| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: fix use-after-free bugs in error paths
Fix several instances of error paths in which we call
__nvmem_device_put() - which may end up freeing the underlying memory
and other resources - and then keep on using the nvmem structure. Always
put the reference to the nvmem device as the last step before returning
the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: fix use-after-free
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF on lgr list traversal in smcr_port_err()
smcr_port_err() traverses smc_lgr_list.list without holding
smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched()
to free an lgr while it is still being dereferenced.
Hold smc_lgr_list.lock across the traversal. Update
smc_ib_gid_check() to call smcr_port_err() after releasing the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject pkt arguments in mutating subprogs
The verifier tracks changes in how PTR_TO_PACKET registers'
bounds are modified across subprog boundaries. PTR_TO_PACKET
registers are actually passed as PTR_TO_MEM, which is assumed
valid for the entire call. This is not the case with packet memory,
where a pskb_* call may invalidate its memory region.
Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that
may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET
because we would also need to somehow pass the PTR_TO_PACKET_META
or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing
the pointer in the subprog as PTR_TO_MEM, only permit it if the
subprog is guaranteed not to mutate the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: stop Tx NAPI before disabling the queues
bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend()
both disable the Tx queues first and stop Tx NAPI several steps later. A
completion in flight calls netif_tx_wake_queue() in between, and nothing
stops the queue again, so a transmit can reach the rings after they have
been freed.
Close is safe because dev_deactivate_many() stops the qdisc first.
bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both
paths.
KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend
freezes user space before the callback runs:
BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258
Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14
bcmgenet_xmit+0x17f8/0x2258
dev_hard_start_xmit+0x13c/0x588
sch_direct_xmit+0x108/0x340
__dev_queue_xmit+0x1190/0x3848 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: clear TX descriptor on fragment mapping failure
emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for
every slot beyond old_head as soon as that slot's memset()'d local
copy is committed with "*tx_desc_addr = tx_desc", i.e. before the
buffers for that slot have necessarily all been mapped successfully.
If emac_tx_map_frag() then fails on a later fragment, the err_free_skb
path calls emac_free_tx_buf() to unmap and drop the skb, but leaves
the already-written descriptor memory untouched, and tx_ring->head is
never advanced past old_head (the "tx_ring->head = head" store is
skipped by the goto).
So a slot between old_head and the rolled-back head can be left with
TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that
emac_free_tx_buf() just tore down, while software considers that slot
free again. The next successful emac_tx_mem_map() call only rebuilds
old_head itself; if the DMA engine auto-advances into the following
descriptor once it finishes old_head's packet, it will fetch that
stale, already-unmapped address.
emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing
the descriptor as a pair when reclaiming completed descriptors; do
the same in the mapping failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a local reenqueue during
that enqueue. The request gets linked but not scheduled and stays pending
until an unrelated wakeup or preemption on that CPU runs the deferred
actions. The IMMED task sits behind the running task in the meantime. If
nothing runs them before the scheduler is disabled, the request outlives the
scheduler and points into its freed per-cpu area, which the next scheduler
dereferences from run_deferred().
Test the core enqueue flags for the wakeup bit. Only the core's wakeup path
is followed by task_woken_scx(). |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: Clear the sg list when mapping an MR fails
rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA
mapping and registration can fail. On failure, __rds_rdma_map() unpins
the pages and frees the scatterlist, but rds_ib_free_frmr() can still
return the MR to the pool with the stale pointer set.
This leaves the pool with a dangling scatterlist and can lead to local
privilege escalation. KASAN detects the resulting use-after-free when the
MR is later torn down:
BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr
Read of size 8
Call Trace:
__rds_ib_teardown_mr
rds_ib_unreg_frmr
rds_ib_flush_mr_pool
rds_ib_flush_mrs
rds_free_mr
rds_setsockopt
Store the scatterlist in the MR only after DMA mapping succeeds. If DMA
mapping fails, return directly while the MR fields remain clear; the caller
keeps ownership of the scatterlist and its pinned pages. If a later
registration step fails, unmap the scatterlist and clear the MR fields
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: fix use-after-free when auditing a newly loaded policy
new_policy() audits the policy after ipe_new_policyfs_node() publishes it
and drops the new directory's inode lock. A concurrent delete can free
the policy while ipe_audit_policy_load() is still using it.
Audit the successful load under that lock.
[FW: remove model name according to latest guideline] |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: record the PHY only once bringup cannot fail
phylink_bringup_phy() stores the PHY in pl->phydev before its last
fallible step: on a MAC whose phylink ops implement LPI,
phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers
unwind with phy_detach(), which knows nothing about pl->phydev, so a
pointer to a PHY that is no longer attached outlives the failed
connect.
What that costs depends on how the caller got here.
phylink_connect_phy() goes through phylink_attach_phy(), which refuses
to attach while pl->phydev is set, turning a transient MDIO error into
a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()
answers the failure with phy_device_remove() and phy_device_free(), and
it assigns sfp->mod_phy only past that error return, so nothing clears
pl->phydev and it is left pointing at a freed phy_device that
phylink_resolve() and the ethtool helpers go on reading.
phylink_fwnode_phy_connect() has no such check, so a later connect
overwrites the stale pointer and hides the problem. A disconnect does
not: phylink_disconnect_phy() hands that pointer to phy_disconnect(),
and the second phy_detach() on the same PHY drops references the first
one already released.
Found while making a DSA port survive a PHY whose driver arrives after
the switch probes: keeping the port across a failed connect and
retrying is what makes this window reachable.
Publish the pointer after the last call that can fail instead of
unwinding it afterwards. Nothing between the two points reads
pl->phydev, and the registration that follows cannot fail:
phy_request_interrupt() falls back to polling on its own. The PHY-side
state keeps the order it had, so no MDIO operation moves relative to
another. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
