| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected components do not properly authenticate heartbeat messages. This could allow an unauthenticated remote attacker to affected the availability of secondary RTLS systems configured using a TeeRevProxy service and potentially cause loss of data generated during the time the attack is ongoing. |
| A vulnerability has been identified within Rancher Manager whereby the SAML authentication from the Rancher CLI tool is vulnerable to phishing attacks. The custom authentication protocol for SAML-based providers can be abused to steal Rancher’s authentication tokens. |
| CMSaaSStarter is a SaaS template/boilerplate built with SvelteKit, Tailwind, and Supabase. Any forks of the CMSaaSStarter template before commit 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 are impacted. The issue is the user JWT Token is not verified on server session. You should take the patch 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 into your fork.
|
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| A flaw was found in Red Hat Enterprise Application Platform 8. When an OIDC app that serves multiple tenants attempts to access the second tenant, it should prompt the user to log in again since the second tenant is secured with a different OIDC configuration. The underlying issue is in OidcSessionTokenStore when determining if a cached token should be used or not. This logic needs to be updated to take into account the new "provider-url" option in addition to the "realm" option.
EAP-7 does not provide the vulnerable provider-url configuration option in its OIDC implementation and is not affected by this flaw. |
| A vulnerability has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308 and classified as problematic. This vulnerability affects unknown code of the component Domain Handler. The manipulation of the argument Domain Name leads to origin validation error. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| There is a vulnerability in the BMC firmware image authentication design
at Supermicro MBD-X12DPG-OA6
. An attacker can modify the firmware to bypass BMC inspection and bypass the signature verification process |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| Insufficient data authenticity verification vulnerability in Janto, versions prior to r12. This allows an unauthenticated attacker to modify the content of emails sent to reset the password. To exploit the vulnerability, the attacker must create a POST request by injecting malicious content into the ‘Xml’ parameter on the ‘/public/cgi/Gateway.php’ endpoint. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
