| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| kqueue_fork_copy_knote() indexed into the child's file descriptor table using a knote's file descriptor number without a bounds check. Because the child's table is copied before knotes are transferred, a concurrent thread in the parent could grow the parent's table and register knotes with file descriptor numbers beyond the end of the child's table, causing an out-of-bounds read.
An unprivileged local user may be able to exploit these races to escalate privileges. |
| Substance3D - Stager is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components.
Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. |
| undici is an HTTP client library for Node.js. In versions 7.15.0 through 7.30.0 and 8.0.0 through 8.12.1, its fetch() implementation verifies Subresource Integrity metadata by matching the algorithm token against a lowercase-only set, even though the SRI specification defines the token by its ASCII-lowercase form, so a valid but non-lowercase token such as an uppercase or mixed-case SHA256 is treated as unknown and skipped. When no recognized algorithm remains, undici treats the integrity list as empty and accepts the response, so a server returning a body that does not match the pinned digest passes the check. An attacker who controls only the response body can therefore deliver attacker-controlled bytes to an application that pinned a valid uppercase or mixed-case SRI token, with no integrity error, affecting response integrity only. The issue is fixed in undici 7.30.1 and 8.12.2, which normalize the algorithm token to ASCII lowercase before validation, and users should upgrade to one of those versions or later. As a workaround, use lowercase algorithm tokens such as sha256, sha384, or sha512 in integrity metadata. |
| Off-by-one error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| Out-of-bounds read in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject oversized group bitmap descriptors
ocfs2_validate_gd_parent() only bounds bg_bits against the parent
allocator's chain geometry. A malicious descriptor can still claim a
bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in
the group descriptor block, so later bitmap scans and bit updates can run
past bg_bitmap.
Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent
allocator type and reject descriptors whose bg_size or bg_bits exceed that
capacity. Keep the existing chain geometry check so both the on-disk
bitmap layout and the allocator metadata must agree before the descriptor
is used.
Validation reproduced this kernel report:
KASAN use-after-free in _find_next_bit+0x7f/0xc0
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
_find_next_bit+0x7f/0xc0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375)
ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457)
ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86)
ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786)
ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886)
get_page_from_freelist+0x70e/0x2370 (?:?)
lock_release+0xc6/0x290 (?:?)
do_raw_spin_unlock+0x9a/0x100 (?:?)
kasan_unpoison+0x27/0x60 (?:?)
__bfs+0x147/0x240 (?:?)
get_page_from_freelist+0x83d/0x2370 (?:?)
ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96)
sched_domains_numa_masks_clear+0x70/0xd0 (?:?)
check_irq_usage+0xe8/0xb70 (?:?)
__ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497)
check_path+0x24/0x50 (?:?)
rcu_is_watching+0x20/0x50 (?:?)
check_prev_add+0xfd/0xd00 (?:?)
ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?)
__folio_batch_add_and_move+0x1f5/0x3d0 (?:?)
ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?)
filemap_add_folio+0x105/0x1f0 (?:?)
ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043)
ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?)
down_write+0xf5/0x180 (?:?)
ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?)
__mark_inode_dirty+0x758/0x9a0 (?:?)
inode_to_bdi+0x41/0x90 (?:?)
balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?)
generic_perform_write+0x252/0x440 (?:?)
mnt_put_write_access_file+0x16/0x70 (?:?)
file_update_time_flags+0xe4/0x200 (?:?)
ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?)
lock_acquire+0x184/0x2f0 (?:?)
ksys_write+0xd2/0x170 (?:?)
apparmor_file_permission+0xf5/0x310 (?:?)
read_zero+0x8d/0x140 (?:?)
lock_is_held_type+0x8f/0x100 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix phys BO pread/pwrite with offset
sg_page() returns struct page pointer not (void *) so the scaling
of pread/pwrite is wrong for phys BO and wrong parts of BO would be
accessed if non-zero offset is used.
Last impacted platform with overlay or cursor planes using phys
mapping was Gen3/945G/Lakeport.
(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: bound SRP_RSP sense copy by the received length
srp_process_rsp() copies sense data from rsp->data + resp_data_len,
where resp_data_len is the full 32-bit value supplied by the SRP target
and is never checked against the number of bytes actually received
(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so
at most 96 bytes are copied, but the source offset is not bounded.
A malicious or compromised SRP target on the InfiniBand/RoCE fabric that
the initiator has logged into can return an SRP_RSP with
SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer
is allocated at the target-chosen max_ti_iu_len, so the source of the
sense copy lands past the bytes actually received; with resp_data_len
near 0xFFFFFFFF it is gigabytes past the buffer and the read faults.
Copy the sense data only if it has not been truncated, that is, only if
the response header, the response data, and the sense region fit within
the bytes actually received; otherwise drop the sense and log. The
in-tree iSER and NVMe-RDMA receive paths already bound their parse by
wc->byte_len; this brings ib_srp into line with them. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject oversized EMA RNR lists
nl80211_parse_rnr_elems() stores the parsed element count in a
u8-backed cfg80211_rnr_elems::cnt field and uses that count to size
the flexible array allocation.
Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches
255, before incrementing it again. This keeps the parser aligned with
the data structure it fills and matches the existing bound check used
by nl80211_parse_mbssid_elems(). |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the
min() is signed it keeps the negative value; the value is then passed as
the memcpy() length and sign-extended to a multi-gigabyte size_t. The
copy into the 8192-byte login->req_buf runs far out of bounds and
faults, crashing the target node. The login phase precedes iSCSI
authentication, so no credentials are required to reach this path.
Reject any login PDU shorter than ISER_HEADERS_LEN before the
subtraction, mirroring the existing early return on a failed work
completion, so login_req_len can never go negative. The upper bound was
already safe: a posted login buffer cannot deliver more than
ISER_RX_PAYLOAD_SIZE, so the difference stays at or below
MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing
lower bound needs to be added. |
