| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to version 1.37.0, the Vaultwarden icon downloader validates the initial icon host and DNS results but passes favicon URLs parsed from attacker-controlled HTML to get_page_with_referer() without applying should_block_host() to the second-stage host. This flaw bypasses the remediation for CVE-2026-47160, which covered decimal, hexadecimal, octal, and IPv4-mapped IPv6 host normalization, because the second-stage IP-literal favicon fetch does not invoke the custom DNS resolver. A remote unauthenticated attacker can provide a public page whose favicon uses an IP-literal URL, allowing the Vaultwarden server to reach loopback or private and internal addresses. The issue affects instances with internal icon downloading enabled and can expose internal responses that resemble supported images or reveal reachability through timing, status, and cache behavior. This issue is fixed in version 1.37.0. |
| vLLM is an inference and serving engine for large language models. From 0.16.0 until 0.32.0, the /v1/responses endpoint allows an authenticated caller to place an attacker-controlled template in chat_template_kwargs[chat_template] when no server template is configured. ChatParams.get_apply_chat_template_kwargs() preserves that value without enforcing trust_request_chat_template, so the request can bypass the intended trust policy and cause CPU or memory exhaustion through Jinja rendering. This issue is fixed in version 0.32.0. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a mail header injection vulnerability. rcmail_sendmail::extract_inline_images() used the media type taken from an inline image data URI without validating it, so a remote authenticated attacker could inject arbitrary MIME part headers into the outgoing message by placing CRLF sequences in that media type. Upstream fixed this in the commit “Fix mail header injection via media type in an inline image data URI”, which validates the media type with rcube_mime::is_mimetype_valid(). |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains a Server-Side Request Forgery (SSRF) vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by an IMAP command injection vulnerability. A remote authenticated attacker can exploit this via CRLF sequences injected into the _flag parameter of the mail/mark action to execute arbitrary IMAP commands. Upstream fixed this in the commit “Fix IMAP command injection via CRLF in `_flag` parameter of mail/mark action”, which rejects flags containing control, whitespace and IMAP-special characters. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| dbt enables data analysts and engineers to transform their data using the same practices that software engineers use to build applications. When a user installs a package in dbt, it has the ability to override macros, materializations, and other core components of dbt. This is by design, as it allows packages to extend and customize dbt's functionality. However, this also means that a malicious package could potentially override these components with harmful code. This issue has been fixed in versions 1.8.0, 1.6.14 and 1.7.14. Users are advised to upgrade. There are no kn own workarounds for this vulnerability. Users updating to either 1.6.14 or 1.7.14 will need to set `flags.require_explicit_package_overrides_for_builtin_materializations: False` in their configuration in `dbt_project.yml`. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space). |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of code in eval/exec. |
| IBM Langflow OSS 1.0.0 through 1.12.8 could allow a remote attacker with a low-privileged authenticated account to cause the Agentic Assistant to generate or submit component code using these unblocked patterns, resulting in arbitrary operating system command execution on the server. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary commands due to improper control of code generation. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote attacker to trigger pre-existing stored Python component code in a public workflow, executing it under the flow owner's runtime context within the server process. This bypasses the intended trust boundary where public execution paths are restricted to server-trusted component code. |
| Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5. |
