authenticated user to potentially enable denial of service via local access. |
| DLL Hijacking vulnerability has been found in CENTUM CAMS Log server provided by Yokogawa Electric Corporation. If an attacker is somehow able to intrude into a computer that installed affected product or access to a shared folder, by replacing the DLL file with a tampered one, it is possible to execute arbitrary programs with the authority of the SYSTEM account.
The affected products and versions are as follows:
CENTUM CS 3000 R3.08.10 to R3.09.50
CENTUM VP R4.01.00 to R4.03.00, R5.01.00 to R5.04.20, R6.01.00 to R6.11.10. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
| A vulnerability has been found in mingyuefusu 明月复苏 tushuguanlixitong 图书管理系统 up to d4836f6b49cd0ac79a4021b15ce99ff7229d4694 and classified as critical. Affected by this vulnerability is the function doFilter of the file /admin/ of the component Backend. The manipulation of the argument Request leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in Jiusi OA up to 20251102. This affects an unknown function of the file /OfficeServer?isAjaxDownloadTemplate=false of the component OfficeServer Interface. Such manipulation of the argument FileData leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. |
| Improper access control for some Edge Orchestrator software for Intel(R) Tiber™ Edge Platform may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access. |
| Vite is a frontend tooling framework for javascript. The contents of arbitrary files can be returned to the browser. By adding ?.svg with ?.wasm?init or with sec-fetch-dest: script header, the server.fs.deny restriction was able to bypass. This bypass is only possible if the file is smaller than build.assetsInlineLimit (default: 4kB) and when using Vite 6.0+. Only apps explicitly exposing the Vite dev server to the network (using --host or server.host config option) are affected. This vulnerability is fixed in 4.5.12, 5.4.17, 6.0.14, 6.1.4, and 6.2.5. |
| Swissphone DiCal-RED 4009 devices allow a remote attacker to gain read access to almost the whole file system via anonymous FTP. |
| A vulnerability classified as critical has been found in feng_ha_ha/megagao ssm-erp and production_ssm 1.0. This affects the function uploadPicture of the file PictureServiceImpl.java. The manipulation of the argument File leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| A vulnerability, which was classified as critical, has been found in zhousg letao up to 7d8df0386a65228476290949e0413de48f7fbe98. This issue affects some unknown processing of the file routes\bf\product.js. The manipulation of the argument pictrdtz leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. |
| A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument. This flaw arises from an inadequate permission model that fails to restrict file watching through the fs.watchFile API. As a result, malicious actors can monitor files that they do not have explicit read access to.
Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to August 2025 Cloud-Hosted Flowise, an authenticated vulnerability in Flowise Cloud allows any user on the free tier to access sensitive environment variables from other tenants via the Custom JavaScript Function node. This includes secrets such as OpenAI API keys, AWS credentials, Supabase tokens, and Google Cloud secrets — resulting in a full cross-tenant data exposure. This issue has been patched in the August 2025 Cloud-Hosted Flowise. |
| Improper access control for some Intel(R) Thunderbolt driver software before version 89 may allow an authenticated user to potentially enable escalation of privilege via local access. |
