Export limit exceeded: 410761 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (7224 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98386 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed. | ||||
| CVE-2026-97605 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure. | ||||
| CVE-2026-97537 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing bugs exposed on the error path of qla25xx_create_{req,rsp}_que(): 1. When dma_alloc_coherent() fails during queue creation, the error path calls the free function with req->ring / rsp->ring still NULL (from kzalloc). The unconditional dma_free_coherent() with a NULL cpu_addr is undefined behavior and can panic. 2. The free functions clear req_qid_map / rsp_qid_map under vport_lock, but the create functions protect the same bitmaps with mq_lock. This provides no mutual exclusion. Additionally, the create error path clears the bit and releases mq_lock before calling the free function, creating a window where another thread can allocate the same que_id and have its ha->req_q_map entry clobbered by the subsequent lockless NULL assignment in the free function. Fix by: - Guarding dma_free_coherent() with a NULL check on the ring pointer. - Using mq_lock (the lock held by all creators) in the free functions to atomically NULL the map entry and clear the bitmap bit. - Removing the now-redundant clear_bit blocks from the create error paths since the free functions handle it atomically. | ||||
| CVE-2026-97480 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: protect against NULL uart->port.dev in register serial8250_register_8250_port() conditionally copies uart->port.dev from up->port.dev only when up->port.dev is non-NULL: if (up->port.dev) { uart->port.dev = up->port.dev; ... } So if both the existing uart slot and up have a NULL ->dev, uart->port.dev remains NULL. The very next ACPI companion check then dereferences it unconditionally: if (!has_acpi_companion(uart->port.dev)) { has_acpi_companion() reads dev->fwnode without a NULL guard (include/linux/acpi.h), so this NULL-derefs the kernel for the remaining no-dev case rather than just skipping the mctrl_gpio_init() initialisation as intended. smatch flags the inconsistency: drivers/tty/serial/8250/8250_core.c:767 serial8250_register_8250_port() error: 'uart->port.dev' could be null (see line 719) Guard the call with a NULL check so register continues to work for callers that legitimately have no parent device (legacy non-OF/non-ACPI registrations). No functional change for callers that pass a non-NULL ->dev. | ||||
| CVE-2026-93285 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: embed f2fs_gc_kthread in f2fs_sb_info Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task | ||||
| CVE-2026-93172 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed allocation check for pgdat->per_cpu_nodestats, which results in a NULL deref when we offset into the per-cpu area. Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing at boot_nodestats so a later online can retry the allocation. hotadd_init_pgdat() returns NULL on failure, which __try_online_node() already maps to -ENOMEM. On failure nothing needs to be unwound: - the node is never marked online - per_cpu_nodestats is left pointing at boot_nodestats - __add_memory_resource() cleans up pending memblock resources - later online attempts retry the per_cpu_nodestats allocation | ||||
| CVE-2026-93128 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might access kbd_backlight even when it was not successfully registered with the LED subsystem. The same happens inside acpi_remove(), where the LED devices are unregistered unconditionally. Fix this by tracking the availability of the kbd_backlight LED device and use devm_led_classdev_register() to let devres take care of unregistering the LED devices during removal. For this the parent device of the LED devices is changed to the native platform device. | ||||
| CVE-2026-93093 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Publish channel state before callbacks Transport setup can enable callbacks before the setup routine returns. mailbox_chan_setup() registers the mailbox client with mbox_request_channel(), and the mailbox controller startup path can enable interrupt delivery before SCMI mailbox channel state has been published. Similarly, smc_chan_setup() requests the optional A2P completion IRQ before the SMC transport has made its cinfo pointer visible. If a pending or spurious callback fires in those windows, the transport RX callback can dereference a NULL transport cinfo pointer. Publishing only the transport-private pointer is not sufficient either: an early callback can enter the SCMI core before scmi_chan_setup() has assigned cinfo->handle. The core derives scmi_info from cinfo->handle in the RX path, so a NULL handle can still fault even when the transport-private cinfo is valid. Assign cinfo->handle before invoking the transport setup callback. Publish the mailbox and SMC transport-private channel state before requesting the mailbox channels or IRQ, and clear the early-published pointers again on setup failure. Also unwind mailbox setup devres resources on failure so an optional RX setup error that is ignored by the core does not leave stale transport state behind. | ||||
| CVE-2026-90345 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P action frame handling without device vif Some P2P action frame paths assume the P2P device vif is always available. That is not true when userspace sends non-P2P public action frames through the primary interface, or when action-frame abort runs after the P2P device vif has not been created. Fall back to the primary vif when aborting an action frame without a P2P device vif, and guard P2P device saved IE access before using it for peer channel search. | ||||
| CVE-2026-90337 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before linking the port and configuring it. Reserve space for the optional driver attribute group because config_port() may populate uport->attr_group during configuration. | ||||
| CVE-2026-90335 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL. | ||||
| CVE-2026-90250 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix storage null-ptr-deref after replacing prog Syzkaller reported a storage null-ptr-deref issue after replacing prog. This occurs in the following scenario: 1. prog A, an empty prog, is attached to a cgrp. 2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the bpf_get_local_storage helper. 3. link_update is called to replace prog A with prog B. The reason is that __cgroup_bpf_replace fails to alloc and assign the required cgrp storage for the incoming replacement prog. Consequently, the new prog inherits an uninit storage, leading to null-ptr-deref panic when kick the new prog. Fix this by rejecting a link update if new_prog's cgroup storage is incompatible with link->prog. | ||||
| CVE-2026-90166 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90149 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. | ||||
| CVE-2026-90148 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease(). | ||||
| CVE-2026-90139 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function. | ||||
| CVE-2026-90084 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: fix workqueue and netdev race in probe/remove Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode does not queue work on a NULL workqueue. Unregister the netdev before destroying the workqueue, and add proper probe error cleanup. | ||||
| CVE-2026-90066 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify ftrace_direct_multi_init() assigns kthread_run()'s return value to simple_tsk without an IS_ERR() check. When kthread_run() fails it returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with simple_tsk holding an error pointer. On unload, ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(), leading to a null-pointer-dereference. Check the return value of kthread_run() with IS_ERR(); on failure, unregister the ftrace direct call and propagate the error code. | ||||
| CVE-2026-90023 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic. | ||||