| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Adobe Bridge versions 10.1.1 (and earlier) and 11.0.1 (and earlier) are affected by an Out-of-bounds write vulnerability when parsing a specially crafted file. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Adobe Animate version 21.0.3 (and earlier) is affected by a Heap-based Buffer Overflow vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Adobe Animate version 21.0.3 (and earlier) is affected by a Memory Corruption vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system. |
| LibreOffice can import EMF+ graphics, which may be embedded in documents. A heap buffer overflow existed when importing an EMF+ gradient brush. The number of gradient blend points was read from the file and used to compute an allocation size, but that multiplication could overflow, so a small buffer was allocated and then filled as if it were large, writing past its end. In fixed versions the blend-point count is checked against the data actually available before allocating. |
| A vulnerability has been found in FFmpeg 2.0 and classified as problematic. This vulnerability affects the function decode_hextile of the file libavcodec/vmnc.c. The manipulation leads to memory corruption. The attack can be initiated remotely. It is recommended to apply a patch to fix this issue. |
| A vulnerability was found in FFmpeg 2.0 and classified as problematic. This issue affects the function get_siz of the file libavcodec/jpeg2000dec.c. The manipulation leads to memory corruption. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. |
| LibreOffice can import drawings in the DXF format used by CAD software. A heap buffer overflow existed when importing a DXF polyline. The point count taken from the file was truncated to a 16-bit value when the point buffer was sized, while the full count was used to fill it, so a polyline whose point count exceeded the 16-bit range was written past the end of the buffer. In fixed versions such oversized polylines are rejected. |
| In multiple functions of VideoRtpPayloadDecoderNode.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| FreeRDP before 3.26.0 contains a heap-buffer-overflow vulnerability in gdi_CacheToSurface that allows remote attackers to write out-of-bounds heap memory. The vulnerability occurs because rectangle validation clamps coordinates to UINT16_MAX but performs copy operations using unclamped cache entry dimensions, enabling malicious RDP servers to trigger large out-of-bounds writes and potentially achieve remote code execution or client crash. |
| A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| OpenTelemetry-cpp is the C++ implementation of OpenTelemetry. Prior to release 1.27.0, the OTLP HTTP exporters (traces/metrics/logs) read the full HTTP response into an in-memory vector of bytes without a size cap. This is exploitable for memory exhaustion when the configured collector endpoint is attacker-controlled (or a network attacker can MITM the exporter connection). This vulnerability is fixed in opentelemetry-cpp release 1.27.0. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1 to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, during the SST the donor node is interpolating parameters that the joiner sent into the command line. Not all parameters were properly validated which could allow a malicious joiner to execute arbitrary shell commands on the donor side via the rsync SST method. This issue has been patched in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1 to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, a high-privileged MariaDB user could've used wsrep_sst_receive_address or wsrep_sst_donor global system variables to execute shell commands as the uid of the mariadbd process on the galera joiner node. This issue has been patched in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| In the Linux kernel, the following vulnerability has been resolved:
slub: fix data loss and overflow in krealloc()
Commit 2cd8231796b5 ("mm/slub: allow to set node and align in
k[v]realloc") introduced the ability to force a reallocation if the
original object does not satisfy new alignment or NUMA node, even when
the object is being shrunk.
This introduced two bugs in the reallocation fallback path:
1. Data loss during NUMA migration: The jump to 'alloc_new' happens
before 'ks' and 'orig_size' are initialized. As a result, the
memcpy() in the 'alloc_new' block would copy 0 bytes into the new
allocation.
2. Buffer overflow during shrinking: When shrinking an object while
forcing a new alignment, 'new_size' is smaller than the old size.
However, the memcpy() used the old size ('orig_size ?: ks'), leading
to an out-of-bounds write.
The same overflow bug exists in the kvrealloc() fallback path, where the
old bucket size ksize(p) is copied into the new buffer without being
bounded by the new size.
A simple reproducer:
// e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW
while (1) {
void *p = kmalloc(128, GFP_KERNEL);
p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE);
kfree(p);
}
demonstrates the issue:
==================================================================
BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130
Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47):
memcpy_orig+0x68/0x130
krealloc_node_align_noprof+0x1c8/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64
allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago):
krealloc_node_align_noprof+0x19c/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
==================================================================
Fix it by moving the old size calculation to the top of __do_krealloc()
and bounding all copy lengths by the new allocation size. |
| LibreOffice can import documents in the OOXML format (DOCX). A heap buffer overflow existed when replaying deferred parser events for a text box element. A handler object was assumed to be of one type and written to at that type's field layout, but it could be a smaller object, so the write landed past the end of the allocation. In fixed versions the type is checked before the write. |
| LibreOffice can import presentations in the legacy binary PPT format. A stack buffer overflow existed when importing a colour-replacement record. Two fixed-size colour tables were filled from the file, but the write position was not reset between the two passes over the record, so a file whose combined colour counts exceeded the table size wrote past the end of the tables on the stack. In fixed versions the unused second pass is no longer read into those tables. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, during the SST the donor node is interpolating parameters that the joiner sent into the command line. Not all parameters were properly validated which could allow a malicious joiner to execute arbitrary shell commands on the donor side via the mariabackup SST method. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. |
| Issue summary: A signed integer overflow when sizing the destination
buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap
buffer overflow.
Impact summary: A heap buffer overflow may lead to a crash or possibly
attacker controlled code execution or other undefined behaviour.
In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination
size for Unicode output is computed in a signed int: by left shift
of the input character count for BMPSTRING (UTF-16) and
UNIVERSALSTRING (UTF-32), and by summing per-character byte counts
for UTF8STRING. The calculation overflows when the input reaches
around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30
characters) the size wraps to zero, OPENSSL_malloc(1) is called, and
the subsequent character copy writes several gigabytes past the
one-byte allocation.
X.509 certificate processing routes through ASN1_STRING_set_by_NID(),
whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID
size limits cap the input length; no network protocol or
certificate-handling path in OpenSSL exercises the overflow.
Triggering the bug requires an application that calls
ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers
a custom string type via ASN1_STRING_TABLE_add(), with
attacker-controlled input on the order of half a gigabyte or more.
For these reasons this issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as the affected code is outside the OpenSSL FIPS module
boundary. |
