| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Open-code GGTT MMIO access protection
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: Avoid overflowing userspace buffer on stats query
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions. |
| snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| bincookie is a header-only binarycookies parser. Prior to 0.1.9, bincookie_init_file() in bincookie.h allocates a buffer using the actual .binarycookies file length but trusts the file-controlled num_pages field as the loop bound for byte-swapping page_sizes entries. A crafted file can make the loop read and write beyond the heap allocation, and related unvalidated page sizes and cookie_offsets can drive additional out-of-bounds accesses in page and cookie iteration. Applications that parse an attacker-supplied binarycookies file may crash or suffer heap corruption that can potentially enable code execution. This issue is fixed in version 0.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: keep room for the mac header in dst_dev_overhead()
The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as
the length they are about to push plus dst_dev_overhead(), then push the
new headers and rebuild the mac header below them with
skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom,
but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device,
16 bytes for plain Ethernet.
Where the mac header is longer than that, as it is on ingress through a
VLAN device with reorder_hdr off, the rebuild runs out of room:
skb_set_mac_header(skb, -skb->mac_len) computes a negative offset,
stores it unchecked in the u16 skb->mac_header, and the memmove that
follows writes skb->mac_len bytes about 64 KB past skb->head.
Forwarding plain ping6 traffic through such a device reproduces it on
all five seg6 encapsulation modes and on the rpl and ioam6 inline paths;
skb->mac_header comes back as 65534 on a 704-byte head.
Return the larger of the two. The helper already returns skb->mac_len
when it has no dst, so this only makes the other branch agree, and it
covers every caller rather than each call site in turn. |
| Heap-based buffer overflow in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Windows Error Reporting allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in DNS Server allows an authorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Heap-based buffer overflow in Windows Overlay Filter allows an unauthorized attacker to execute code with a physical attack. |
| Heap-based buffer overflow in Windows Storage Spaces Controller allows an unauthorized attacker to deny service over a network. |
| Gitea's web attachment handler skips its cross-repository ownership check for attachments created before 16 January 2026 and checks permissions against the repository named in the request URL instead. An unauthenticated attacker who knows a private attachment's UUID can request it through a public repository's attachment path and retrieve its contents. This can expose issue and pull request attachments or release assets; the random attachment UUID must already be known to the attacker. |
| phpMyFAQ from 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in GroupController::deleteGroup() that omits privilege-level checks on target groups. Authenticated non-SuperAdmin administrators holding GROUP_DELETE can send a crafted groupId to /admin/api/group/delete to permanently destroy higher-privileged groups and strip members' inherited rights. |
| Heap-based buffer overflow in Windows exFAT File System allows an authorized attacker to elevate privileges locally. |
| FreeRDP 3.10.0 through 3.32.2 contains a heap buffer overflow in the WinPR png_write_data callback that writes past the buffer after a realloc failure. A malicious RDP clipboard peer can supply a large CF_DIB image that triggers out-of-bounds memcpy during PNG conversion, causing a client crash. |
| Heap-based buffer overflow in Desktop Window Manager allows an authorized attacker to elevate privileges locally. |
