| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP ISO-VPN peer to cause an rpd crash by sending a specific ISO-VPN update which is then processed by BMP route monitoring or NSR. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overflow of jump offset in constant blinding
bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into:
AX = imm ^ rnd
AX ^= rnd
if rX op AX goto off
and subtracts 2 from off when the jump is backward. off is s16, so
-32767 and -32768 wrap and the jump goes 32767 insns forward, past the
end of the prog. The jump is inside the patch, hence bpf_adj_branches()
doesn't check it. The kernel crashes when such prog runs with
bpf_jit_harden=2.
Return -ERANGE in such case. bpf_jit_blind_constants() fails the same
way when blinding of other insns moves a jump out of range. |
| An issue was discovered in GStreamer gst-plugins-good before 1.28.2. While parsing an MP4 file, the isomp4 plugin's qtdemux_parse_uuid function may read past the end of a heap-allocated buffer, allowing an attacker to disclose heap memory contents. |
| snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server. |
| libtta through 2.3 contains an integer overflow vulnerability in tta_decoder_init_get_info() that allows attackers to cause a heap buffer overflow on 32-bit builds via unvalidated header fields. Attackers can supply a crafted .tta file with a sample rate of 1 and large samples value, wrapping the seek table allocation and crashing applications. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: reject a kset that overruns its segment
cache_replay(), the writeback worker and the GC worker read a kset of
get_kset_onmedia_size() bytes and advance the position by it. A forged
key_num makes that size exceed the segment's remaining space, so the
advance walks past the segment and trips the cache_pos_advance() BUG_ON.
Reject a kset whose on-media size exceeds cache_seg_remain() before use. |
| Sandbox escape due to incorrect boundary conditions in the Internationalization component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, and Firefox ESR 140.17. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Incorrect boundary conditions in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Incorrect boundary conditions in the DOM: Editor component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Check range in proc_dointvec_ms_jiffies_minmax
Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit
d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with
functions") incorrectly removed. |
| In Eclipse Jetty, `TryPathsHandler` and `TryFilesFilter` can be configured to forward requests to template URIs such as `index?p=$path`, where `$path` is the request path in context.
However, URI paths may contain characters that are reserved in URI queries so that a path of `/s&a=1` when applied to the template becomes `index?p=/s&a=1`, which is interpreted as 2 query parameters: `p=/s` and `a=1`, rather than just one query parameter `p` whose value is `/s&a=1`. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.303 and 3.1.9, deserializing attacker-controlled MessagePack data as System.Object through PrimitiveObjectFormatter can cause excessive memory allocation. The formatter allocates an object[] from each declared array length before the configured object-graph depth limit rejects the input, while nested array headers can reuse the same trailing unread bytes to satisfy per-header length validation. A comparatively small payload can therefore keep many large arrays alive at once. When an attacker can submit such data repeatedly, the allocations can cause severe managed-heap pressure, excessive garbage collection, process termination, or loss of service. Exposure requires an application to deserialize untrusted data through the affected formatter path and permit repeated attacker-controlled submissions, such as a reachable ASP.NET Core SignalR hub method with an object parameter and AddMessagePackProtocol() enabled. This issue is fixed in versions 2.5.303 and 3.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: reject short WMI command responses
ath9k_wmi_rsp_callback() removes the validated WMI header and copies
the number of bytes expected by the waiting command into its response
buffer. A device response shorter than that expectation can therefore
be read beyond the skb payload.
Record -EMSGSIZE for a short response, complete the waiter, and return
the stored status from the command path. This also prevents callers from
consuming stale response bytes as a successful reply. |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix rx Scatter-Gather support
When a received frame is larger than dma_buf_sz, the DMA scatters it
across multiple RX descriptors (rx Scatter-Gather). The secondary RX
buffer (sec_page) was only allocated and programmed when split-header
(SPH) was active, so for regular frames buffer2 was neither allocated
nor backed by a valid mapping. As soon as an incoming frame overflowed
buffer1, the DMA wrote the overflow into the unmapped secondary-buffer
address, triggering an SMMU translation fault on IOMMU-based platforms:
arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90
arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1]
Enable scatter-gather for non-SPH frames on cores that can program an
independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2
as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account
for it in the buffer length computation. Legacy cores have no set_sec_addr
op, so they keep buffer2 disabled.
Since buffer2 is handed to the DMA at page offset 0, the page pool sync
window is widened to cover both buffers in every mode: offset is set to 0
and max_len to dma_buf_sz + stmmac_rx_offset().
The FCS can straddle the buffer1/buffer2 boundary and a descriptor
boundary, so it is now stripped from the tail of the assembled frame with
pskb_trim() instead of from a single buffer, avoiding an unsigned underflow
for frames that overflow a buffer by 1..3 bytes. For single-buffer frames
the XDP program must not see the FCS, so it is removed from the XDP buffer
before the program runs.
Native XDP currently only supports single-buffer (linear) frames. An
oversized frame accepted by the MAC (jumbo enabled) is received via
buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict
the frame is forwarded truncated. XDP multi-buffer support to handle
this case is planned as a follow-up.
AF_XDP zero-copy RX is not covered by this change: a ZC queue still
programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit),
so an oversized frame overflowing buffer1 can still trigger the same
SMMU translation fault. Handling is planned as a follow-up. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, parseUserInformation in src/mms/iso_acse/acse.c checks len for zero before validating the negative bufPos returned by BerDecoder_decodeLength for a truncated long-form length. The continue path therefore swallows the error, reads buffer[-1], resets parsing to the beginning, and repeats the same malformed state. An unauthenticated remote peer can send a malformed AARE PDU during association to cause an infinite CPU loop under a normal allocator or a one-byte out-of-bounds read and process abort when the preceding byte is inaccessible. This issue is fixed in version 1.6.2. |
| A flaw has been found in ztxz16 fastllm up to 1.8.2. Affected by this issue is the function SafeTensorItem::CreateBuffer of the file src/model.cpp of the component Safetensors Weight Loading. This manipulation of the argument data_offsets causes buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Adobe Commerce is affected by an Improper Neutralization of Special Elements Used in a Template Engine vulnerability that could result in arbitrary code execution in the context of the current user, potentially gaining elevated access or control over the victim's account or session. Exploitation of this issue does not require user interaction. Scope is changed. |
