| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out of bounds write in Editing in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: preserve shared-frag marker during coalescing
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors. |
| The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all.
GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it.
The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash.
The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines. |
| ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface.
A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards.
Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment. |
| A segment fault (SEGV) flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFReadRGBATileExt() API. This flaw allows a remote attacker to cause a heap-buffer overflow, leading to a denial of service. |
| FreeRDP before 3.32.0 contains a heap buffer overflow vulnerability in persistent_cache_read_entry_v2 that allows local attackers to corrupt heap memory via integer wraparound in bitmap size calculation. Attackers can craft a persistent cache v2 file with oversized width and height values that causes mismatched entry size accounting and fixed 16 KiB reads, leading to crashes or code execution when loaded. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
| A flaw has been found in Fusion Creators Studio SCP Containment Breach Multiplayer up to 1.295. This issue affects the function BlitzBanks of the component Skynet++ Virtual Machine. Executing a manipulation can lead to out-of-bounds write. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 1.3R is capable of addressing this issue. It is recommended to upgrade the affected component. |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream.
Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. |
| Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a `T.140 RED` out-of-bounds write during `generation accumulation` using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The `chan_sip` channel driver must be installed and configured, and its `textsupport` option must be enabled; `textsupport` defaults to no. `The chan_sip driver was deprecated in Asterisk 20 and completely removed in all later versions.` Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required `chan_sip` driver was removed there. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported. |
| Internally found bugs present in Firefox ESR 115.38, Firefox ESR 140.13, Firefox ESR 153.0 and Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Internally found bugs present in Firefox ESR 140.13, Firefox ESR 153.0 and Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Information disclosure due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Out-of-bounds write in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| EDK2 contains a vulnerability in BIOS where a user may cause “Out-of-bounds
Write”, Classic
Buffer Overflow, and “Incorrect Calculation of Buffer Size” by remote access. Successful exploitation of this vulnerability
can lead to arbitrary
code execution. It could also impact
Confidentiality,
Integrity,
and Availability. |
| Vyper from 0.1.0b4 before 0.3.0 contains a memory corruption vulnerability caused by an incorrect stack tip pointer when internal function calls are performed inside arrays. Contracts placing internal calls in nested array elements, external call arguments, struct literals, or raw_log topics can have memory corrupted, producing incorrect contract behavior. |
| A heap buffer overflow caused by a XIPassiveUngrabDevice request with an out-of-range modifier value in X.Org X Server before 21.1.15 and XWayland before 24.1.14 could be used by authenticated X clients to crash or potentially execute code in X server context. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2, macOS Tahoe 26.7.2. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
